07-15-2007, 12:01 PM
So the other day my car wouldnt start. So i did the basic things. I replaced the starter, starter relay. I checked all the feul. Then i found out that the pcm fuse was blown. So i changed that, then did the sec. relearn. The car started but then i heard a pop, and it smelled like wired were melting. So i found out that there is a short somewhere. I checked the starter wire form the batter cable, and the cable from the batt to the ecm. The cable is ok, so i narrowed it down to the ecm. Has any one else had a problem with this, and how do i take out the ecm so i can go through it and see if i can find the short.