Plug question - short question short answer! [Archive] - GrandAmGT.com Forum

PDA

View Full Version : Plug question - short question short answer!


redhotalero
11-01-2007, 11:58 PM
Can't seem to find double platinum plugs from AC Delco - can you find then anymore? I was told that doubles are OEM on the 3.4L.... Best bet after that is what? I've found some Champions, Autolite, and NKGs, is there are "best" plug?

stewartfn18
11-02-2007, 06:18 AM
i personally would go with NGK iridium. that is what im running in my car and i think they're great.

cardude007617
11-02-2007, 08:47 AM
eh i just have the tr55s (i think) they are the $1.88 a piece spark plugs at like autozone and stuff, seem pretty good over like 2000 miles so far

nate2023
11-03-2007, 08:26 PM
I have the NGK iridiums, BIG difference over the acdelco and the bosch i put in!

redhotalero
11-05-2007, 07:56 AM
Well, I put in ACDelco double platinums -- worked for my first 105k miles really well, so why change! My idle/midrange is SOOOO MUCH better, and as an added bonus my SES light went off! Hopefully my gas mileage will get back to what it used to be city driving...

Nice to know it was the plugs and not an O2 sensor or something...

Kyle
03-26-2008, 08:10 PM
Do the ac plugs come pre gaped?

cardude007617
03-26-2008, 08:30 PM
why woudnt they?

nickofcourse
03-26-2008, 08:39 PM
just buy a gauge and check them before you install them. simple and easy.

redhotalero
03-26-2008, 11:17 PM
Mine did, though the place that installed them (cousin owned, free labor!) was told to check first! :D

hass
03-27-2008, 07:43 PM
I switched to NGK Iridiums + new Wires after a LIM/head gasket change/resurface.
They seem superb.
Or it could be the combination of the engine actually working as intended for once.

But I have no problems with them =]

gaowners32
03-27-2008, 07:47 PM
sweet im doing my tune up in a couple days ill go pick some up.

SSRacer
03-29-2008, 01:09 PM
My autozone actually has AC Delco Iridiums in their computer as the factory plug. Just put a set in. Funny thing is, when you take them out of the box you see thay are actually made by NKG...lol

sam95ta
03-31-2008, 07:05 PM
Does any one have the part # for delco copper plugs.All I see is the platnium one's.Thanks.