Autometer Phantom Gauges Question

[DavidScott77]

I've decided on purchasing the electical oil and tranny phantom gauges. My question is, what else do I need to purchase to connect thise gauges from the A-pillar to inside the engine or where ever they connect to. PFYC doesn't stipulate if the guages come with enough wire to run to the connection site. thanks!

[MidwestJosh]

You will need some 14 gauge wire from your local autozone. Not required, but I think it's easier if you use ring connectors to connect the wires to the back of the gauge. That is all you really have to have for this, some good wire strippers too, but if you want to make it easy to connect and disconnect you will need extra stuff.

www.grandamgt.com/mods.html <---Instructions

[MidwestJosh]

Also, it's a good idea to get a few different kinds of colored 14 gauge wire(or 18 if that's what it needs). This way you can tell which wire is the ground, sender, etc.

[DavidScott77]

So the autometer gauges come with EVERYTHING ELSE you will need to install then?