Bolt Pattern/ Offset [Archive] - GrandAmGT.com Forum

PDA

View Full Version : Bolt Pattern/ Offset


Monello
01-02-2003, 01:55 AM
Hey guys, i was looking for some rims and came across some good looking rims. They are 17X8 5 LUG PATTERN ++23 OFFSET. 5X4.5 BOLT PATTERN. Will these fit good? Are they too wide? Let me know, thanks

Irate
01-02-2003, 07:16 AM
The offset seems a little too low. You usually want to stay around 34-38... the width is fine, I have the same width w/ 18's = no rubbing. 5x4.5" is basically 5x114.3mm, which should also fit so long as you get a centering ring. Ask the place where you want to buy the rims from about it, or try a search on the forums here.

You can also check the Rim Database (http://www.grandamgt.com/forum/showthread.php?s=&threadid=2325&highlight=pattern+offset)

EBlend
01-02-2003, 07:38 AM
yah 4.5 is good pattter, i run it on my ride, just get hubcentric rings to make sure the rim sits dead center on the wheel and you are all set