Help with evap hose [Archive] - GrandAmGT.com Forum

PDA

View Full Version : Help with evap hose


gobraves00
05-29-2007, 12:32 PM
the hose shown in the pics is the same hose for all 4 pics.after completing my engin work i backed the car out and found this on the floor. i have no clue where it goes. i hear a utering sound beneath the coil packs. i am getting a check engine, po420, which is referring to evap leak. the hose is approx 12 inches in length and has 2 bends in it.it has a 3 inch rubber hose on 1 end and a 2 inch rubber hose on the other also this rubber end has a bigger opening than the other side.any help would be greatly appreciated

gobraves00
05-29-2007, 12:38 PM
pics

gobraves00
05-29-2007, 12:39 PM
that and 1 screw are my remaining parts

gobraves00
05-29-2007, 12:53 PM
sorry, its a 97 3.1

gobraves00
05-30-2007, 12:25 AM
bump, come on sum1 has to know where this goes

gobraves00
06-13-2007, 01:14 AM
well i thought i fixed everything, i went to get emissions and passed everything.cars been in garage for a week, go and pull it out and drive about 5 miles and the dang check engine light came back on. ill go and pull the code tomo. im so tired of this shiot, i just want it to run,ahhhhhhhhhhhhh