LED turnsignals up back

[EBlend]

Hey
i bought some 3156 leds off superbrightleds.com and they work when car is off and hazard is on, but when i i turn on the car and try to use them as blinkers, they blink real fast. Now i had that problem up front when i put my 3157 leds up there, i got that fixed with a 6 ohm resistors, how do i do that at the back. Thanks

[iceman]

Pin B- Lt Blu/Black of the drivers taillight harness and Pin D-Dk Blue of the passenger side taillight harness are the turn signal leads.

I'm making harnesses to plug n play everything but not gonna have available for a little bit, sorry I couldn't help ya there :(

Let me know how that works. If you want I think you can do this at the hazard switch itself, let me know if you want me to look that up.

[EBlend]

thanks man
thats awsome
i will try to put resistors on there next week

i was also wondering if you could just put one right by the hazard switch, but never was sure :)

[magyver]

i cant get em to blink with two 3157 led's in there!!! (rear) if i have one 3157 led and one stock it works but it wont work with two 3157 led!!! anyhelp with that please!!!

[EBlend]

Originally posted by magyver
i cant get em to blink with two 3157 led's in there!!! (rear) if i have one 3157 led and one stock it works but it wont work with two 3157 led!!! anyhelp with that please!!!

need 2 3ohm 10 watt resistors spliced between the black and the other color mentioned about, 1 resistor per taillight.