Attn: 94-95 owners with the 3.1L V6

[Dr_Kyle]

What's up Doc?

I have a prototype "Stage 2" intake for this year and body style. I have taken measurments and made the item, but I need somebody to do a test fit.

Requirements

1) 1994 or 1995 Grand Am with the 3.1L V6 engine w/stock intake setup.
2) Good digital camera and ability to upload pics
3) About an hour or two worth of free time for installation and taking pics
4) Decent knowledge of your vehicle's engine bay (ex. I can't spend time explaining what an IAT sensor is, you have to know this stuff first)

This doesn't necessarily have to be a member of this forum, but I would prefer it.

How it will work

- You PayPal me $40 (just a deposit, I need to make sure I get pics from you!)
- I ship the intake to you.
- You install, take pics BEFORE, DURING, & AFTER installation.
- Make any install notes that you feel are important. I need to know details (ex. needs to curve slightly more, should be an inch shorter, etc.) I don't need a five page essay, but if it doesn't fit, I need to know why.
- Once I have the above info, I cancel the $40 PayPal payment and you keep the intake, completely free.



Post up or PM me if you are interested.

[Gold99HO]

i know its a **** load of people on GAOC with 94-95 GA's looking for intakes post there!!

[Dr_Kyle]

I'm not a sponsor over there. If you would like to post it for me, feel free ;) I would greatly appreciate it.

[sweet98gagt]

gotta work on that damn 2.4....lol

you could also try gmperformancetuning or gmpower (i know how everyone loves that site) there are a few 92-95 guys....) im also thinkin the 3.1 is the same in the 96-98 models too...just the exterior is different...sorta


its too bad ure in florida because i need a setup for the *** r/a hood and im havin a bitch of a time ... right now it looks like a ghetto under my hood

[Dr_Kyle]

Bump

Anybody know a friend with a 94-95?

[3100GASE]

Hey Dr Kyle,
I'd be willing to do it, I have a 94 Grand Am with the 3.1. Just email me or PM me.

[cavingman]

FYI 92-95 will work, not just 94-95

[Dr_Kyle]

^^ Didn't 92-93 use the 3300?

[95-GT]

Correct, the 92-93 had the 3300, and the 94-98 had the 3100. If you want, I can lay my battery in the engine bay and snap some pics for you, and send the CAI back. I also have a PVC pipe layout of a CAI that I was working on. I can send you that this way you can get an idea for the stage 3 bends and length. If your intrested, let me know.

[jer_stud56]

I will do it too. I have a digital camera handy and I'm always willing to do anything for free. PM me.

[Dr_Kyle]

Sorry, I already have a member that is doing the test fit.

[95-GT]

Kyle, do you want my layout, measurments and bends for a stage 3 setup?

[jer_stud56]

Dang. If you ever need another person to do a fittin' for a 94 I'll certainly agree to it. Always wanted one. :(

[Dr_Kyle]

Kyle, do you want my layout, measurments and bends for a stage 3 setup?

Sure man, that would be great. I meant to email you last week but I've been crazy busy. :cool:

[3100GASE]

Here is the final result!

[jer_stud56]

I wish that was mine! :(

[Dr_Kyle]

They will be available on the site very soon. I need to make a few minor adjustments so it will fit better.

[jer_stud56]

What will be a cost estimate for one of those? I'm looking to get one after I make some cash next week and the week after.

[TheShizzy]

COLD AIR!! make one of those

[95-GT]

I am getting the specs for Kyle to make one. I just havent been able to work on my car or measure it all out for him yet cause I have been so busy.

[sunrunner_pei]

I'm not a sponsor over there. If you would like to post it for me, feel free ;) I would greatly appreciate it.

You don't need to be a sponsor to organize a group buy on the GAOC. If you're setting one up please feel free to post it! :)

[ihaveadopeSRT-4]

I built custom Cold Air Intakes for the 3100 way back in the day, they looked like this & I only ever made 2 prototypes
http://memimage.cardomain.net/member_images/9/web/213000-213999/213544_16_full.jpg

The stock airbox is a better setup on the 3100, a warm air intake on a naturally aspirated engine is a waste of money "unless you want the cool sound"

Cold air all the way.

*peace
Dan

[Psi]

Shorter pipe, BIGGER CONE lol.
Just my opinion.

[ihaveadopeSRT-4]

Shorter pipe, BIGGER CONE lol.
Just my opinion.

Shorter pipe, BIGGER CONE = nice warm air intake (your better off with the stock airbox, unless you like the bling bling)

[jer_stud56]

Still waitin for a release on these. Hope the hurricane in florida isn't hurtin you too bad. Saw your site about it. G'luck with it.

[$cash$money$]

Hey Im new to the site, but i know and have all the requirements to your post so if you don't have anyone yet then i will most likely be more than willing to do it for you. but first i want to know if it is going to help my performance at all. i have seen a lot of posts that the stock air box is the way to go! you can email me at biggerdog_15@hotmail.com (Attn: GAGT INTAKE)

Allen

[TurbodreamsGT]

Still waitin for a release on these. Hope the hurricane in florida isn't hurtin you too bad. Saw your site about it. G'luck with it.


make your own its not hard **** my friend has a 94 grand am i'll buy the civic cold air intake and see what i can make out of it..... I amlost have the 99-02 honda accord cold air intake to work with the 99-04 grand am
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=38634&item=7924933668&rd=1

thats the 99+ im working on now if it works i'll have a HOW TO up for it