would this muffler work? [Archive] - GrandAmGT.com Forum

PDA

View Full Version : would this muffler work?


chosen_one
09-25-2006, 08:17 PM
Ok i am sorry if i am posting in the wrong spot... but i wasn't sure where I should post it... What i want to know though is if this muffler would work? it says inlet on the left side and outlets on the right... but I would need to put the inlet on the top right one (in the pic) and so the outlets are the bottom left and right ones... would that work? or anyone know what number for muffler would work then?

here is the link:
http://cgi.ebay.com/2-5-2-5-Camaro-Firebird-MagnaFlow-Muffler-SS-12265_W0QQitemZ130022954943QQihZ003QQcategoryZ3363 6QQssPageNameZWD1VQQrdZ1QQcmdZViewItem

thank you!!

sc02grandam
09-25-2006, 08:21 PM
no

you want outlets on both ends

chosen_one
09-25-2006, 08:49 PM
hmm... so that one won't work...? anyone have any model numbers then? i know the 12266 and 12466... but i want 2.5 outlets and inlets... any help?

chosen_one
09-25-2006, 08:59 PM
ok so i found this one the 12266... it says in the pic that it has outlets on both sides... but in the pic it shows one outlet is 2.5 and the other 2.25.... what is with that? and I still need one with 2.5 all around... anyone know what it is? or any ideas?

freakydeaky
09-26-2006, 09:51 AM
this is the muffler i have from magnaflow....camaro/firebird muffler (http://www.magnaflow.com/02product/shopexd.asp?zone=main&id=479)

Mirage85
09-26-2006, 02:24 PM
ok so i found this one the 12266... it says in the pic that it has outlets on both sides... but in the pic it shows one outlet is 2.5 and the other 2.25.... what is with that? and I still need one with 2.5 all around... anyone know what it is? or any ideas?


Its so you can slide a 2.5 pipe over the 2.25 inlet on the muffler, then clamp it together. Its the same as the SLP muffler in that respect. I actually have that muffler sitting here, Im waiting on my pipe expander to get here so I can attempt to install it.

chosen_one
09-26-2006, 09:11 PM
ok so with this muffler... where would you weld the exhaust pipe to...? the top right one?? I need a muffler so i can have dual exhaust ya know? then would the outlets come out on the bottom right and left one? or do you weld the inlet to the left one and the outlets are the two rights ones... please help!!

chosen_one
09-26-2006, 09:18 PM
i need one like the 12266 muffler... but with 2.5 on all sides... would that be the 12265?? and one outlet on each side...

http://www.magnaflow.com/02product/shopexd.asp?zone=mainall&id=477

(12266)