Need CAI pics!

[Marksman]

N-body custom intakes stepped up to the plate and supplied me with hardware to make a full CAI for the 96-98 GAGT. As of now I have the battery tray moved enough to allow a 3-inch pipe to enter the fender. I have to cut the pipe myself so I want to see everyone's intake.
I've run into a few problems and I may have to do a straight pipe from the fender, to a 90* bend, to the MAF to get this to work but I'm working on it.
SO, show me every angle you have on your CAI if you would please. :)
Thanks
-Marksman

[aleroboy]

There is a thread about this very thing with tons of pics.
Oh and who is n-body custom intakes? I've never herd of them

[Red99GAGT]

Originally posted by aleroboy
There is a thread about this very thing with tons of pics.
Oh and who is n-body custom intakes? I've never herd of them

Its me...I'm just doing this on the side. Nothing huge. I don't want to take business away from you John, so i'm leaving it at that. If you have more questions, PM me.

[aleroboy]

oh cool.

[Saccus]

Engines a lil dirty, but heres mine.

http://images.cardomain.com/member_img_a/350000-350999/350701_23_full.jpg

[mzrmatt]

My Civic CAI
http://images.cardomain.com/member_img_a/381000-381999/381338_2.jpg
another
http://images.cardomain.com/member_img_a/381000-381999/381338_3.jpg

[Marksman]

Good pics so far but I would like more of the 99+ pics with an APOC or FDP or whatever intake because that is the way I am doing mine. I need some to help me picture where I have to make cuts and where things like the MAF are going to sit.
I'll search some more for old threads too...
-Marksman

[lightningGA]

here's the one I got from Custom N-Body Intakes:
http://www.grandamgt.com/forum/attachment.php?s=&postid=244993

[GhostGT]

there's pics of the drspeed cai installed on my car here

www.sounddomain.com/id/fromoe

[rfenn]

look under insubordination.net Go to the upgrades and look at the cai and wai in their list

[iceman]

http://images.cardomain.com/member_img_b/273000-273999/273521_41_full.jpg

[Marksman]

Thanks so far! These pics will help me get this thing put together. I just ordered some more materials from N-body intakes so I hope to get this thing done in a week or two.
Iceman, Lightning, awesome pics!
Ice, you have a PM.
-Marksman

[Dr_Kyle]

The Doctor's Setup
http://www.doctorspeed.com/products/cai/cai1l.jpg

http://www.doctorspeed.com/products/cai/cai_l.jpg

[Marksman]

Well I'm getting there slowly...
Is there a bend between the MAF and the Throttle body? It looks as if there is a slight bend in all the pics. Do you use an angled pipe? I have a 45* elbow... Or do you just make up for the bend in fitting the pipe? Angle the pipe in the couplers, etc...
Thanks!!
-Marksman

[loudalero]

On the fdp and the apoc there is a slight bend but I think that you could use just a staight piece of pipe instead and I now that I see pics of the drspeed I like how they have the pipe with holes in for the IAT sensor and the other that i cant remember what its called now,but It has always bugged me that they put both of the senors in the silicone connector of the fdp and apoc.

[5-lO]

the pipe has like a 10 degree angle jsut at the tip, atleast on the APoC ... check my sig for pics

[99alero]

did you try this??
http://www3.sympatico.ca/fjpeters/Aleroinstructions.htm

[Marksman]

Can anyone get me a pic of the connection between the 90* and the pipe going into the fender well? That would be great!
Thanks!
-Marksman

PS - I have the pipe cut for between the MAF and the throttle body, now I just need to get the fender pipe cut and I'll be about set.

[coupe]

I love my doctor speeds CAI stage 3r. Check out my cardomain to see pics of it.