View Full Version : rims
gagt13
07-07-2003, 11:44 PM
can anyone help w/ rim manufactors for ga's.. im lookin for 18s in front and 19s in rear.. help appreciated
badassgrandam99
07-08-2003, 05:45 AM
www.tirerack.com ...check them out... i take it that the place you went to yesterday didn't have any???
gagt13
07-08-2003, 08:20 AM
the bolt pattern didnt match
gagt13
07-08-2003, 08:44 AM
wut kinda rims do u have?... cuz they should have more rims w/ the right bolt pattern
'01GTgirl
07-08-2003, 08:56 AM
also try www.superbuytires.com i spent weeks looking at the 27 pages of rims just for the GA. or www.wheelmax.com Be careful with looking on the internet tho, i've found a few that i liked but when i called a local shop to order them, they were discontinuted.
gagt13
07-08-2003, 09:07 AM
thx... my friend told me about wheelmax last nite.
badassgrandam99
07-08-2003, 09:17 AM
only thing with wheelmax is mike that alot of their 5 lug rims are 5x114.3... that's what i have... getting hubcentric rings from wheelmax is a PITA... they tell you that you can get them from a local shop, but you need to make sure you know the center bore (i think that's the right term) for your new wheels... i believe the stock bore is 70 or 73 on the GA's...
gagt13
07-08-2003, 09:22 AM
haha that was my next question are 5x114.3 gonna fit cuz i didnt remember the size u said u had
AMRAAM4
07-09-2003, 09:44 AM
FYI..most companies only make 114.3
GM going with 115 was/is retarded and they shoul dbe slapped for it
Natedog
07-09-2003, 10:01 AM
Originally posted by badassgrandam99
only thing with wheelmax is mike that alot of their 5 lug rims are 5x114.3... that's what i have... getting hubcentric rings from wheelmax is a PITA... they tell you that you can get them from a local shop, but you need to make sure you know the center bore (i think that's the right term) for your new wheels... i believe the stock bore is 70 or 73 on the GA's...
our stock hub bore is 70.3mm
gagt13
07-09-2003, 10:38 AM
thanx for the info on the tires and stuff
ImpetuousRacer
05-10-2004, 05:49 PM
Ok, I'm a dummy. When getting the hub-centric rings, the bore size we get is based on the spec of our car, or the spec of the aftermarket wheel? IS it that All Grand Am's with 114.3mm should use a 70.3 ring? Where is the best place to get these? Thanks.
ZakkWylde470
05-10-2004, 06:45 PM
www.bigwheels.net
im lookin for 18s in front and 19s in rear.. What size tires are you planning on using with these . Unless the diameters are the same the ABS and tire monitor will likely not function properly ?
vBulletin® v3.7.2, Copyright ©2000-2009, Jelsoft Enterprises Ltd.