Just another GAGT

[silvergtjrad]

I just got my rear windows tinted today and decided to post up some pics of the GA.

http://www.fquick.com/images/vehicles/full/470529585.jpg (http://www.fquick.com/garages/viewgallery.php?action=viewimg&id=29585)
Limo tint on rear doors and rear windshield
http://www.fquick.com/images/vehicles/full/470523922.jpg (http://www.fquick.com/garages/viewgallery.php?action=viewimg&id=23922)
gauges
http://www.fquick.com/images/vehicles/full/470527219.jpg (http://www.fquick.com/garages/viewgallery.php?action=viewimg&id=27219)
After a car wash on a "warm" day
http://www.fquick.com/images/vehicles/full/470529579.jpg (http://www.fquick.com/garages/viewgallery.php?action=viewimg&id=29579)
S&S and custom cold air box
http://www.fquick.com/images/vehicles/full/470529581.jpg (http://www.fquick.com/garages/viewgallery.php?action=viewimg&id=29581)
we have two pontiacs at my house ;)
http://www.fquick.com/images/vehicles/full/470529582.jpg (http://www.fquick.com/garages/viewgallery.php?action=viewimg&id=29582)
3500 heads I got in the mail today

[Exodus]

Nice. I like the custom air box.

[boost21]

car looks good. any more pix of the air box? looks kinda neat

[silvergtjrad]

car looks good. any more pix of the air box? looks kinda neat
When i get the chance I'll take it apart and take more pics of it. The side thats closest to the engine is part of the Dr.Speed cold air box, I just cut and bent up the top piece and screwed the two pieces together.

[laxjax13]

How hard was the header install and did u do it at home?

im thinking about getting a set for summer.

[ancona46]

how was it mounting that gauge pod?

i just bought one and all it came with was 2 screws and no instructions

[silvergtjrad]

How hard was the header install and did u do it at home?
It wasnt that hard but it took a loooong time to get done. The two worst parts were getting the damn shield off of the stock crossover and getting the rear header squeezed behind the engine. The rest is just kind of awkward to work on. Id reccomend having an impact for the downpipe bolts, 02 sensor socket, a couple wobble extensions, swivel head ratchet, and swivel sockets or adaptor. With those tools everything should be a piece of cake, but it still takes some time.

how was it mounting that gauge pod?
It was very easy. Remove the stock pillar cover, mark and predrill holes in the A pillar, wire gauges and screw it in. Viola, done.

[bballr4567]

Damn that looks hot man. Love the new heads. When is the surgery happening??

What type of headers are those?? S&S or TOG???


BTW the GA still looks hotter.

[silvergtjrad]

What type of headers are those?? S&S or TOG???
Theyre S&S Headers. Im not gonna put the 3500 top end on for a little while still, Ive gotta save up a little bit of moeny. In the past month I bought the headers w/downpipe, 3500 top end, and tint today so that was a pretty good dent in my wallet. Before they get put on Im going to send the heads over to ben at 60*V6 to get cleaned up and get some ported manifolds as well.

[silvergtjrad]

alright, finally got off of my arse this morning and took a couple pics of the airbox

http://www.fquick.com/images/vehicles/full/470530025.jpg (http://www.fquick.com/garages/viewgallery.php?action=viewimg&id=30025)
Here is a closer, vertical pic. I need to come up with a way to seal it better on the back side. There is roughly a 1/2" gap on the back that is open and a little bit on the side against the fender.
http://www.fquick.com/images/vehicles/full/470530026.jpg (http://www.fquick.com/garages/viewgallery.php?action=viewimg&id=30026)
This is the top of the box, the bent piece runs along the washer fluid bottle down to the hole in the fenderwell.
http://www.fquick.com/images/vehicles/full/470530027.jpg (http://www.fquick.com/garages/viewgallery.php?action=viewimg&id=30027)
The top screws into the Dr speed piece(black)

I put up a few new pics on my fquick too btw

[BlackAttackGA]

Very nice looking car!