Plastic Wheel Nut Covers Missing and/or Loose #01-03-10-009 [Archive] - GrandAmGT.com Forum

PDA

View Full Version : Plastic Wheel Nut Covers Missing and/or Loose #01-03-10-009


iceman
08-29-2002, 01:14 PM
Plastic Wheel Nut Covers Missing and/or Loose (Replace Missing Covers and Add Sealant to all Covers) #01-03-10-009


Plastic Wheel Nut Covers Missing and/or Loose (Replace Missing Covers and Add Sealant To All Covers)
2002 and All Prior Year Passenger Cars (Except All Cadillac Models)

with Plastic Wheel Nut Covers

Condition
Some customers may comment that the plastic wheel nut covers are missing and/or loose.

Correction

Important
DO NOT USE a silicone-based adhesive.
Do not apply the *Permatex® around the threads in a circular pattern.
Apply a single bead across the threads approximately 10 mm (0.4 in) in length, 5 mm (0.2 in) in height and 5 mm (0.2 in) in width.

Replace any missing plastic wheel nut covers with the appropriate covers and apply Permatex® #2 Form A Gasket Sealant® to the threads of all the plastic wheel nut covers. Tighten finger tight plus a 1/4 turn with a hand wrench.

*We believe this source and their products to be reliable. There may be additional manufacturers of such material. General Motors does not endorse, indicate any preference for or assume any responsibility for the products from this firm or for any other such items which may be available from other sources.

Permatex® #2 Form A Gasket Sealant® part numbers (available at your local parts supplier)
P/N 80009 (2A/2AR) - 44 ml (1.5 oz) tube boxed
P/N 80015 (2AR) - 44 ml (1.5 oz) tube carded
P/N 80010 (2B/2BR) - 89 ml (3 oz) tube boxed
P/N 80016 (2BR) - 89 ml (3 oz) tube carded
P/N 80011 (2C) - 325 ml (11 oz) tube boxed