Nissan 350Z

[Metclub]

Do you think it is possible to fit a base 350Z wheel on our cars? The bolt pattern is 5x114.3.

[coupe]

Whats the offset?

[Slim]

Doubtful... The 350Z is RWD and from what I've seen, does not use positive offset wheels.

[Metclub]

it is 17x7.5 +33mm

[AaronGTR]

That would probably fit. It would just stick out a little further than the stock wheel. Having a 1" wider wheel with a smaller offset kind of divides the difference in wheel width so you should have enough clearance on the back side. I have 17x7's with a +42mm offset and they could actually use to move out a little bit.

[westpak]

The rears are 8" wide.

[AaronGTR]

That wouldn't work then, unless you could get two sets of front or two sets of rears. Our cars aren't programed to use staggered wheel and tire sizes between the front and rear. The wheel speed sensor would always be seeing a difference in rotation speed and your traction and abs lights would always be on.