View Full Version : Dr. speed intake Q:
02-28-2004, 09:08 AM
well got the intake from Dr. speed and i was going to install it but the directions leave out how to remove the ractory ram air tubing it anyone can guitde me through this installation it would be very helpful
02-28-2004, 10:39 AM
First, you will have to remove the factory airbox, the top is only held on by screws, so that should be easy enough. Second, remove the MAF and the tubing that goes to the TB, again only a couple screws. Next you will need a 10mm socket to remove the lower portion of the airbox. After this, most of the tubing can be easily removed by just pulling out the push clips that hold it into place (with the exception of the intake snorkel up behind the headlight).
If you have any other Q's or more info, send me a PM and I'll help you out. :thumbs:
02-28-2004, 01:24 PM
cool man thanx i'll post pix as soon as i'm done thanx again
02-29-2004, 09:13 AM
No offense but Dr.speed intakes sux!!! :mad:
j/k haha. :D
You will see business from me soon Dr_Kyle. :)
vBulletin® v3.7.2, Copyright ©2000-2017, Jelsoft Enterprises Ltd.