Camber Adjustment kit?

[PontiacGTboy]

I have Eibach springs. How many degrees of camber adjustment should i need? On PFYC it says to get 2 degrees i need 2 kits. Will one kit be ok? Drop is supposed to be 1.25 inches i think.

[AaronGTR]

With the Eibach springs the drop is small enough they can correct your camber with a regular alignment, so you don't even need the kit. I got the single kit and used it on my car and it overcorrected the camber. They had to turn the bolt back slightly. One bad thing I've heard is sometimes the bolt can shift under hard use and change your camber, so I'm thinking of taking mine out since I plan on racing. Also, on PFYC it says the kit fits the front and rear. It doesn't fit the rear because they use different size bolts. One kit gives you four bolts so you could use them on one or both holes on the front lower strut mount.

[PontiacGTboy]

hum... well when i got the e-mail telling me i had a reply i was getting the e-mail thanking me for shopping with pfyc.com. ohwell. guess ill see what happens on my end

[safemode]

i was told that the rear wheels have no adjustable camber and that if the camber is off on the rear wheels then you bent something.

[AaronGTR]

Originally posted by safemode
i was told that the rear wheels have no adjustable camber and that if the camber is off on the rear wheels then you bent something.

wtf uh...no. Of course they can adjust the rear camber.

[kubiache]

I ordered them when I got my Eibachs, but I didn't need them either. Aligned fine.

[sound_xtreme]

my camber is off by 1/2 degree and I am lowered about 4-5 inches. most places can also notch out your strut bolts a lot cheaper than buying new bolts. plus the notched out ones are more accurate.

[badassgrandam99]

i used the eibach camber kit from tirerack.com a few months after i had my H&R's put on... everything has been good ever since :)

[safemode]

i asked them to adjust a rear tire because it was tested as being off by .1 but they said that there was no adjuster for the rear tires and if it was off by .1 it's because i bent something.