Part number for compatible plug for fog lamp power [Archive] - GrandAmGT.com Forum

PDA

View Full Version : Part number for compatible plug for fog lamp power


lone_wolf025
03-31-2008, 08:09 PM
Ok here's the deal. I have the HID fog kit from Oz. The "male end plug" that fits into the power side of the plug coming from the car consists of two prongs. Unfortunately this is left open to the elements and corrosion. Currently its just bad enough to bump the resistance up just enough to pop the 10A fuse. I cleaned the contacts as best I could, resulting in the lights working for a few hours before the fuse popped again.

So, is there a plug that I can purchase that will fit the female end coming from the car? I figure if the contacts are sealed the problem is solved. Other methods are taping with electrical tape or taping a bag around the plugs. I'd prefer to get a plug if possible.