"MPR" Modified PCM Group Buy (V6 only)

[lvemy3100]

We are having a group buy on modified PCMs....

info about these PCM's can be found at the following link http://www.mpracing.org/store/index.php?act=viewProd&productId=92

for info about the Group Buy please go to the following link http://mpracing.org/forum/index.php?topic=32.msg196#msg196


GB List:

1. "Gileyson" (Chris) deposit paid
2. "njmalibuman" (Justin) deposit paid
3. "Sikmindz" deposit paid
4.
5.
6.
7.
8.
9.
10.

[Gizm0815]

great deal for anyone whos looking to get a aftermarket pcm. i got 3 tenths off my 1/4mile with just a tune, no supporting mods and i was in need of a tune up.

[SikMindz]

Any core charges or will you be sending a brand "new" unit after it has been modified on your end?

And we'd still need a case learn correct?

[lvemy3100]

Any core charges or will you be sending a brand "new" unit after it has been modified on your end?

And we'd still need a case learn correct?

there are no core charges as the cost of the new/used PCM is included in the cost.

Yes we advise having a CASE learn done after the installation of your new PCM... no matter where you get one from...

[SikMindz]

Thanks for the info. Definitely on my to-do list if I don't get rid of the GA anytime soon.

End date for the GB?

[lvemy3100]

Thanks for the info. Definitely on my to-do list if I don't get rid of the GA anytime soon.

End date for the GB?

the GB end date will be determined by the initial 2-5 people we get as once there are at least 2 who want in there will be one week wait for additional people to join... after that week wait the people who paid their good faith deposit will be left to decide how much longer we wait for others to join.. majority vote wins

voting will be done @ www.mpracing.org/forum in a thread that has yet to be made....

[DrFabulous]

V6 :scream:

[lvemy3100]

V6 :scream:

no worries... we will have a 4cyl PCM GB when we have the ability to do so... (hopefully by end of spriing)

[DrFabulous]

no worries... we will have a 4cyl PCM GB when we have the ability to do so... (hopefully by end of spriing)

Oh goody!!! I am 100% IN for that. Let me know they second it's available, I shall buy one immediately.

[zhd1000]

http://www.mpracing.org/store/index.php?act=viewProd&productId=92

is this the service being offered in the group buy?? if so i may be interested depending on the number of people..

[lone_wolf025]

http://www.mpracing.org/store/index.php?act=viewProd&productId=92

is this the service being offered in the group buy?? if so i may be interested depending on the number of people..

If you haven't been tuned yet I HIGHLY recommend going with this. He's the guy who tuned my car.

[lvemy3100]

http://www.mpracing.org/store/index.php?act=viewProd&productId=92

is this the service being offered in the group buy?? if so i may be interested depending on the number of people..

yes that is the service/product that we are having the GB for...

BTW- I replied to your PM

[cobrajeff92]

you can put me down for one if you can tell me any other info ill start off ill send paypal also or what ever else i need.

[lvemy3100]

you can put me down for one if you can tell me any other info ill start off ill send paypal also or what ever else i need.

I am not sure what you mean by "if you can tell me any more info i'll start off.."

but if you mean that you are willing to be in on the group buy then please check the following link for the info I require and where to send such

info about these PCM's can be found at the following link http://www.mpracing.org/store/index.php?act=viewProd&productId=92

if you want the GB discount DO NOT place your order via our store.. instead send $25 (good faith deposit) to mprstore@mpracing.org... follow all other directions on the store page and put "MPR PCM GB" in the subject of the email containing the info required... after that your name will be put on the list along with any others who have made their deposits and we will go from there



for more info about the Group Buy please go to the following link http://mpracing.org/forum/index.php?topic=32.msg196#msg196

[zhd1000]

ok well, not sure if i can do this just yet, maybe when it hits the 6-10 range but if you get 10 i will for sure be #11 :D

make sure to let me/us know how much time we have, i'm sure you'll get 2 people fairly quickly

[gileyson]

Mark.
It's Chris in Ottawa I ordered that CAI from you recently, I want to get in on this GB offer so i just send you the $25 deposit thru paypal and what directions are you refering to on the store page as you said NOT to place our order via the store?

Any help would be appreciated because I am definately ordering on this GB !!

On another note I presently don't have my catback exhaust done but will this summer or next spring but have CAI, FFP pulley what do I have to request on the tune to get an equivalent tune to what the DHP like PFYC offer ?

BTW that CAI fit like a charm with all those pieces you sent me, great customer service for those that don't know mpracing.

Chris

[lvemy3100]

Mark.
It's Chris in Ottawa I ordered that CAI from you recently, I want to get in on this GB offer so i just send you the $25 deposit thru paypal and what directions are you refering to on the store page as you said NOT to place our order via the store?

Any help would be appreciated because I am definately ordering on this GB !!

On another note I presently don't have my catback exhaust done but will this summer or next spring but have CAI, FFP pulley what do I have to request on the tune to get an equivalent tune to what the DHP like PFYC offer ?

BTW that CAI fit like a charm with all those pieces you sent me, great customer service for those that don't know mpracing.

Chris

yes for the GB you send the deposit of $25 thru paypal to mprstore@mpracing.org

as for the directons... they are on the store page... I only meant not to pay for your PCM via the store unless you dont want in on the GB...

as for the rest I have sent you a PM....




I strongly suggest that anyone who is interested in this to please go to the following link for info about the Group Buy http://mpracing.org/forum/index.php?topic=32.msg196#msg196

[SpyhunteR]

V6 :scream:

just get HPTuners, and start tweaking.

[gileyson]

Come on guys this is a great deal just pony up, unless you've got time on your hands like spyhunter !!!
j/k I'm too lazy and too busy to try tuning myself !!

Chris

[SikMindz]

But the $$$ factor...that's like, uhh. A round of drinks for me!?! lol

I'm like 75% sure I'm in. Need to pay some stuff off this week and voila. Mark- when's the quickest these could get to us by?

[geldartb]

id be down for it if i could get a pretty good tune for the few mods i have
2.5 from the manifold back
cold air intake with 65mm tbody and ported uim
22lb injectors with the 55psi fuel pressure.
180 tstat
im currently using 93

although id like to see how many people come forward for this.

another question is this tune locked down in the pcm or can i come back with dhp at a later date and tune it myself once i get more modding doen.

[lvemy3100]

But the $$$ factor...that's like, uhh. A round of drinks for me!?! lol

I'm like 75% sure I'm in. Need to pay some stuff off this week and voila. Mark- when's the quickest these could get to us by?

well that depends on how many I have to do and how quickly I can get PCM's that match each service # of each PCM I need to tune.. also depends on how quickly each persons payment clears and how long those who pay their deposits are willing to hold out in hopes of getting more people in to get a better deal inthe end... typical turn around is 1-10 days but since I should have all of everyones info prior to recieving final payments I would think that it should be no longer than 5 days after payment has cleared...


if you only meant how long will shipping take.. that is up to USPS or UPS depending on how each person wishes to have theirs sent...

[lvemy3100]

id be down for it if i could get a pretty good tune for the few mods i have
2.5 from the manifold back
cold air intake with 65mm tbody and ported uim
22lb injectors with the 55psi fuel pressure.
180 tstat
im currently using 93

although id like to see how many people come forward for this.

another question is this tune locked down in the pcm or can i come back with dhp at a later date and tune it myself once i get more modding doen.

PM sent

[gileyson]

Sikmindz I understand how important a round of drinks is, I'm celebrating my Sens over the Pens as we speak!!

That's hockey BTW!!! i AM cANADIAN!!!!!

[DrFabulous]

just get HPTuners, and start tweaking.

I don't make mad powa foolio. We're not all superfly like you!

[lvemy3100]

bump...


GB List:

1. "Gileyson" (Chris) deposit paid
2.
3.
4.
5.
6.
7.
8.
9.
10.

[mr_eh]

i've never seen people squirm so much to put 100$ up for a part for a car

[gileyson]

Thanks Mr.eh I thought it was just me!!!

Chris

[gileyson]

SO how many have ordered from here so far????

[lvemy3100]

bump....

figured with all the people asking before that there would be alot more interest in this GB...

Guess there isnt since I only have one deposit paid for so far....

[gileyson]

What is up with you people, a group buy is offered after initial interest in a PCM tune and now that it's up the only participant is me some lowly Canuck!!!!!

This is as bad as the sway bar GB I'm trying to organize, I'm not rich by any means but these buys save us all some funds and yet you all ***** out when it comes time to pony up. I heard you were all yammering for someone to step up and offer a deal for this and when it's offered you all run an hide.

You should all be embarassed, what is up with you guys??? At least us Canucks can recognize a good deal and step up. Weak!!!!!

[lvemy3100]

bump

[GodsendGAGT]

Well if the group buy is still good in a week or two then i should be able to get in

[lvemy3100]

GB List:
1. "Gileyson" (Chris) deposit paid
2. "njmalibuman" (Justin) deposit paid
3.
4.
5.
6.
7.
8.
9.
10.

[zhd1000]

so how long do we have to get in now?

[SikMindz]

What is up with you people, a group buy is offered after initial interest in a PCM tune and now that it's up the only participant is me some lowly Canuck!!!!!

This is as bad as the sway bar GB I'm trying to organize, I'm not rich by any means but these buys save us all some funds and yet you all ***** out when it comes time to pony up. I heard you were all yammering for someone to step up and offer a deal for this and when it's offered you all run an hide.

You should all be embarassed, what is up with you guys??? At least us Canucks can recognize a good deal and step up. Weak!!!!!

Calm down Canuck. Jeez...

Money sent. I'm too lazy to search- where do I get the PCM Service # from and how do I pull the PCM out to look at it?

[Ajaxus]

holy crap son (fyi i live close enough that i can get it tuned in person..hence why <---------this guy isn't on the gb)

[lvemy3100]

Calm down Canuck. Jeez...

Money sent. I'm too lazy to search- where do I get the PCM Service # from and how do I pull the PCM out to look at it?

info here -> http://mpracing.org/forum/index.php?topic=32.15;p=21


GB List:

1. "Gileyson" (Chris) deposit paid
2. "njmalibuman" (Justin) deposit paid
3. "Sikmindz" deposit paid
4.
5.
6.
7.
8.
9.
10.

[gileyson]

Calm down Canuck. Jeez...

Money sent. I'm too lazy to search- where do I get the PCM Service # from and how do I pull the PCM out to look at it?

:attention

Sikmindz.
It got you guys moving didn't it, LOL!!!!!!

:applause:

[SikMindz]

Not really. Paycheck got me moving. lol

[lvemy3100]

so how long are you both willing to wait to let others get in on this?

[SikMindz]

AFAIC, I want it noooow! lol

The sooner the better!

[lvemy3100]

well the shortest time I am willing to wait is May 7th (Monday) and the longest is May 21st.. at which time the remainder of the payment would be due...

so based on this and what Sik is voting it looks like 1 vote for May 7th

[SikMindz]

well the shortest time I am willing to wait is April 7th (Monday) and the longest is Apr 21st.. at which time the remainder of the payment would be due...

so based on this and what Sik is voting it looks like 1 vote for Apr 7th


Damn! A whole year!?! That's crazy! Who are you...APOC!?!???

lol

May 7th and May 21st you meant I think. I vote May 5th which is Saturday.

[lvemy3100]

Damn! A whole year!?! That's crazy! Who are you...APOC!?!???

lol

May 7th and May 21st you meant I think. I vote May 5th which is Saturday.


Damn that was pretty bad... no clue what made me do that ;crap



you would try to vote for sat... lol..

[SikMindz]

Cinco de Mayo = bar night = -$$$ = due date

DUH!

[lvemy3100]

GB List:

1. "Gileyson" (Chris) deposit paid
2. "njmalibuman" (Justin) deposit paid
3. "Sikmindz" Deposit paid
4. "Mbear" (Matt) Deposit NOT paid
5. "GCGuy2169" (Tim) Deposit Paid
6.
7.
8.
9.
10.

[lvemy3100]

deadline for deposits is now set for 12:01am Monday May 7th

[lvemy3100]

GB List:
1. "Gileyson" (Chris) deposit paid
2. "njmalibuman" (Justin) deposit paid
3. "Sikmindz" Deposit paid
4. "Mbear" (Matt) Deposit NOT paid
5. "GCGuy2169" (Tim) Deposit Paid
6. "Brad M" (Brad) Deposit Paid
7.
8.
9.
10.

Everyone please remember to send me the required info ASAP so that all orders will ship in a timely manner once final payments have cleared....

[gileyson]

Mark I told a few groups May 11th, any big deal to wait till then?

They may come onboard and the more the merrier!!

Cheaper too!! LOL

[SikMindz]

Nooooooooooooooooooo.

[lvemy3100]

Mark I told a few groups May 11th, any big deal to wait till then?

They may come onboard and the more the merrier!!

Cheaper too!! LOL

we already have 6 people and I have already set a deadline so it is kind of a big deal... sorry

[Vampyrate]

if it werent for the fact that i have too many bills ! damn!

[gileyson]

Sorry I thought the first two people had some say in this, guess not?
Thanks for the consult.

[gileyson]

Sorry Mark did you not say it was up to the first two people who ordered as to the deadline, of which I am ONE?

[lvemy3100]

Sorry Mark did you not say it was up to the first two people who ordered as to the deadline, of which I am ONE?

you are correct I did say this but I was also asked by many to give a deadline and no one spoke up as to when I asked on the 1st how long you 2 were willing to wait... the only person to speak up in 2 days was sik so i took it as a sign that you either did not care or agreed with him... I am sorry for this...


So I will now do this... if you havent already paid your deposit and want in on this GB and REALLY need until the 11th email me at pcmtuning@mpracing.org and if I receive 2 requests before the 7th I will extend the deadline to the 11th...

I hope this helps...

[gileyson]

you are correct I did say this but I was also asked by many to give a deadline and no one spoke up as to when I asked on the 1st how long you 2 were willing to wait... the only person to speak up in 2 days was sik so i took it as a sign that you either did not care or agreed with him... I am sorry for this...


So I will now do this... if you havent already paid your deposit and want in on this GB and REALLY need until the 11th email me at pcmtuning@mpracing.org and if I receive 2 requests before the 7th I will extend the deadline to the 11th...

I hope this helps...

My mistake I didn't realize you were asking us to decide then, I figured we would be emailed and asked to decide at a later date. I also emailed you and said I was in no rush a while ago after I was the only one to send in a deposit and nobody was responding and was more than willing to wait so some more people could come forward, if the deadline is May 7th that's fine I didn't realize there was a rush?

[lvemy3100]

GB List:
1. "Gileyson" (Chris) deposit paid
2. "njmalibuman" (Justin) deposit paid
3. "Sikmindz" Deposit paid
4. "Mbear" (Matt) Deposit Paid
5. "GCGuy2169" (Tim) Deposit Paid
6. "Brad M" (Brad) Deposit Paid
7. "zhd1000" (Zack) Deposit Paid
8.
9.
10.
Everyone please remember to send me the required info ASAP so that all orders will ship in a timely manner once payments have cleared....

[SikMindz]

Info sent. Do you think you can do a how with pics on how to remove the PCM and whatnot?

Yes I'm an idiot and it took me like 20 minutes to find the serv. no. I couldn't figure out how to slide the damn thing out- then I realized, "Oh..I wonder what this plastic lever does if I slide it out of the way?'

Duh.

In the instructions in the link earlier it said to loosen a bolt. I didn't see a bolt nor did I have to loosen anything to slide the PCM out far enough to see the serv. no. Am I missing something? For me it was as simple as pushing a lever outward.

[SikMindz]

Also, what does the ES Kit v1.2 entail? I was reading up on DHP's tuned PCM and was wondering if your tune was about the same.

FEATURES:

Speed limiter removed
3-1 and 4-2 skip shifts
Transmission line pressure increased
Shift points moved (5800-6000rpms)
Fan turn on points altered as follows:
186 degree F Turn On
Fuel/spark adjustments as follows:
Enrichens fuel delivery for critical problem areas
Provides a consistent power gain across the entire power band
Reduces spark retard (knock retard)

[lvemy3100]

Info sent. Do you think you can do a how with pics on how to remove the PCM and whatnot?

Yes I'm an idiot and it took me like 20 minutes to find the serv. no. I couldn't figure out how to slide the damn thing out- then I realized, "Oh..I wonder what this plastic lever does if I slide it out of the way?'

Duh.

In the instructions in the link earlier it said to loosen a bolt. I didn't see a bolt nor did I have to loosen anything to slide the PCM out far enough to see the serv. no. Am I missing something? For me it was as simple as pushing a lever outward.

Sorry about that... a How-to will be provided with all PCMs...

as for having to loosen a bolt.. that has to do with when you actually try to pull the wire connectors as they are bolted to the PCM....



Also, what does the ES Kit v1.2 entail? I was reading up on DHP's tuned PCM and was wondering if your tune was about the same.


ES Kit stands for "electronic shift kit"... the version # corresponds to the version of settings implemented... v1.2 is standard and all newer versions are specific to set driving types/mods/vehicles... we do not sell Boxed PCMs and so there is no way to receive this service alone unless you are local or are willing to bring your vehicle to us...

DHP sells a boxed PCM that requires you to have certain mods prior to the install of their PCM and ours are custom to the vehicle in question...

one thing that we for sure do not feature on our PCMs is "skip-shifts"... fact is we dont quite know how DHP does it and frankly dont care to know as I dont think that our transmissions (in stock form) can handle the abuse dished out by "skip-shifts"

[SikMindz]

Ok..but are the features such as skip shifting, trans press. increase, higher shift points and fuel/spark adjustments included or could they be?

[lvemy3100]

Ok..but are the features such as skip shifting, trans press. increase, higher shift points and fuel/spark adjustments included or could they be?

fuel and spark tables are changed based on mods or lack thereof... shift points are adjusted to take advantage of mods and powerband of the vehicle... as part of the ES-kit service that is included with all PCMs the line pressure is increased as well as comanded shift time decreased and quite a few other things...

[lvemy3100]

GB List:

1. "Gileyson" (Chris) deposit paid
2. "njmalibuman" (Justin) deposit paid
3. "Sikmindz" (Darren) Deposit paid
4. "Mbear" (Matt) Deposit Paid
5. "GCGuy2169" (Tim) Deposit Paid
6. "Brad M" (Brad) Deposit Paid
7. "zhd1000" (Zack) Deposit Paid
8. "03alerospl" (Mark) Deposit Paid but Uncleared
9.
10.

Everyone please remember to send me the required info ASAP so that all orders will ship in a timely manner once payments have cleared....

[SikMindz]

#8 is 03alerospl

I posted up on Aleromod for you.

http://www.aleromod.com/forums/showthread.php?t=17694

fuel and spark tables are changed based on mods or lack thereof... shift points are adjusted to take advantage of mods and powerband of the vehicle... as part of the ES-kit service that is included with all PCMs the line pressure is increased as well as comanded shift time decreased and quite a few other things...

Got it! If anything I'd love to gain some fuel mileage out of this..don't know if that's even possible but geez...$3.61 a gallon for 87 is not cool! lol

[lvemy3100]

thanks...


all fixed

[SikMindz]

Looks like another 1-3 are adding from A-Mod.

[Ajaxus]

you know i might do this and then we can follow up later since i live close enough if i feel like getting some of it tweaked..but i do have a question.

i have a Pro-M Maf installed right now, would you be able to tune for this or do you think it would be better if I just waited and we did this in person so you can see how the Pro-M Maf affects the tune and car?

[SikMindz]

I hope so. Mark knows that I have a Pro-M MAF too.

[lvemy3100]

you know i might do this and then we can follow up later since i live close enough if i feel like getting some of it tweaked..but i do have a question.

i have a Pro-M Maf installed right now, would you be able to tune for this or do you think it would be better if I just waited and we did this in person so you can see how the Pro-M Maf affects the tune and car?

I have modded 3 PCMs so far that were installed on cars with Pro-M's and 2 of owners (for whatever reasons) did not tell me that they were installed.. based on scanning there was not enough of a diff to warrant any changes being made to the PCM to compensate for its installation...

...you would just be better off leaving a stock MAF AND Screen in place as there is no way that 99% of the N/A cars are outflowing their MAfs and the screen actually allows the sensor to give more consistent and accurate readings to the PCM resulting in more consistent power and a safer motor...

AJ- as for tuning your car.. I woud just wait till we meet up so I can just dial it in as I always start from stock anyways so all changes made would be tossed and then I would dial in the car based on it current condition and mods...

[lvemy3100]

GB List:

1. "Gileyson" (Chris) deposit paid
2. "njmalibuman" (Justin) deposit paid
3. "Sikmindz" (Darren) Deposit paid
4. "Mbear" (Matt) Deposit Paid (possible back out)
5. "GCGuy2169" (Tim) Deposit Paid
6. "Brad M" (Brad) Deposit Paid
7. "zhd1000" (Zack) Deposit Paid
8. "03alerospl" (Mark) Deposit Paid but Uncleared
9. "Satsuriku" (Robert) Deposit paid
10.

Everyone please remember to send me the required info ASAP so that all orders will ship in a timely manner once payments have cleared....Robert

[mzrmatt]

so is tomorrow the last day to get in on the group buy, i know there was some confusion on that???

[SikMindz]

I have modded 3 PCMs so far that were installed on cars with Pro-M's and 2 of owners (for whatever reasons) did not tell me that they were installed.. based on scanning there was not enough of a diff to warrant any changes being made to the PCM to compensate for its installation...

...you would just be better off leaving a stock MAF AND Screen in place as there is no way that 99% of the N/A cars are outflowing their MAfs and the screen actually allows the sensor to give more consistent and accurate readings to the PCM resulting in more consistent power and a safer motor...

AJ- as for tuning your car.. I woud just wait till we meet up so I can just dial it in as I always start from stock anyways so all changes made would be tossed and then I would dial in the car based on it current condition and mods...


I don't have a stock MAF. Boo. Think I'll be ok?

[lvemy3100]

deadline for deposits is now set for 12:01am Monday May 7th

... at one point we requested those who needed more time to contact us via email and if we received 2 or more requests we would extend the wait... we received no requests at all so this GB is officially over....

those who have paid their deposits must pay the remaining cost ($65) ASAP as well as providing me with your car/PCM info so that I may get to work on such.. the sooner you send in your final payments and provide me with the required info the sooner you will receive your PCM...

[lvemy3100]

I don't have a stock MAF. Boo. Think I'll be ok?

you will be fine... no worries....

[SikMindz]

... at one point we requested those who needed more time to contact us via email and if we received 2 or more requests we would extend the wait... we received no requests at all so this GB is officially over....

those who have paid their deposits must pay the remaining cost ($65) ASAP as well as providing me with your car/PCM info so that I may get to work on such.. the sooner you send in your final payments and provide me with the required info the sooner you will receive your PCM...

I had mentioned that to people but apparently no one listens. Oh well- $90 is cool with me. Payment sent!

[Brad M]

Just sent my payment as well, thanks!