plastic around steering column [Archive] - GrandAmGT.com Forum

PDA

View Full Version : plastic around steering column


phattymcgee
11-21-2005, 01:56 AM
ok so i want to install some speedhut gauge cluster overlays and i need to get the plastic shroud off of the steering column. there were 3 torx 20 screws on the bottom and that just loosens it up. any help would be fantastic. also, any help with overlay installation would be so awesome. i will give you 8 dollars. :feedback:

Lab Rat
11-21-2005, 06:00 AM
The top cover will snap off. Get a knife or putty knife, slip it in between the top and bottom covers and gently pry until it comes off. It should not break on you. Now the bottom is screwed on there, and you got the screws out but you will probably not get it off the column. That column adjuster lever is in the way. Hope you can get to everything with just the top off or you can f^$% with the bottom to see if it will come off. Good luck, and I don't know about overlays so I guess no 8 dollars for me.

Ajaxus
11-21-2005, 07:21 AM
do a search on the install for the overlays, there's a how to on here for it.

Joker694
11-21-2005, 07:31 AM
http://www.grandamgt.com/forum/showthread.php?t=11063

AaronGTR
11-21-2005, 08:41 AM
Yeah, you don't need to take off the steering column cover. You only have to take out the gauge cluster surround then take out the gauge cluster.