View Full Version : R-K Sport bodykit
01gagton18s
09-27-2005, 10:14 AM
I am getting a R-K Sport kit and I wanted to know how it will fit. Will I have to mod anthing on my car? I bought a bodykit from autovisiondynamics a few months ago and it was crap, I could not make it fit and it took a long time to get my money back.
DrFabulous
09-27-2005, 10:28 AM
From what I've heard, the RK sport has pretty good fitment. There's a couple of people on here that have it, I can only think of Rosado right now. You could PM him and see what he says.
SC/T02
09-27-2005, 10:39 AM
Fits well. Do you have a 2 or 4 door? the 4 has some issues with the side door moldings. Just make sure you don't base your hole drilling off of the dimples they give you to use.
AaronGTR
09-27-2005, 01:13 PM
There's plenty of info on this topic if you bother to search. Anyway, the fitment is very good. I do recommend test fitting it before you paint it though to pre-drill your holes. Some of the marks for the holes are a little off and you can get a tighter fit if you locate the holes yourself. Also you can add some screws in places to draw it tighter and eliminate gaps. Right under the headlight there is a snap in post that locates the bumper. You can take that out and put a clip-nut on the fender so you can use a 10mm bolt to draw them together (same as the other 3 bolts that bolt the bumper and fender together). Also you can use 3 or 4 self tapping sheet metal screws along the inside of the rockers where they slip into the wheel wells. Drill into the edge of the fenders and screw them in so the rockers stay in place and don't flap around. Same for the rear bumper.
Rosado
11-24-2005, 07:11 PM
If you do what Aaron said it will fit like a glove..
vBulletin® v3.7.2, Copyright ©2000-2008, Jelsoft Enterprises Ltd.