angel eyes install

[GT2003]

I installed the angel eyes fog light today and put in a color led light. Just to clarify some stuff that I had trouble understanding. In the instructions it says to undo the brackts of the angel eye fogs, but it never says anything about how to put them on the brackets. You don't need the brackets that come with them, take them off and discard them or save them, but mount them to the existing stock bracket after using a dremel tool to cut some of the plastic. But don't go to high and cut the hold where the level spring goes b/c you can use the stock leveler for the angel eyes. I will have some pictures soon of where I ran the wires and ect. Just thought this might help you out b/c the instructions were kinda confusing in that part.

Later,
Jon

[Jeremy]

from the instructions page:

"Remove the Optilux bracket from the lamp and set the bracket aside. In order for the Optilux lamp housing to line up with the stock holes on the OEM bracket, you have to install the fog lamps upside down. Reinsert the screws and tighten."


The pictures show you how they need to be mounted.

http://www.grandamgt.com/mod_images/blazer/angeleye1-lrg.jpg

http://www.grandamgt.com/mod_images/blazer/angeleye3-lrg.jpg

[XDRKMANX]

Does anyone have a picture of what they look like at night?

Jeremy:
Did you go to the Chicago Grand Am meeting yesterday?

[RamAirGT22]

Try the search...I think there was a post the other day of them...:thumbs:

[black97gagt]

Do you guy like these fog lights.... I thought about getting them but wasnt sure about them..

[mshu7]

Originally posted by GrandAmGuru
from the instructions page:

"Remove the Optilux bracket from the lamp and set the bracket aside. In order for the Optilux lamp housing to line up with the stock holes on the OEM bracket, you have to install the fog lamps upside down.

Since you have to turn the fog light assembly upside down to mount them on the OEM brackets, does that effect the beam pattern at all? The only reason I ask is b/c I've seen other fog lights that say "top" on one side. It makes me think that if you don't have them right side up, that they won't light up the road to their full potential.

[GT2003]

Oh, on the pics I say they were small and couldn't tell b/c they wouldn't enlarge. THey look great, and they are very bright, almost brighter than my stock headlights.