remote start

[RiChWhA]

can someone tell me where the power door lock wire is for a 99 gt. also what color is it? i need it for installing remote start.

[iceman]

White wire, its either in the driver/pass kick or at the BCM, connector 2(gray 24pin), pin A2.

Lock requires a negative trigger, and unlock requires a negative trigger through a 1,500 ohm resistor. Must use relays. Must close doors to lock with a single pulse

[RiChWhA]

im still lost, where is the bcm? and your saying that i need to have the door closed when testing the wire? im so confused, i just want to get done because i think im close to being done.

[Mike Jung]

Originally posted by RiChWhA
im still lost, where is the bcm?...
Originally posted by armith from thread: HOW TO: Override DRLs on a GA (http://www.grandamgt.com/forum/showthread.php?s=&threadid=17559)

...If you are brave enough to mess with the BCM wiring there here you go.

First do not remove any relays or fuses; however, I highly recommend that you unplug your negative battery terminal.. Don't want to risk popping fuses or pooching the Body Control Module (BCM).

The BCM is located on the passenger side under the dash. There isn't much space to work with so to get the most space I would recommend that you remove your glovebox as well as the under dash panels. The BCM looks like a black box about the size of a CD jewel case. It will have 3 connectors.. 1 pink and two gray...

[Blackrider]

Originally posted by RiChWhA
can someone tell me where the power door lock wire is for a 99 gt. also what color is it? i need it for installing remote start.

See What did I tell you Iceman Is the Wiring God ;)