SLP Fit? [Archive] - GrandAmGT.com Forum

PDA

View Full Version : SLP Fit?


UldLose
04-27-2004, 10:13 PM
I called Slp about the cat back and they told me that they are unsure if the cat-back will fit a 04 GT 2 door. Please tell me nothing has changed since 03.
Thanks
P.S. tried a search found nothing usefull.

jscarano13
04-27-2004, 10:15 PM
it will fit if they tell u it cant be done say check gagt.com nothing has changed. J

UldLose
04-27-2004, 10:17 PM
Damn that was quick thanks i tought soo.

jscarano13
04-27-2004, 10:19 PM
no doubt gotta love that new post deal. J

AznGA
04-27-2004, 10:26 PM
It should fit...

zootelevision
07-04-2004, 12:51 PM
Anyone here with an 04 GAGT have the SLP exhaust? How hard is the installation?


AznGA, are you still having problems with your WAI and exhaust setup? I want to order my exhaust soon, but not if it's going to mess up my car.

tammikm
07-04-2004, 01:08 PM
what problems was he having with the WAI and SLP? I have that setup on now with no problems... 2001 GAGT

coupe
07-04-2004, 01:11 PM
2004 is EXACTLY the same. It will bolt right up. Have no fear ITS EXACTLY THE SAME AS THE 99-03.

AznGA
07-04-2004, 03:54 PM
I never have problems with them.

dxtreme_85
07-04-2004, 09:56 PM
Just watch out!! I just put my SLP on the other day. They actually built my muffler wrong. They had the inlet and outlet pipes that are on the left side switched, so the pipes wouldn't line up correctly. I bitched SLP out and they finally told me that if I took it into an exhaust shop and have it swelled, that they would refund me. Also, they will not have parts to construct the mufflers until mid August, so you might want to consider ordering from somebody who has them in stock. Kyle, do you stock them, or order direct from SLP in New Jersey???

AMRAAM4
07-05-2004, 07:57 AM
The SLP fit my '04 GAGT fine, although Friday the driver side tip was loose and needed to be straightened/tightened :huh:

DoctorSpeed does not offer SLP in any fashion. SLP was a crotch, and hence felt "teh bitch slap" of "ThE dOcToR"

tammikm
07-05-2004, 08:41 AM
I have SLP installed and it seems really loose, it shakes when i start the car, is everyones like this. I know it is hung with rubber mounts but it does seem to move around more so than the stock one did, I can hear it move and bang around over bumps sometimes.. anyway to sturdy it up a bit more?

Pontiac Ninja
07-05-2004, 12:06 PM
I never hear mine rattle at all (just my .02 cents)!!

tammikm
07-05-2004, 12:10 PM
did you just use the hangers that came with it on the stock rubber mounts?

dxtreme_85
07-05-2004, 02:46 PM
One way to cure that is to have an exhaust shop weld some mounts for you. I am one of the few hear that had tips on my factory exhaust and when they were welded on, I had to have the whole exhaust tightened and raised so that they would be in the right spots. My exhaust guy basically just used some hangers and welded them to the frame and muffler/tips

zootelevision
07-06-2004, 04:59 PM
Just watch out!! I just put my SLP on the other day. They actually built my muffler wrong. They had the inlet and outlet pipes that are on the left side switched, so the pipes wouldn't line up correctly. I bitched SLP out and they finally told me that if I took it into an exhaust shop and have it swelled, that they would refund me. Also, they will not have parts to construct the mufflers until mid August, so you might want to consider ordering from somebody who has them in stock. Kyle, do you stock them, or order direct from SLP in New Jersey???


Does anyone know if PYFC has SLP exhaust with the right muffler? Otherwise I guess I'm waiting till August for my exhaust.

AznGA
07-06-2004, 09:57 PM
Make sure you bend the heatshield too.