Parting out: HP Turbo 3400 Red 99 Grand AM SE Sedan

[harvester45]

I had an accident today, and I don't think that it'll be worth it to fix the car. I'll post pics in the next few weeks, but suffice it to say that it's seen better days. With that said, I am going to be parting out the entire car, whatever is salvageable is up for grabs. The impact was on the driver's side, but other than the doors and driver's seat, most of it is still good. The turbo kit and everything else are for sale. I'm taking offers on all parts, PM is actually not a good way to do this for me since I anticipate not checking multiple times a day, and not being able to ship for about two weeks. Either offers in this thread or via e-mail are more than welcome. Please take a look at my cardomain to see what all I have on this car. With the exception of the radar detector, everything you see is for sale.

I can't get pictures of anything for two weeks either, but the cardomain ones will give you an idea of what the things look like. The condition of any part I'm gonna sell will be good unless I inform the potential buyer(s) otherwise.

Thanks,

[Grreen99GT]

do you have leather shifter and ebrake? if so i call dibs. start with $25 shipped for both?

that sucks about the accident too

[jackal2000]

i assume you have larger injectors than stock and i am interested in them, so dibs!

[el nino]

What type of Turbo, BOV, and Wastegate were you using.
Also what are u looking to get for the Int. Cool. and piping. If i remember right the HP turbo kit came with turbo manifolds, if so how much are u looking to get for those?
what do u guys think of their products? since ive never seen them in action..

[timberwoof]

I'm interested in Suspension Mods.

[gileyson]

I'm interested in your guage pod/guages and headlights if your willing to part with them.

[gileyson]

Just curious how the car ran with the turbo, did you ever take it to the track?

BTW what happened with your car I hope everythings OK other than the car damage?

[FuriousG]

I'm possibly interested in the Eibachs.

[SpyhunteR]

$100 for the gauge pod

$80 for the polk speakers...

I can and will raise my offer to whatever close you find reasonable, let me know.

AIM: MONKthe1

yahoo: spyonmonk
email: SpyonmonK@yahoo.com

[gectek]

drivers side seat back, price and quote for 79336

[wushdishmeen]

Fuel Rail/Injector Wiring Harness (that is of course if your injector connectors arent different because of the bigger injectors, if they are then how much for all the injectors + the wiring harness)
Driver Side Foglight w/bracket


and depending on the price, im also interested in the black painted center console. Meaning the part where the cupholders are and the part that goes over the HVAC and CD player.


Let me know plz!!

[shogun99]

Dibs On Dual Post Mirror For Passenger Side!!!!!
I Need That!!

[WeibSunder]

Dibs on the entire power window/power lock driver side switch and fogs (mine are turning yellow). How much for the lot shipped to 28438?

[DrFabulous]

Passanger side fender. Name your price.

[mattamd_xp]

What tuner did you use for the computer, and is that for sale? Do you still have the GT white gauge overlay? If so can you do $20 shipped to 01001?

[Mendoza]

How much for the hole turbo kit?

[sjones419]

how much for the amp?

[harvester45]

I'll try to respond to all of you who have written me so far.

Mostly I want to take offers on items, I'll have to check into how much individual items are worth for those of you who want prices, but since there are so many parts, I don't really want to check what they're all worth, so if you make an offer, I can just see if it sounds reasonable, and we'll go from there.

Thanks for the concern, I got banged up a little bit and the driver's side doors are smoked, but I walked away, so I thank God for that. It sucks to have to do this to the car, but I've just gotta cover my losses as best I can.

Grreen99GT: I only have the leather shift and e-brake boots, the handles are the rubber kind. Let me know which you were looking for.

jackal2000: Make me an offer on the injectors, they have <2500 miles on them. They're 42.5 lb/hr size.

el nino: The turbo is a Garrett T3/T4, I'm not sure of the size, I knew the A/R, but I don't have my car with me, so I'll have to check that out. The Wastegate is a Tial 38mm. The BOV is a standard Bosch, nothing fancy at all, but I loved hearing it, it sounded great! Ha ha. I really want to sell the kit as a whole, I'm not sure on the price, I'm just taking offers right now to gauge interest, I won't be able to get it off the car until the 22nd at the earliest.

timberwoof: for the suspension mods, do you mean just the springs, or something else, like the GT rear disc conversion? Either way, shoot me an offer.

gileyson: I'm looking to sell all of those, the headlights do have some hazing on the top half of them, just so you know. The gauges and pod are all in very good shape, with the exception of the Autometer Phantom A/F ratio gauge, it has a dented bezel. The car ran really strong with the turbo, it was a lot of fun, and it pulled really hard. I mostly had it at 5 PSI, but in the last few months I ran it at 7, and it was so powerful. I'm really gonna miss it :(

I never took it to the track, but I definitely surpised a lot of people at lights and on the highway. lol I'm sure that you could run some great times with the kit, after some initial problems, it worked great, it was just the tuning side that I was working on to get more HP out of it.

I was on a turn and hit some water, started going one way, turned into it, the car snapped back and then did a 180 and hit a tree on the driver's side. It hurt, but I'm ok. Thanks for the concern :)

FuriousG: Just let me know, they have about 75,000miles on them.

SpyhunteR: Are you saying with the gauges? If so, I can't do that, the oil pressure gauge alone is worth around 150 shipped, and I'd take 45 shipped for the boost/vac, it goes from -30x to 20PSI, so you probably wouldn't want that for your car. I can do 80 on the speakers, though.

gectek: The impact was on the driver's side, and it actually pushed that into the center consol. I'll take a look at it later, but it might not be salvageable. Let me know if there's anything else you want though.

wushdishmeen: I'll take a look at the injector harness, I don't know where it connects to the car (is it near the alt?), but I can probably do that. The fuel rail is up for offers, but the stock injectors might be spoken for, I'll let you know. Give me an offer on the fog, I don't think that I have any yet. I'll snap some more pics of the center consol when I get home in two weeks, and see if you want them.

shogun99: I'll have to check and make sure the power part of the mirror is working, but it should be. Give me a price.

WeibSunder: Let me know how much you're looking to pay for the switchs and the fogs, I want to sell the fogs as a pair (since they're already boxed up), so if you offer enough, they're yours.

DrFabulous: I'll try to check on that and see how much it's worth, do you know how hard it'll be to get that off?

mattamd_xp: I was using the DHP Powrtuner with the A/D inputs. I'm gonna hang onto it for a few weeks so I can do some work on my buddy's GP, but after that it's probably gonna be for sale.

Mendoza: I'm looking to recover as much money from my car as I can, so right now I'm just taking offers. I'll include all my "custom" coolant lines that I replaced so there was enough space between them and the headers and the downpipe, and the IAT sensor that I JB-welded into the post intercooler piping, the split-lock header bolts, and anything else I had to do that I'm not remembering right now.

sjones419: I think that the amp, sub and box are the only things that I'm not gonna be selling, since I can put those in any new car I get.

[DrFabulous]

DrFabulous: I'll try to check on that and see how much it's worth, do you know how hard it'll be to get that off?




Not too bad if you're tearing apart the whole car anyways. You'll have to remove your hood, front bumper, headlight and wheel for sure. Could I get the black plastic crap on the inside of the fender too? Mine is completely torn out from my accident.

Let me know.

[Ajaxus]

ill take the cdplayer..quote me a price via pm (and if you can find the model number that'd be great)

[harvester45]

ill take the cdplayer..quote me a price via pm (and if you can find the model number that'd be great)

Hi, it's a Sony Xplod CDX-M9905X and here're some specs I was able to get on it:
4 x 52 watts
32,000 Color Screen
MP3 CD
CD Text
XM Ready
7-band equalizer
4-volt F/R/S Preamp Outputs w/HPF/LPF
Auxiliary Audio Video imput (using regular RCA cables)
High and low-pass filter
Clock
Wireless Card Remote

I've also got a really good mounting kit that I used with it, and all the required adapters for the antenna, harness, etc. if you're interested. I'll PM you the price for just the stereo, and you can let me know if you want those other things.

[SpyhunteR]

okay how do you take your money for the Polk speakers?

[Grreen99GT]

yea i thought the actual shifter and ebrake were the leather kind, never mind

[gilzgrandam00]

did u have a rear conversion let me know price???

[lightningGA]

what kind of offers are you getting on the turbo set up....as a WHOLE???
What did it sell for new???
Might be interested!!

[ImpetuousRacer]

Interested in the turbo kit. Let me know cost.

[mattamd_xp]

PM me how much you want for the white face gauge overlay

[55will87]

Can I get everything to do a rear disc brake conversion? How bout 100 shipped for everything.

[gileyson]

I'll take just the gauge pod (minus the gauges) and the headlights for $50 + shipping.

Chris

[el nino]

well if you do decide to part out the kit later let me know.

[harvester45]

SpyhunteR: Hey, I take paypal, I’ll PM you the address.

Grreen99GT: OK, no problem.

gilzgrandam00: Yeah, I have a rear disc conversion setup. No rotors or pads, but it should have everything else (I’m not sure about the e-brake cable). Right now I have an offer of $100, which is too low.

lightningGA: Actually nobody has made an offer yet, but I think the kit was $3,500 new. Like the sellers of the Eaton Superchargers which seem to have pretty good appreciation, I’m willing to take more :)

ImpetuousRacer: I’m taking offers, I really have no idea what this kit will sell for, but I suspect it could be a decent amount.

mattamd_xp: I actually sold the gauge overlays a while ago, I just haven’t updated my cardomain in a while. I’ll try to do that soon, and get a list of parts which I know I have/can recover.

55will87: The rear disc conversion is, to the best of my knowledge, complete with the exception of the rotors and pads. I can’t do $100, though, I paid much more for it, and I haven’t even taken the stuff out of the box yet.

Gileyson: hey, I can’t do 50 plus shipping for both of those, I can probably do $55 shipped for the gauge pod alone, but the headlights would have to be in addition to the pod.

el nino: I’ll be sure to let everyone know if I do decide to part it out, but I hope it doesn’t come to that.

[harvester45]

Here’s the stuff that I have for sale on my car:

SE speedometer 7x,000 miles
Both airbags and module(s) sale pending
PCM sold
Traction control and Hazard light buttons sold
Stock rubber shift knob
Passenger seat parts
Passenger side interior trim
Vents, including dash defrost vent
Trim from around the speedo
HVAC controls sold
Radio bezel
Center consol
Fuse panel covers sold
Rear deck cover
Door reflectors
passenger's window switches
driver's door switches sold
Door handle trim sale pending
All other salvageable interior pieces
Spare tire, spare tire cover, jack and tire iron
UIM
Stock throttle body with or without electronics
Relatively new (<1000 mi) alternator
Washer fluid tank with pump and sensor
3400 heads (can ship with stock springs, but you would have to provide the seats and seals, since I removed those and replaced them with the seats and seals needed for the LS6 spring swap)
3400 Engine (8x,000 mi)
Stock MAF
Stock MAP
3400 Power steering pump
Red SE front bumper cover (some paint blemishes)
Front bumper
Red SE rear bumper
Red SE ribs
Red trunklid with stock spoiler
Red hood (normal rock chips)
Passenger side mirror
Driver side mirror glass
Window regulators
Sedan passenger side glass (I’ll have to check the condition, as the front windows had the problem with scratches)
Cruise control module
EGR valve
Foglights and brackets (some blemishes inside one fog, see pics on my cardomain page)
SE taillights
Rear floor mats
Stock backup lights
18 lb/hr injectors



Non-stock or modified stock items:

Autotap scan tool
42.5 lb/hr injectors sold
Autometer sportcomp electric Boost/Vac gauge
Eibach Pro-Kit Springs (approx 75,000 mi)
SE 15” 5 spoke aluminum rims (some corrosion, lug covers have seen better days, but stay on) with Yokohoma Avid High Performance All-Season Tires (<1,000 miles)
GT rear brake swap kit (no rotors or discs, but you’d probably want new ones anyway)
Front disc brake setup (calipers were rebuilt <4,000 miles ago)
R1 concepts slotted and cross-drilled rotors (<4,000 miles)
Oil pan, with tap for oil return line (can sell with turbo kit, will take some time to remove, I believe the bung is a ¾” size, if I sell this with the turbo kit, all plumbing will be included).
A-pillar tweeter housing with 1” Infinity Kappa CMMD tweeters and crossovers.
Infinity reference 4x6 2 way speaker with silk dome tweeters
GT speedometer 5x,000 miles
3 gauge A-pillar pod (one of the screw covers is missing) sold
Autometer C2 mechanical Boost/Vac gauge (-30/20 PSI)
Autometer C2 electric Oil Pressure gauge (0-100PSI)
Autometer Phantom O2 gauge (bezel is dented)
PLX Wideband O2 sensor with O2 simulator output (Model number: MX???) and gauge
Light grey leather shift boots with charcoal stitching (from redlinegoods.com)
LS6 valve springs with shims and seals (if the seals are reusable?) <3000miles
Ported and Polished LIM (by Ben from 60degreev6.com)
BCM, automatic lights and DRLs disabled
HVAC knobs(removed white illuminated portion, they are now red) sold
Polk 6x9s sold

Anything else I'm forgetting is probably up for grabs, just let me know what you're looking for.

I'll try to post some pics before I complete each sale. Thanks!

[jackal2000]

im going to pass on the injectors. they are bigger than i need, i was hoping for 36ers.

i'll give you $50 for the PCM? shipping to 22060.

[gectek]

dibs on air bags, how much?

$100 plus shipping to 79336?

[harvester45]

dibs on air bags, how much?

$100 plus shipping to 79336?

Sounds good, you want the modules with that?

[gileyson]

I can buy a new 3 guage pillar for $49.99 so how much do you want for the headlights with hazing? I figured 1/2 price on pillar pod ($25)and $25 for headlights with hazing, correct me if I'm wrong?
Chris

[harvester45]

im going to pass on the injectors. they are bigger than i need, i was hoping for 36ers.

i'll give you $50 for the PCM? shipping to 22060.

Sounds good, looks like it'll be about $5 to ship it, you want me to reprogram it back to stock?

[harvester45]

I can buy a new 3 guage pillar for $49.99 so how much do you want for the headlights with hazing? I figured 1/2 price on pillar pod ($25)and $25 for headlights with hazing, correct me if I'm wrong?
Chris

Yeah, but this is a shipped price, it'll come in the original box. I have no idea how much shipping to Canada would even be. I don't even know the price for headlights with hazing. If you can find me a quote for shipping on a gauge pod sized package from 45879. I don't know what headlights with hazing go for, but I can probably clean them up with a buffer.

[jackal2000]

Sounds good, looks like it'll be about $5 to ship it, you want me to reprogram it back to stock?


nah, i have DHP as well. paypal?

[wushdishmeen]

wushdishmeen: I'll take a look at the injector harness, I don't know where it connects to the car (is it near the alt?), but I can probably do that. The fuel rail is up for offers, but the stock injectors might be spoken for, I'll let you know. Give me an offer on the fog, I don't think that I have any yet. I'll snap some more pics of the center consol when I get home in two weeks, and see if you want them.


The injector harness is basically connected at two points near the alternator, then the wire travels under the UIM and in between the Fuel rail and connects to each injector then there is a sensor that connects to the driver side of the LIM. What I'm not sure though is if the SE has the same injector harness as the GT? If you can tell me that would be good.

The Driver side foglight I have works, but the mounting bracket cracked in half during a small fender bender, and I basically taped it with ducktape and it works but pisses me off. So this isnt REALLY important but if i could get it for cheap id replace it. You cant just replace the mounting bracket i dont think thats what sucks.

But anyway, if all goes well with the parts matching then Id offer $40 for both the harness and foglight. to start, if ur offers go up well see.

[gileyson]

I'm tearing the headlights apart so I'm not concerned with the lens condition (as far as hazing goes) so buffing it will have no affect to me. I'm not concerned with shipping cost right now, I just want to know what you want for the headlights and gauge pod?

The shipping will be based on weight and box size, if you can figure that out and get a quote from USPS to Ottawa, Canada. K1B-5B7, I'll pay shipping on top of the $50. Sound good? Paypal will be good for me.

[harvester45]

nah, i have DHP as well. paypal?

Sounds good, I sent you a PM with the info.

[harvester45]

I'm tearing the headlights apart so I'm not concerned with the lens condition (as far as hazing goes) so buffing it will have no affect to me. I'm not concerned with shipping cost right now, I just want to know what you want for the headlights and gauge pod?

The shipping will be based on weight and box size, if you can figure that out and get a quote from USPS to Ottawa, Canada. K1B-5B7, I'll pay shipping on top of the $50. Sound good? Paypal will be good for me.

Looks like it'd be about 14 shipping for just the gauge pod. I'd basically like to see 40 out of the pod before shipping. It's in like-new condition, the only thing missing is the one screw cover. For the headlights, I don't know what a reasonable price on them would be, so I'll have to take a look at that. But if I can polish them up, then they might be worth more to people who are concerned about the lense condition.

[jackal2000]

money sent for the PCM

[harvester45]

The injector harness is basically connected at two points near the alternator, then the wire travels under the UIM and in between the Fuel rail and connects to each injector then there is a sensor that connects to the driver side of the LIM. What I'm not sure though is if the SE has the same injector harness as the GT? If you can tell me that would be good.

The Driver side foglight I have works, but the mounting bracket cracked in half during a small fender bender, and I basically taped it with ducktape and it works but pisses me off. So this isnt REALLY important but if i could get it for cheap id replace it. You cant just replace the mounting bracket i dont think thats what sucks.

But anyway, if all goes well with the parts matching then Id offer $40 for both the harness and foglight. to start, if ur offers go up well see.

I think that you should be fine on the injector harness, I know that the 99s (which we both have) use 18lb/hr injectors, and I'm almost positive that it's by engine and year, nothing else. Yeah, I had a potential sale at 60 shipped for the fogs as a pair, so I'm gonna have to hold off on the sale right now. I think that you can take the lights off of the brackets, but I'm not sure. Let me know.

[gileyson]

Check into the headlights and let me know but PFYC sells the gauge pod for $49.99 and so does glowshift. I'm only saving $10 over a brand new/mint gauge pod.
BTW brand new "cleared" headlights go for $160 on ebay, and that's with no amber coloured turn signal covers or hazing, just for reference. I have hazed headlights myself and I'm just looking for a set to clean up without taking my car of the road .
Chris

Chris

[bballr4567]

Just so you know, the newer gauge pod that is being sold by PFYC is pretty crappy. Im pissed at how flimsy it is and it doesnt even match my interior color. His might be an older one that is a better mold.


BTW sucks about the car!!!! What are you getting next?

[gileyson]

OK how does the Glowshift compare is it pretty ****ty too??? WTF, $50 is $50 and that's what ALL the companies are selling their pods for so MYFB.
Chris

[bballr4567]

MYFB?? Thats a new one to me.

[gileyson]

I won't tell you what it means then.

[bballr4567]

Yea thats what I thought. Go ahead and complain about the price he sets for HIS parts. Dont buy them then.

Just trying to help out an ass I guess.

[WeibSunder]

How about $30 + shipping for the fogs and switches? Shipped to 28438

[gileyson]

I'm not complaining about the prices, I'm just stating what they go for brand new from several vendors and what exactly does it have to do with you anyways.
MYFB. BTW PM me and I'd be happy to tell you what it means!!!

Chris

[bballr4567]

Hmmm I wonder how many people want to sell to giley now???

BTW what color interior is your car?? I might be interested in the passenger A pillar.

[edro]

How much for the injectors? I want them. how much for the eibachs as well?

[silvergtjrad]

$40 shipped for the ls6 springs?

[O1GAGT]

E-mail sent

[gectek]

Sounds good, you want the modules with that?


yah ill take it all if you want to take it out...just tell me when its ready

[gileyson]

bballr4567 why don't you pm instead of ruining this sale thread?

[harvester45]

Gileyson: I don’t have to sell the gauge pod to you, I was just trying to work out a deal with you. The lowest I will go for just the pod is $50US shipped. That has to do with the fact that you’re in Canada, etc. If you want to compare that to a new one shipped from PFYC (which would be indistinguishable from mine other than mine is missing a cheap button piece, and mine is evidently of higher quality than the new ones), you’re saving $15US, which is about 25% cheaper. If that is unacceptable, I’m sorry, that’s the best I can do right now.

bballr4567: Yeah, I wasn’t happy about it, but I guess it’s a chance to get out of some debt and save on gas $ lol. I don’t know what I’m getting next, I like the Mazda 6s, F-bodies, and GTOs, but those might be out of my price range, since I have a few more years of school ahead of me.

My interior is grey, so the pillars themselves are tan, let me know if you’re still interested in the pillar.

WeibSunder: I can’t go $30 plus shipping for the fogs and the switches. I think the fogs are worth a little more than that by themselves. The switches do have the normal wear, I’ll try to post some pics in a week or so (I’m at school for at least this week, and maybe until the 17th). How about 20 plus shipping for the window switches? I did a quick search, and that looks like a reasonable price. Let me know.

edro: Did you want the stock injectors or the 42 lb ones? The stockers are possibly spoken for, but the larger ones are still up for sale. For the Eibachs, IDK, I have to get them off of the car, which involves renting some air tools and I might not get around to that until May. I just don’t have a lot of time, but if I can find somebody with the tools, I might give it a shot over spring break.

Silvergtjrad: On the LS6 springs, I was thinking more like $80 shipped, and that’s with the shims that you need, and I don’t know if you can use the seals again, but if you can, I’ll include them, too. No retainers or keepers, though, unless you want to pay extra.

Gectek: sure thing, if you have any instructions on how to get them out, that’d be great, but I should be able to figure it out (you unhook the battery after you get them out right? lol).


If I forgot anybody, please let me know, I’ll try my best to keep up with the offers and order of interest on items, but do call me out on it if I forget. Thanks!

[WeibSunder]

I'll do 20 plus shipping for the switches, just if you can shoot a couple pics my way. My driver side window switch won't work unless I push it all the way down to auto to just make my window go down.

[harvester45]

I'll do 20 plus shipping for the switches, just if you can shoot a couple pics my way. My driver side window switch won't work unless I push it all the way down to auto to just make my window go down.

Sounds good, If I get home this weekend I'll snap a few pics for ya.

[wushdishmeen]

Okay well.

For the injector harness I got an offer from gectek to sell me it for $20 + shipping, so if you can beat that price i would buy from you. otherwise ill probably go through him.

i still call dibs on the foglight if the other guy falls thro, cuz i saw other people asking for them.

let me know

[bballr4567]

Well with all the money you are going to make from the sale of the Turbo kit you should have a nice little down payment on car. A GTO would be hot but I also love the Mazda 6s!!!

Yea I will let you know about the pillar piece later on today. Thanks

[DrFabulous]

Let me know when you start tearing the body apart lol

[WeibSunder]

You got yourself a sale, thank you. And I forgot to ask, but are they painted black to match your interior? And are they in good electrical condition?

[harvester45]

Wushdishmeen: I don’t want to steal gectek’s sale, $20 plus shipping was right around what I’d want anyway. For the fogs, nobody has really offered anything around what I’m looking for ($60 shipped for both), so they are still fair game.

bballr4567: True, if I didn’t have such massive debt right now. Lol I still have to figure out how I’m gonna pay for school for the next three years, but you can’t skimp on the car. Ha! Let me know about the pillar.

DrFabulous: Ha ha. Will do. Hey, for the Front right passenger fender, I just remembered that it is a little bent at the extreme bottom of it (right where it meets the side skirt/door) it’s not really noticeable, but it is there. I’ll get some pics of it when I get home, but if you want a perfect one, I don’t want you to have to wait on this one if it’s not gonna be what you want.

WeibSunder: Good deal, I’ll PM you my paypal. I didn’t paint them black or anything, I can get some pics this weekend or next if you want, but the writing is all still there and everything. All the buttons, etc. work great.

PCM and Polk 6x9s are sold, sales pending payment on driver's window switches, airbags, and passanger A-pillar.

[DrFabulous]

Take a pic and let me see, I'll let you know before you go thru the trouble of tearing it off.

[gectek]

i can get you an exact chart on how to tear them out, ill email it to you

[El_Diablo]

sorry, haven't been on here in a while and i must admit i just scanned the first page, kind of in a hurry today

i know this is going to sound stupid but this monitor sux, is your interior black or grey? im looking for any and all interior panels for a 4 door in black so if you have anything that will work lemme know, also interested in your gauge cluster and as much of the harness as you can get for me from it to the PCM and the connectors used for it

i dont spend much time on here so if you can please email me at antis0cia7@yahoo.com

i will check back but it may take some time, thanks :)

[harvester45]

DrFabulous: I’ll do that the first day I get back home.

Gectek: That’d be great, thanks!

El_Diablo: I sent you an e-mail.

[lastyear4gt]

I need those injectors. How much are you looking for them?

[harvester45]

I need those injectors. How much are you looking for them?

I replied to your PM. Let me know what you want.

[harvester45]

lastyear4gt: your PM box was full, so I sent you an e-mail.

[eric99gt]

let me know what you're looking to get on that turbo setup. I've been looking to do this for awhile but I have alot to learn. Schools been killing the learning with the car lol.

[gr1m]

$45 for gauge pod shipped to 11710?

[DrFabulous]

Sounds good man. No huge rush, I can't replace mine in this crappy weather anyways.

[harvester45]

$45 for gauge pod shipped to 11710?

I just sold the gauge pod this morning. Sorry :( I'll update the thread.

[lastyear4gt]

Sent payment for injectors and harness. Thanks!

[rap219]

PM sent

[harvester45]

PM sent

I replied, let me know man.

[harvester45]

Sent payment for injectors and harness. Thanks!

Payment received, both will go out when I get home next weekend (I decided to work up at school this weekend, putting more money toward my "new car fund" lol). Don't worry, I'll pack them up nice and safe :).

Thanks!

[methos]

any dash/interior pieces...

A-pillars!!! all four(front and rear)
pillar in the middle that covers the seat belts
tweter mounts
door lock switches and unit
vents
defroster vent
etc...anything else u want to price. let me know

[harvester45]

any dash/interior pieces...

A-pillars!!! all four(front and rear)
I can get you at least driver's side front and passenger rear, I'll have to check on the condition of the driver's side rear and I'm waiting on an offer for the passenger side front one, but I'll let you know.
pillar in the middle that covers the seat belts
What is this? The center consol? I have it, but I'm not sure what condition it is in, or if I can get it out, since my driver's seat is not uncomfortably close to it.
tweter mounts
The setup is such that I can only sell these with the tweeters in them. They're on Crutchfield, Infinity Kappas, I paid 120 for them, great quality.
door lock switches and unit
I have all but sold the driver's door one, but the other three are still up for sale
vents
Give me an offer on these.
defroster vent
Same thing here, I really don't know what these go for, and I've got mid-terms next week, so I should be studying right now... lol
etc...anything else u want to price. let me know

Hope that covers it, if you really want me to price them, I will, but I'm pretty busy this week, trying to answer e-mails and posts, and do school work lol

[methos]

any dash/interior pieces...

A-pillars!!! all four(front and rear)
I can get you at least driver's side front and passenger rear, I'll have to check on the condition of the driver's side rear and I'm waiting on an offer for the passenger side front one, but I'll let you know.
pillar in the middle that covers the seat belts
What is this? The center consol? I have it, but I'm not sure what condition it is in, or if I can get it out, since my driver's seat is not uncomfortably close to it.
tweter mounts
The setup is such that I can only sell these with the tweeters in them. They're on Crutchfield, Infinity Kappas, I paid 120 for them, great quality.
door lock switches and unit
I have all but sold the driver's door one, but the other three are still up for sale
vents
Give me an offer on these.
defroster vent
Same thing here, I really don't know what these go for, and I've got mid-terms next week, so I should be studying right now... lol
etc...anything else u want to price. let me know

Hope that covers it, if you really want me to price them, I will, but I'm pretty busy this week, trying to answer e-mails and posts, and do school work lol

yeah...just price the stuff and ill let u know.
the center pillars im talking bout is the ones b/w the doors when ur sitting in the car. they are a little tricky getting out. it covers the front seat belts

[ImpetuousRacer]

Ill start first bid on HP Turbo Setup for $1500.
Other's feel free to outbid me.

[zhd1000]

hey if you have it.. i need the front air dam..

[shogun99]

I'l give you 30 bucks for the mirror shipped
sounds good?
PM me bro
thanks

[gilzgrandam00]

harvestster u got pm let me know what u think

[rap219]

Let me know whats up bro....Thanks

[harvester45]

Methos: Ok, I’ll try to check on the prices, but it might take some time, since I’ve got a lot of people asking for prices. It’s easier and takes less time for me to say “yes” or “no” to offers, that’s why I prefer to do it that way, cause that way I don’t have to do so much research lol. School is a little crazy this week, but I will try to check on that for you within the next week or over break. If you do get a chance, though, please don’t hesitate to make an offer.

ImpetuousRacer: 1,500 is pretty low, but at least you made an offer. Anyone else? (if all else fails, I might have to take you up on your offer :) )

zhd1000: I don’t have to air dam anymore, it was actually one of the first things to break on my car. lol Let me know if there is anything else you want, though.

shogun99: PM sent, sorry it took me a little while, I’ve been working a lot at school this weekend, trying to make some $ back to pay off some massive debt.

gilzgrandam00: I replied to yours, too let me know.

rap219: Sorry it too a little while to reply to you, but I’ve just had a few chances to log in and see if there were any immediate sales in this thread. I did send you a PM (finally :) )

[methos]

just curious...what color is ur interior?? brown or gray?

[IMNMBR2]

pm sent

[harvester45]

methos: my interior is grey, with tan pillars.

IMNMBR2: PM replied to.

To all who have paid for parts, I'm gonna be home this weekend and all next week, and all parts will go out as fast as I get them taken off.

Thanks,
Harv

[wushdishmeen]

so harvester, since no deals yet...how about 15 for the driver side fog light?

[harvester45]

so harvester, since no deals yet...how about 15 for the driver side fog light?

I actually think that I just sold them (just awaiting payment), I have a lot of interest in them, but if everything falls through, we can start dealing :).


By the way, my Sony Xplod CDX-M9905X is back up for sale, the potential buyer had more pressing financial needs.

Here're some specs I was able to get on it:
4 x 52 watts
32,000 Color Screen (can play user input video, and store user input pictures)
MP3 CD
CD Text
XM Ready
7-band equalizer, with editable presets
4-volt Front/Rear/Subwoofer Preamp Outputs w/HighPassFilter/LowPassFilter
Auxiliary Audio Video imput (using regular RCA cables)
High and low-pass filter
Clock
Wireless Card Remote

Looking for 250 before shipping.

I've also got a really clean mounting kit that I used with it, and all the required adapters for the antenna, harness, etc. which I can include for a little more.

[harvester45]

Spark notes for those who don't want to read through all the earlier posts:

Turbo kit is still available, the most I've been offered for it is $1,600. That's pretty low, and I won't sell it if I don't substantially recover what I invested (after all is said and done, 4,000 plus), so be advised when making offers.

I'll list everything that has sold so far:
3 Pod gauge pillar
Polk 6x9s
42 lb injectors
injector harness
stock PCM

Everything else is still fair game, unless I'm closing the deal (but haven't recieved payment), but I won't list anything like that in case they fall through.

Please make offers, don't ask for prices, 'cause I don't have a lot of time to check what everything is worth just for people to tell me that they don't want them after they find out.

Thanks!

[harvester45]

Here's an update for all those who have bought and paid for parts so for:

I will be home tomorrow (Friday) evening, and will begin removing all sold parts from my car. It is my goal to have all of these parts ready to ship on or before Monday (if I can ship a few things Sat, then I will). Those of you who I said I would ship ASAP, you know who you are, and I will be sure to do so. Thanks for the patience, as I had to finish up some school work this past week! lol

Anybody else who is interested in parts, this next week is gonna be one of the best times for me to remove and ship parts. After that, it's gonna be between track meets and classes on the weekends (so maybe Sunday afternoons) until I'm done with school for the summer.

Thanks!

[gilzgrandam00]

u got pm let me know

[WeibSunder]

Here's an update for all those who have bought and paid for parts so for:

I will be home tomorrow (Friday) evening, and will begin removing all sold parts from my car. It is my goal to have all of these parts ready to ship on or before Monday (if I can ship a few things Sat, then I will). Those of you who I said I would ship ASAP, you know who you are, and I will be sure to do so. Thanks for the patience, as I had to finish up some school work this past week! lol

Anybody else who is interested in parts, this next week is gonna be one of the best times for me to remove and ship parts. After that, it's gonna be between track meets and classes on the weekends (so maybe Sunday afternoons) until I'm done with school for the summer.

Thanks!


Hey man, do you think you can snap a pic of those driver window controls, I still want them, I just wanted to let you know that I haven't lost interest.

[lastyear4gt]

You've got PM!

[WeibSunder]

Payment sent for master window controls.

[harvester45]

Update: For eveyone who ordered from me, your purchases have been shipped! I have delivery confirmation #s for all of my US buyers, and I will PM those to you tonight. Thanks for your business, and please let me know when you get your items and if you're satisfied with them. Thanks again!



Payment sent for master window controls.

Payment recieved. I will pack these up tonight and try to have them shipped by tomorrow. Thanks!

Harv

[DrFabulous]

Fender pics?

[harvester45]

Fender pics?

Sorry, I've been swamped, I'll try to snap some tonight! Thanks for the reminder!

[jazzman]

how much for the wideband setup???

[harvester45]

how much for the wideband setup???


I think it was 270 new without shipping. I was hopeing to get about 230 shipped out of it.

[cmtapanes]

so what's the deal on the turbo?

[harvester45]

so what's the deal on the turbo?

So far the highest offer is 1,600, but that is really low. It's still for sale.

[harvester45]

Dr. Fabulous, I posted the pics of my fender on my cardomain, they're at the bottom of the page. It's somewhat visible, but only if you're looking for it, and all of the damage is at the bottom where I took most of the pics.

[DrFabulous]

I messaged you in private.

[IMNMBR2]

i offered more:)

[WeibSunder]

Got the switches today...great condition and works great. Thanks a lot for selling me a much needed item!

[lightningGA]

hEy do you have the plastic piece that goes between the tail lights in the trunk??

[harvester45]

IMNMBR2: You did? My bad, I must have accidentally deleted that PM. I remember somebody saying they were really interested and didn't want to low-ball, but I don't remember an offer. Sorry, let me know what it was if you're still interested.

WeibSunder: Glad those got to you and that you're happy with them. Thanks, you've been a great buyer, let me know if there's anything else you need.

lightningGA: I believe so, these aren't part of the tail lights are they?

I'm gonna try to pull some more parts tomorrow and Sunday, and post pics for those of you who have asked. Thanks for you patience everybody.

[FastlaneV6GT]

How much would you be willing to sell the P&P UIM/LIM for? Send me a PM and let me know if you would :)

[awaadster3]

check your PM and email. also are you willing to sell your rear seat?

[lightningGA]

lightningGA: I believe so, these aren't part of the tail lights are they?

Nope...this trim piece you can see here in front of the sub. What shape is it in...any scuffs, scratches, etc.

What would you want for it shipped to 12019 (NY)??

http://memimage.cardomain.net/member_images/12/web/2316000-2316999/2316744_4_full.jpg

[EnVeE 02]

I sent you a pm about the interior trim pieces( door handles, shifter ring) let me know if your still interested in selling them to me!

[harvester45]

Sorry I've taken a while to reply to some of these posts!

FastlaneV6GT: I think I replied to your PM, let me know if you got it and what you decided.

awaadster3: yeah, if I can get the seat out, I'll sell it. How far from the Ohio state line are you? I'm down there, but maybe we could meet up if you buy the seat, since shipping would be killer. I could just bring all the other stuff you want, too.

lightningGA: I pulled that piece earlier, it's in decent condition, there are a few scuffs, but I can take pics this weekend or next if you want.

EnVeE 02: I think I PMed you back (I can't tell, 'cause I keep having to archive all of my old PMs lol) but that sounds good, just get me a list, and if they're not spoken for, we'll get a price figured out.

Thanks!

[FastlaneV6GT]

Never got your PM...sorry. Can you try sending it again?

[lightningGA]

lightningGA: I pulled that piece earlier, it's in decent condition, there are a few scuffs, but I can take pics this weekend or next if you want.

Yeah shot me some pics so I can check it out....thanks.

[harvester45]

Yeah shot me some pics so I can check it out....thanks.

Hey, I got the part off, and I totally forgot to snap the pics! I'll give it a shot next weekend. It's just been kind of crazy on weekends, since I only get to be home for less than a day before I have to head back to school.

[gectek]

so how does the seat back look on the pass side? if it is still good ill take the seat back from the pass side. the springs on the back of my seat broke. ill get back with u on an offer

[gectek]

hey do you have the seat bottom from the drivers side. like the rails and seat bottom...all i really need is the seat bottom, with the rails. all it takes is 4 bolts after you take the cushion off and maybe remove the lumber adjustment if you can...i dont care if you cut the cable or what, all i need are the rails on the bottom removed from the seat pan

[harvester45]

hey do you have the seat bottom from the drivers side. like the rails and seat bottom...all i really need is the seat bottom, with the rails. all it takes is 4 bolts after you take the cushion off and maybe remove the lumber adjustment if you can...i dont care if you cut the cable or what, all i need are the rails on the bottom removed from the seat pan

Yeah, I've got those, I'll see if I can get them out this weekend. I don't have a lumbar adjustment though, the only power on the seat is to adjust the height. Do you want the tracks, etc, anyway? I still haven't gotten the airbags out (sorry! I was only home for about 14 hours total this weekend, and I had to pull and box the parts for people who have already paid). How do you disable the SIR system? What is that? Will disconnecting the battery for an hour work?

[gectek]

sir is supplemental inflatable restaint...the air bags...lol. and yah just follow the lines i gave u, disconn batt and remove the connectors at both fuse panels. and yah i just need the track and the motor with it if you can get it in one piece. i have a new lumbar on order, so thats ok on that. just take the plug off the motor and the clips off the bracket and ill take the whole thing. $40 is my offer plus shipping. if you could ship that to me ASAP ill get u the money as soon as i can. i need the motor and rails soon, but the air bags can wait until u get enough time. thanks

[shogun99]

This is one of the better run threads. Each post has a response.
Good job man...this is how you do customer service. Now all i need is that mirror!

[2000alerogx]

For an Update, Whats actually left?

[harvester45]

gectek: Ok, I'll try to have both out this weekend. If I can't, I'll let you know Sunday so you can make other arrangements for the tracks. Sound good?

shogun99: Thanks, I'm trying to keep up with it and my other one at GAOC, it's a little confusing sometimes, but excel is keeping me in line. lol As soon as that clears, I'll be sending it out. It's boxed, labeled, and ready to go. :)

2000alerogx: I updated the list on page two, but I can also post a list of what is spoken for, sold, or damaged beyond salvaging, so that way you can figure that if it isn't listed, it's still up for grabs. That might keep the list shorter, and keep me from forgetting something. I'll try to have that second list by this weekend.

[gectek]

hey never mind about the seat...i have a plan already, im going to hook my elec exhaust cutout to the switch, so i dont need the rails any more. thanks though, but i still want the air bags. so maybe ill save u some trouble.

[howlinwolf]

how about the block, minus heads and all. just pistons and such. and would that work for a normal 3.4 se?

[Jetski29]

just curious if you'd wanna sell your front brake rotors and your wheel hub bearings, if so lemme know how much you'd want for it

later
jason

[harvester45]

gectek: ok, that sounds good. I'll give the airbags another shot Sunday! It's just been kind of hard keeping up with the orders which are paid, and I figure that I should block off about three hours for this, since I don't want to be eatting an airbag. lol

howlinwolf: hey, I can do that, yeah, it would work fine for either a v6 SE or a GT, since the blocks are the same. I couldn't include the oil pan, though. Would that be a problem? (mine is tapped for the turbo oil return line, so I'm gonna include that with the kit whenever I sell it). How would I go about getting this to you? (I live in NW OH)

Jetski29: Yeah, I'm accepting offers for anything on the car. The rotors are the R1 concepts, the calipers are not even a year old remanufatured ones, and the hub bearings opperate normally. If you can give me an offer and how to remove the hub bearings (and a list of what all you want, not sure if you want the calipers, too), I'll have a good idea if it'll be worth it. Thanks!

[gectek]

well u wont have to worry about that, ill get u paid in a few days, and its ok im in no big hurry for them

[harvester45]

gectek: Don't worry about paying me 'till I get them out. I'd rather do that, than be sitting on your money trying to get them out to you. I'll pull em first, that way you can hang onto the $ in case you need it for something else in the meantime.

Thanks,

[james06evoix]

I am interested in the LIM, you have a PM

[harvester45]

I am interested in the LIM, you have a PM

When did you send the PM? I don't think I got it, unless I accidentally forgot to reply to it a few weeks ago, and had to delete it to make more space for new PMs. Let me know.

Thanks,

[bryanw0087]

you have a Right front Hub assembly with the wiring? if so how much you want shipped to 16232

[bryanw0087]

or um i need driverside hub assembly, either one they are able to put on either side

[harvester45]

or um i need driverside hub assembly, either one they are able to put on either side

Yeah, I can do that. I'm not sure how soon, though, since I might have the move the car from it's current location in the near future, and then back again... and I don't want to do that without the wheels on it. lol

[elementdrummer]

ok, so the turbo kit... how much and wat parts are included in it?

[howlinwolf]

i have a messed up lifter i think and i just want to start with a different block. too much crap to mess with. i have everything, just if the block is all together with pistons and stuff? just pm me asap. give me a price and we can start there. still tryin to do stuff but its cool

[harvester45]

elementdrummer: I replied to your PM.

howlinwolf: I sent you a PM.

[5-lO]

PM sent

[harvester45]

PM sent

PM replied to.

[harvester45]

Just an update on what parts are sold (since that'll be easier than saying what is still available). Driver's side doors, glass and mirror are damaged, but other than those parts, everything else on the car is good.


Parts sold so far:

PCM
PCM wiring harness
HVAC Controls
Hazard switch
Driver’s door window switches
Passenger side mirror
42.5 lb/hr injectors
3 gauge pod
Polk 6x9s
Injector Harness
Stock Radio
Airbags and module
Rear disc brake conversion
P&P LIM


Pending sales:
Dash, center consol, A/C ducting, etc.

[harvester45]

Post above edited to reflect sales and items sold pending payment.

Bump.

[El_Diablo]

cant remember if i asked this before or not but what color is your interior? is it in good shape?

also, rear suspension, basically i need the struts and the rear spindle assembly, any idea of how much you would want? i could prolly pick these up depending on where in ohio you are :)

[harvester45]

The interior is grey (the seats and carpet, pillars are tan), and all but the driver's seat is in good condition. I have the cloth interior. I can get the rear assembly for you, I have the drum brakes, though, if that makes a difference. The struts are good, I can pull them in a few weeks, since I need to do some suspension work on my other car anyway.

[frmtheash]

possible to post what you are still willing to sell?

[el nino]

you got any gauges for sale?

[nate2023]

Dibs on Sunroof Motor(if it has one), mine broke/burnt/fried. Price?

[harvester45]

frmtheash: I am willing to sell anything that can be pulled off of the car. The only things that have been sold or aren't recoverable so far are listed in post #147.

el nino: I have a mechanical boost/vac C2 gauge, an electronic boost/vac sport comp gauge, an a/f phantom gauge (a dent in the bezel), a mechanical C2 oil pressure gauge. All of the above are autometer gauges. If you want any of the above, let me know and we'll talk price.

nate2023: I'm sorry, no moon/sunroof motor, let me know if there's anything else you want.

[nate2023]

Did you already sell the fog lamps? if not, price?

[harvester45]

Did you already sell the fog lamps? if not, price?

Fogs are still available. I can do 55 shipped for the fogs, lamps, and brackets.

[El_Diablo]

correct me if im wrong but you have a four door correct? i need all four door panels and switches along with the actual handle assemblies and the ENTIRE dash and dash support bar minus steering wheel and the actual air bags (need the cover panel for the passenger airbags) also need a/c ducting, other parts- center console, b pillar trim, passenger a pillar, possibly the headliner and all that stuff

hmmm, i'll let you know if i think of anything else, can you give me a list of prices? lol, oh and idk where your located in ohio (only place i can think of is parma?) but i might be willing to come pick up the parts to save on shipping if thats alright with you, i could also help pull the parts if you want :)

[harvester45]

Yeah, I have the four door. The two drivers door panels are no good, but the other two are in good shape. I don't have the driver's side door/window switches, but I have the other three, and I can get you all the handle assemblies. I have somebody else interested in the dash, but we haven't talked price yet (so it's still fair game), I don't have the cover for the passenger's airbag, I can get you the air ducting. B-pillars are good (to the best of my knowledge), Passenger a-pillar is good, the headliner is good.

I don't even have an idea for these things, some of it would depend if you could stop out to help tear off (mostly for the dash, etc) a lot of the parts you mentioned are already off, so they won't be a problem. I live in NW Ohio, so that might be a little drive for you, but it would almost definitely cost less than shipping. Let me know.

Harvey

[El_Diablo]

well if i come im comin with a truck!!! lol

i actually need to go to columbus to pick up my rims from my moms house and ive got family in akron so i might head to akron, then up to you and then down to my moms? idk, i need to get a hold of a truck, lol

i really need the center console and dash the most though, followed by the two front door panels, which its already known that you dont have the one

center console, maybe $50? $75 for the dash? $25 for the support? maybe $35 for the A/C ducting?

[harvester45]

well if i come im comin with a truck!!! lol

i actually need to go to columbus to pick up my rims from my moms house and ive got family in akron so i might head to akron, then up to you and then down to my moms? idk, i need to get a hold of a truck, lol

i really need the center console and dash the most though, followed by the two front door panels, which its already known that you dont have the one

center console, maybe $50? $75 for the dash? $25 for the support? maybe $35 for the A/C ducting?

I sent you a PM.

[El_Diablo]

pm replied to and money will be sent ASAP ;)

[harvester45]

pm replied to and money will be sent ASAP ;)

Sounds good. I've updated post #147 to reflect recent sales.

[harvester45]

The P&P LIM is now sold.

Some non-stock parts that are still available:
185* T-Stat
LS6 springs
Leather Shift and e-brake boots
Infinity 4x6 speakers

Complete HP Turbo kit, with all parts (adapters, hoses, fittings, etc.) necessary for a complete and successful installation. (willing to consider any reasonable offer)

Other than that, if it isn't listed in post #147 (on page 8), then it's still for sale. School is almost out for the summer, so I will be able to start selling parts on a regular basis. Feel free to ask any of my buyers about service and communication, or me about any part in which you might be interested.

Thanks for looking,
Harvey

[gectek]

hey have u gotten the harness off the bottom of the seat yet? the one for the up down motor and the motor/actuator?

[harvester45]

hey have u gotten the harness off the bottom of the seat yet? the one for the up down motor and the motor/actuator?

Not yet man. I'm still struggleing to get that out. I'm gonna see if I can just rip the seat out, but it's been giving me a lot of trouble. I'll let you know tomorrow if I get that out.

[gectek]

very cool. let me know.

[grissman]

Im interested in the eibach's...price shipped to 54130?

[harvester45]

Im interested in the eibach's...price shipped to 54130?

You've got PM.

[justinw]

PM sent.

[Bryan]

Passenger front door panel..shipped to 48310? Thanks.

[harvester45]

Passenger front door panel..shipped to 48310? Thanks.

You talking the inside piece or the whole door? For the inside piece, I'd say 45. Shipping might be kinda expensive (usps quoted me at 50+ for the inside piece), but I will be in Toledo a little this summer, maybe we could meet half way and you could just give me 15 for gas? Let me know.

[smooth 1269]

i'm interested in the gt speedo if still available

[harvester45]

i'm interested in the gt speedo if still available

yup, still got it. shoot me a price and we can go from there. I'm too lazy to do the research lol .

[Elderas]

honestly.. I think i might take a bank loan and buy that turbo.

thing is i doubt it will fit on my 2.2 so i wouldnt be buying all the parts.

just the main **** like the intercooler some piping wastegate blow-off

[harvester45]

honestly.. I think i might take a bank loan and buy that turbo.

thing is i doubt it will fit on my 2.2 so i wouldnt be buying all the parts.

just the main **** like the intercooler some piping wastegate blow-off

I'd like to sell this as a kit first, but if that doesn't happen in the next year or so, you're on. lol Seriously though, I think it'd be easier on me to just sell this all together (unless you can find somebody else who has the $ for the other parts you're not buying). I have one or two really interested perspective buyers, so I'll keep everyone posted. Thanks for the interest!

[harvester45]

Passenger front door panel..shipped to 48310? Thanks.

I've got it, I'm at 45879. I've had a lot of requests for shipping quotes, so it's tough for me to pull parts, hang out, and get the quotes. I can talk prices before shipping, though, and we can go from there. Let me know.

Thanks, Harvey

[Bryan]

I've got it, I'm at 45879. I've had a lot of requests for shipping quotes, so it's tough for me to pull parts, hang out, and get the quotes. I can talk prices before shipping, though, and we can go from there. Let me know.

Thanks, Harvey

Meh, scratch that I'll deal with mine. Do you have a lower reverse lamp? PM me if so. :)

[DarkKnight]

There is a bracket that bolts to the passenger side of the trans to the engine. It's bolted directly to the trans around the output shaft with 3 bolts I think. I need that bracket and the bolts. Looking for $15 shipped. Sound good?

[harvester45]

There is a bracket that bolts to the passenger side of the trans to the engine. It's bolted directly to the trans around the output shaft with 3 bolts I think. I need that bracket and the bolts. Looking for $15 shipped. Sound good?

I'll have to check and see how hard it is to get, but if it's not too bad, I could probably do that. Give me a week or so. Thanks!

[Vampyrate]

do you have the dual post mirrors in black? and if so are they power or manual?
if power price +shipping to 24293 and 20176

[harvester45]

do you have the dual post mirrors in black? and if so are they power or manual?
if power price +shipping to 24293 and 20176

Sorry one is sold, the other is destroyed. lol I'll make sure my parts sold list is updated, or maybe I'll even start a new thread, since this one is pretty lengthy.

[harvester45]

The major parts that have been sold:

PCM
PCM wiring harness
HVAC Controls
Hazard switch
Driver’s door window switches
Both Sideview mirrors
42.5 lb/hr injectors
3 gauge pod
Polk 6x9s
Injector Harness
Stock Radio
Airbags and module
Rear disc brake conversion
P&P LIM

Some aftermarket parts still available:

185* T-Stat
LS6 springs
Leather Shift and e-brake boots
Infinity 4x6 speakers

Complete HP Turbo kit, with all parts (adapters, hoses, fittings, etc.) necessary for a complete and successful installation.

Make offers on any available parts still available, no reasonable offer will be refused. My current shipping zip is 45879, for those of you who are looking to get an idea on shipping costs.

Thanks!
Harvey

[abiyng_03GT]

If you have it I would like the glove box door part. $40 shipped???

AIM & Yahoo! : abiyng87

abiyng@gmail.com

Sucks about your car, but glad to hear you are ok

[Elderas]

hey do you by any chance have the rear window switch button panel things.

with or without buttons

[harvester45]

If you have it I would like the glove box door part. $40 shipped???

AIM & Yahoo! : abiyng87

abiyng@gmail.com

Sucks about your car, but glad to hear you are ok

If you just want the door part and the retainer rings (or whatever they are called that hold the door to the rest of the box), I can do that. If not, shipping might be a little extra. Let me know.

[harvester45]

hey do you by any chance have the rear window switch button panel things.

with or without buttons

Yeah, I've still got them with buttons, throw me an offer for both or just one (before shipping), whichever you need. Thanks!

[abiyng_03GT]

If you just want the door part and the retainer rings (or whatever they are called that hold the door to the rest of the box), I can do that. If not, shipping might be a little extra. Let me know.

Yeah, that is the part I need. Let me know, thanks.

[harvester45]

Yeah, that is the part I need. Let me know, thanks.

I sent you a PM with the payment info. Thanks!

[bballr4567]

Ok I got a request. Do you have the piece of plastic that goes from the PCV valve to the back of the UIM?? If you dont know what Im talking about let me know and Ill add a pic.

[96gagtcoupe]

do you still have the 3400 engine??? if so how much if i come and pick it up, also do you have an extra set of heads???? i'm planning on swapping a 3400 or just a 3400 head swap into my 96 gt if the pricing is right.....may need wiring harness and down pipe too.let me know what ya got left and what ya want for it.email me at da_foresaken@netscape.com

[harvester45]

Ok I got a request. Do you have the piece of plastic that goes from the PCV valve to the back of the UIM?? If you dont know what Im talking about let me know and Ill add a pic.

No, man, I'm sorry. I actually cut that up when I put my turbo kit in. I just have the front PCV valve left.

96gagtcoupe: e-mail sent.

[bballr4567]

Ahhh yea its a PITA part to come up on. Part stores do not sell it for some stupid reason. Thanks though.

[Elderas]

heh funny thing is i dont have power windows so the buttons will be useless ;crap

umm i donno how much do they go for? like 20 bucks?

[harvester45]

bballr4567: Sorry I couldn't help! If there's anything else you're looking for, don't hesitate to let me know.

Elderas: Sounds good, I'll send you a PM with the details. Thanks!

abiyng_03GT: I shipped the door today, I'll pm you the delivery confirmation number. Let me know how the install goes!

[bballr4567]

Got the oil dipstick still?? I broke the top off mine!! lol

[harvester45]

Got the oil dipstick still?? I broke the top off mine!! lol

I've got it, but I cut the small piece off that attaches it to the cylinder head. Not sure if you need it, but it wasn't gonna work with my turbo headers, so I just trimmed that part. Let me know if you still want it.

[bballr4567]

No, I just need the dipstick. I broke the yellow think off.

[harvester45]

No, I just need the dipstick. I broke the yellow think off.

I can do that. Let me know what you're looking to pay, I really have no idea on this.

[Ajaxus]

If you just want the door part and the retainer rings (or whatever they are called that hold the door to the rest of the box), I can do that. If not, shipping might be a little extra. Let me know.

I'll take the box part, not the door. :)

PM me price+shipping to 46614

[harvester45]

The parts that have been sold to date:

PCM
PCM wiring harness
HVAC Controls
Hazard switch
Driver’s door window switches
Both Sideview mirrors
42.5 lb/hr injectors
3 gauge pod
Polk 6x9s
Injector Harness
Stock Radio
Airbags and module
Rear disc brake conversion
P&P LIM
Glove box
Engine Oil Dipstick

Some aftermarket parts still available:

185* T-Stat
LS6 springs
Leather Shift and e-brake boots
Infinity 4x6 speakers

Complete HP Turbo kit, with all parts (adapters, hoses, fittings, etc.) necessary for a complete and successful installation.

Make offers on any available parts still available, no reasonable offer will be refused. My current shipping zip is 45879, for those of you who are looking to get an idea on shipping costs.

Thanks!
Harvey

[Kaptain Kirk]

Could you send me some detailed pics of the turbo kit?

kdk1.1@netzero.net

[harvester45]

Could you send me some detailed pics of the turbo kit?

kdk1.1@netzero.net

Pics sent. Let me know if you want more. I'll probably add them to my cardomain in the near future. Thanks!

Harvey

[harvester45]

OK, the car is going to the junkyard within a week and a half. I won't be able to check this thread or ship anything from Sunday till Thursday, but in the meantime if you want to ask for any part that is still on the car, let me know. Please do not PM me, because I won't be able to clear my inbox while I am away. There are many parts already out of the car, but for those that aren't, now is a good time to let me know, before they rest in eternal peace with the rest of the car. The hood, front bumper, rear bumper, trunk, spoiler, etc are all in good condition, as are some of the interior door pieces (pass side). I updated the list on the previous page to be current, so any parts not listed as sold or damaged (driver's side doors, etc) are probably good. Let me know, so I can begin pulling parts before the car is gone. Thanks!

Harvey

[1/2dolla]

Is the power steering pump and pully ok? Not sure yet if I can use it as I have a 2001 GT ,but as I understand it, those parts havent changed in years. I would need the model that has the Non-Variable Effort Steering harness. If not sure there should be a GM service part sticker with the model number somewhere on the sticker..

thx

[harvester45]

Is the power steering pump and pully ok? Not sure yet if I can use it as I have a 2001 GT ,but as I understand it, those parts havent changed in years. I would need the model that has the Non-Variable Effort Steering harness. If not sure there should be a GM service part sticker with the model number somewhere on the sticker..

thx

Yeah, the power steering pump and pulley are in very good shape. check rockauto.com to see if the part number for the 1999 3400 and the 2001 3400 used the same pump. They should be interchangeable, though? Thanks!

[harvester45]

Please make offers on all requested parts. Since I will be away, there is no way for me to give you a price, and I don't want to spend a whole day I could be pulling parts searching for reasonable prices. Highest offer on the turbo kit so far is 2500, make me offers. First one over 2750 (plus paypal fees and shipping) gets it. Thanks!

Harvey

[1/2dolla]

Yeah, the power steering pump and pulley are in very good shape. check rockauto.com to see if the part number for the 1999 3400 and the 2001 3400 used the same pump. They should be interchangeable, though? Thanks!


Well not sure now, Rockauto lists about 10 different parts. but on my unit it has part numbers 26078995ZL and below the bar code is PL03030182 this part number is not listed on their site but some are close.


If you have a sticker on yours its right on reservoir the side facing the pully right below the filler cap... Im not sure the SE models have the variable effort part unless it was an option on your car.. The GT1's has that as standard, so the only way to know is if the part number on yours matches..I guess I will wait to see if you can find it on your unit.

thx again

[bballr4567]

If you have a sticker on yours its right on reservoir the side facing the pully right below the filler cap... Im not sure the SE models have the variable effort part unless it was an option on your car.. The GT1's has that as standard, so the only way to know is if the part number on yours matches..I guess I will wait to see if you can find it on your unit.

thx again

You can run the RPO numbers.

http://groomlakelabs.com/testing/rpo_lookup.php

[1/2dolla]

You can run the RPO numbers.

http://groomlakelabs.com/testing/rpo_lookup.php



Ah very nice... Its the unit with an NV7 designation... there is also a unit with the N40 designation on Rockauto... so I guess we still have to wait to see what Harvester45 has for a part number or designation...thanks again was very helpful

[silvergtjrad]

valve covers $30 shipped

[harvester45]

Ok, I just got back from vacation last night, so I will be pulling all of the parts and shipping them out Monday. I won't be in town for a few weeks, begining on the 12th, so if you want the parts quickly, please be sure to have me paid by Sunday night.

silvergtjrad: I can do 30 shipped on the valve covers, I'll shoot you a PM with payment info.

1/2dolla: I will be looking at that part number later tonight and PM you with the info.



Turbo kit is sold pending payment.

[silvergtjrad]

hey, no longer need the valve covers, i found a set

[rap219]

I'll take the hood. I talked to you about it a few months back. I sent you a PM. LEt me know....Thanks

[harvester45]

Turbo kit is sold!

I have a lot of interior parts (trim, pass side door pannels, headrests, rear deck cover, vents, dash vents etc), tail lights, power steering pump, alternator, UIM, EGR valve, heads, springs, valves, pushrods, lifters, throttle body, and a lot of other misc parts I can't remember right now. Shoot me a PM or e-mail me if you want any of these parts. I'll be starting a new thread in a few weeks once I get all of the parts catalogued. Thanks!

[sudden_impulse]

How much do you want for the reflector from the front passenger side door? Also, how much would you want for the impact bar for the front (considering it's in good shape of course)? Thanks.

[harvester45]

sudden_impulse: Not sure what the front impact bar is, but I definitely have the reflector for the front pass door. How does 6 shipped sound?

[sudden_impulse]

I'll have to see about the reflector, price is good enough. The impact bar is the big black bar behind the bumper cover in front, mine's creased and is affecting the way my bumper cover fits.

[llsht14]

do you have the driver side door reflector?

[Dewitt88]

Driver Side Window Switch (Whole Panel) Passenger Side Switch (Whole Panel) I also need the Radio Bezel and the HVAC Controll unit. PM me a price shipped. Thanks

[lastyear4gt]

If you still have the car do you have the "pewter" (light gray) color roof liner? If so and your passenger side visor has a vanity mirror, how much for that shipped? For shipping info, refer back to the sale of the injectors.

P.S. What kind of condition is the visor in?

[harvester45]

llsht14: yeah, I should have that reflector, let me make sure though. I'll get back to you by the end of the weekend.

Dewitt88: I have the passenger's side switch panel and the Radio bezel. The bezel is painte black. Let me know if that'll work for ya, and then I'll get you prices.

lastyear4gt: I had the tan roof liner (don't have it anymore), and the tan visors with the mirrors ( good condition no lights, though). Let me know if the visor will work.

[lastyear4gt]

Know thanks, I am looking for the gray ones. Thanks anyways.

[Dewitt88]

Yeah I want them

[sudden_impulse]

Have you looked at the impact bar at all?

[harvester45]

Have you looked at the impact bar at all?

Sorry I haven't been able to post in a little bit, I had some surgery that I've been recovering from. The impact bar is with the rest of the car that I sold to the Junk yard. I'm sorry! :(

[harvester45]

Yeah I want them

Ok, give me a few days to get everything located, and I'll try to come up with a price shipped. What's your zip?

[Dewitt88]

32091....



Thanks man..

[bigstribs]

so is anything still available?

[harvester45]

I'm glad you asked... I have quite a bit still for sale. Some of the more noteable parts include the Eibach lowering springs, stock injectors, Infinity Reference 4x6s with silk dome tweeters, cruise control module, Electric Autometer boost gauge, many interior trim pieces and a complete set of heads, hood, front and back bumper covers, and trunk lid. If you want anything and it isn't listed on the first page as being sold, just ask... Sorry I haven't kept this thread updated, I'm doing even more schooling, and its been killing my free time. Since I'm on break and have my first semester under my belt, I will be able to work on this more.

Here's a list of most of the parts that have been sold so far:
The parts that have been sold to date:

Turbo Kit
PCM
PCM wiring harness
HVAC Controls
Hazard switch
Driver’s door window switches
Both Sideview mirrors
42.5 lb/hr injectors
3 gauge pod
Polk 6x9s
Injector Harness
Stock Radio
Airbags and module
Rear disc brake conversion
P&P LIM
Glove box
Engine Oil Dipstick
Both Guage pods

Thanks!

[sly fox]

How much for the passenger side airbag shipped to 39170?

[alerojack]

how much for the header panel shipped to 46016??? if you have the headlights still and are good shape how much for those as well, but more interested in the header panel.

[harvester45]

sly fox: Sorry, I sold both of the airbags.

alerojack: do you mean the headliner/roof thing? I don't have that, but I do have the headlights. They have mild fogging on them, but they can be fixed (see coupe's thread on it). Let me know.

I still have the power steering pump, like new (2k) alternator (stock output), and many interior trim pieces.

[99Alero_Boy]

eibach springs to 80449

[harvester45]

99Alero_Boy: I can do 135 shipped.

[harvester45]

Here is a short list of some of the parts that are still left from my car:

Stock Fog lights (with brackets)
Stock 6x9s and 4x6s (not monsoon)
Stock Speedometer aka gauge cluster (SE, 120 MPH, approx. 75k mi)
GT Speedometer (GT, 150 MPH, approx. 50k mi)
Autometer Sport Comp Electric Boost Gauge: 175 shipped
3400 Cylinder heads with LS6 valve springs - very good condition
Most interior trim pieces
SE Tail lights - very good condition
Passenger side front and rear door panels
Stock voltage alternator – like new condition (<2k mi.)
Radio antenna adaptor (for aftermarket radios)
Glovebox light
Rubber mat from inside the center consol
Spare tire cover and hardware
Floor mats (rear)
Camber adjustment bolts (new, never installed)
Rear deck lid
Armrest (for the center consol)
Power steering pump
Painted radio bezel (black, very few flaws in paint)
Power Driver’s seat height switch
Rear power window switches
Dome light plastic
Infinity Kappa 1” Tweeters
Fuse panel cover (passenger side)
Multi-function switch (turn signal indicators )
Eibach Pro Kit springs - $135 shipped
Front and Rear SE bumpers
Stock Hood and Trunk lid (with stock spoiler on it)

Shoot me offers on anything that you see here.
Let me know if there are any other specific parts that you want.


Here's a link to some pictures of the parts that are left:
http://s264.photobucket.com/albums/ii165/harvester45/

[AleroME]

What color is your door weatherstripping? grey? if so.. do u have all 4?

I tried going to your cardomain site to see your interior color, but its spammed me!

[harvester45]

AleroME: sorry no weatherstripping left, but I do have pics of my interior pieces here:
http://s264.photobucket.com/albums/ii165/harvester45/

[Trigga-T]

where in ohio do you live? wuts p-town is that parma?

[harvester45]

where in ohio do you live? wuts p-town is that parma?

Haha, no I'm in NW Ohio, and Toledo is the closest I get to Cleveland. If you're looking for pickup, I can go to Toledo, or a little closer if you want a lot of stuff. Let me know.

[Trigga-T]

theres nothin really i need. i was just wondering where you stay at. i need 2 door parts.

[Dave C]

its been a while, but sorry to hear about the car... I was just wondering if you still have any of the HVAC knobs left?

[harvester45]

its been a while, but sorry to hear about the car... I was just wondering if you still have any of the HVAC knobs left?

Thanks, I was pretty sorry when it happened, too. But I got a chance to upgrade and I walked away from the accident, so I can't complain.

Sorry though, I believe that the HVAC knobs are already sold.

[silvergtjrad]

Who ended up buying the turbo kit?

[harvester45]

silvergtjrad: I believe he was a member from here, but I'll keep his identity confidential (and I can't remember it off the top of my head anyway) and let him speak up if/when he wants to. I believe that he is close to finishing the install, due to the nature of the support e-mails he has been sending.

BTW, Springs are SOLD pending payment.

[harvester45]

Springs are NOT sold... buyer is AWOL.

I will be starting a new thread, since this one has reached epic and unmanageable porportions. lol

New thread here:
http://www.grandamgt.com/forum/showthread.php?p=950477