2.4 stuff, 2.3 stuff, 75mm t/b, msd blaster

[SpyhunteR]

I have for sale a number of things... here they are with links to photos w/ prices. Everything has a corresponding box waiting for it to go to you.

MSD Blaster Vibration Coil
http://www.flickr.com/photos/vegas_rob/491860139/
http://www.flickr.com/photos/vegas_rob/491860139/

2.4L/2.3L IDI Coil housing
http://www.flickr.com/photos/vegas_rob/491843448/
http://www.flickr.com/photos/vegas_rob/491859961/

I have 1 2.3 HIGH OUTPUT IDI cover left. They all are cleaned up before you receive.
http://www.flickr.com/photos/vegas_rob/491859135/


I also have available but no pictures of.

the long vent at the front of your dash by the windshield

SE coupe front bumper

SE coupe side skirts (2 door model) one white one dark grey

a Glove Box for a 99+ N-body

OEM SE 99+ N-body springs 12000miles

OEM SE 99+ N-body Struts 45000miles


I am reachable via AIM: MONKthe1 or though PM's or through my viewing of this thread. Any questions yell at me.

[ihatemygrandamg]

How much for one ho idi cover?

[SpyhunteR]

How much for one ho idi cover?

In the link underneath the photo is says $55 shipped, I should have been slightly more specific. I've collected them over the years.

[SpyhunteR]

this is how much they're going on ebay.

http://cgi.ebay.com/ebaymotors/Quad-4-High-Output-Valve-Cover-2-3-DOHC-Engine-Cover_W0QQitemZ320110272197QQihZ011QQcategoryZ3362 7QQrdZ1QQcmdZViewItem

[SpyhunteR]

2.4L throttle body and 2.3L to 2.4L intake manifold is sold.

[ganut]

I'll take an idi cover. Do it for 50 shipped.

and an intake manifold flange ;)

[SpyhunteR]

I'll take an idi cover. Do it for 50 shipped.

and an intake manifold flange ;)

I'll have your information tomorrow..

[SpyhunteR]

1 IDI sold

[ganut]

;)

[SpyhunteR]

75mm is bye bye.

[SikMindz]

http://www.grandamgt.com/forum/showthread.php?t=68496

Cleaned up thread.

[AeR0]

2.4L LD9 exhaust manifold. NO EGR provision available on this. outlet has been ported to about 2.5inches


how many inches is it stock?

[SpyhunteR]

2.4L LD9 exhaust manifold. NO EGR provision available on this. outlet has been ported to about 2.5inches


how many inches is it stock?

a lil smaller than 2.25inches.. At least on mine it was like that.

[ganut]

I can measure the one in my closet if you wanna know that badly. ;)

[AeR0]

so would i need to change my exhaust piping too?

[SpyhunteR]

so would i need to change my exhaust piping too?

it's just a stock piece that has had the exhaust ports mildly opened up, and the collector ported out to 2.5inches........ it'll bolt up to the stock stuff just fine..

Did i ever use it after i modified it? no, it was just something to do while i was bored at home. It's been a part laying around for a few years. The only thing I can recommend is to get everything after the exhaust manifold back in 2.5inch ..............................

[ganut]

Got the IDI cover today. Started polishing it up about a minute after I opened it.

Thanks Spy.

[smooth 1269]

I'll be in Vegas next weekend Rob, maybe I can pick up one of those IDI covers from ya ;)

[SpyhunteR]

I'll be in Vegas next weekend Rob, maybe I can pick up one of those IDI covers from ya ;)

SOLD..

[AeR0]

is the 2.4L LD9 exhaust manifold and if not how many kms on it? and how much dou want for it shipped to brantford ontario n3t 3n7?

[SpyhunteR]

exhaust manifold sold.