Cluster Gauge Bulb [Archive] - Forum


View Full Version : Cluster Gauge Bulb

12-16-2004, 08:04 PM
Hi, I need to replace the bulb that lights the back of the tach gauge. By searching this site i have found that its a bulb that is in a special socket. My question is some say that its a 194 bulb others that its a 168(same base but lower wattage). Both of these can be purchased at napa with the socket part number PC194 or PC168. Does anyone know which is the right one, i dont want the bulb to be too bright or too dim.


12-17-2004, 04:19 PM
well, i dont now if this will answer your question but it should be 194. thats what ive gotten from all that i have read. i dont really remember reading anything about a 168. also, while your at it you could upgrade to LED's if you wanted to.

12-19-2004, 10:56 AM
thanks, i just wanted to make sure that the 194 wont be too bright.

12-22-2004, 10:53 AM
hi, Just replaced the bulb. For future reference the correct bulb sizes are pc194 and pc74 both available at napa. The pc74 are used for the highbeam, turn signals and the 3-5k range on the tach. The pc194 are used for the rest. Hope this helps.

12-22-2004, 03:54 PM
glad everything worked out :thumbs: