Headers anyone???

[lvemy3100]

http://mpracing.org/forum/index.php?topic=527.0

[Jake]

:eek:!!

[Ajaxus]

Why do I have to be broke????????? WHYYYYYYYYYYYYYYYYYYYYYYYYYY

[timberwoof]

damn it dude, bad timing on my part.

[williamGT]

I would like the ceramic coated with flex pipe without the cat......how much to ship to Yellowknife NT?......thats great:)

[lvemy3100]

I would like the ceramic coated with flex pipe without the cat......how much to ship to Yellowknife NT?......thats great:)

FREE SHIPPING in the US and $20 shipping to Canada (sorry, shipping to canada is expensive)


PM sent also

[timka86]

man oh man, i need to win the lottery asap.

[HaVoK~DOGZ~]

damn great deal.... ill probably be in but for just the headers and flex.. cause i just recently got a magnaflow catalytic converter......

[lvemy3100]

If the people who expressed interest so far pay the deposits this is where we stand right now...

2 sets - ceramic coated headers w/flex only
1 set - headers with flex only

3 orders total... only 2 others required for the 1st price tier... 7 more required for the 2nd price tier.

once we have our first 5 deposits those people will decide how much longer to wait for others to join

[mkopsi]

how long of a turn around time are we looking at?

[lvemy3100]

according to the manufacturer they are in stock and ready to ship so unless you opt for the Jet-hot coating it should only take the normal shipping time from Arizona to whatever state you are in.

[HaVoK~DOGZ~]

actually i want the ceramic coating headers

[lvemy3100]

fixed

[FusionDreams]

Hey Mark, I'd probably need like close to a month to come up with the full amount, but I would be interested in going with the entire setup.. I wouldn't have an issue with the $50 deposit by like, Wednesday, but how long would I have to turn around with the extra $600?

[williamGT]

im very instrested......$20 to canada for shipping? I priced it out from S&S and they said 350.00 to ship them, but thats UPS and they only use UPS.

[lvemy3100]

im very instrested......$20 to canada for shipping? I priced it out from S&S and they said 350.00 to ship them, but thats UPS and they only use UPS.

that is weird... i dont know what happend cause when i tried checking the first time it gave me a quote of $70 somthing... i tried this morning and now it says $392.83...


I guess I cant offer the $20 shipping to canada :(


sorry about that... if you are willing to pay the shipping charges I would gladly still give you the GB price minus $20 to help with the shiping costs...



also For everyones information... this GB is specific to the MPR Forum... if you truely want in on this you MUST be a member and PM me there...

[lvemy3100]

i was just over on aleromod.com and saw quite a few posts about people who wanted headers... *hint hint*

[lvemy3100]

well we have our first deposit in

1. lastryghts - Headers with Down Pipe and Cat (Ceramic Coated)
2.
3.
4.
5.

[lone_wolf025]

I'm seriously kicking this around, but I gotta see what my finances are looking like next week after I get paid. Also seeing as how I'm gonna wind up being a poor cash strapped college student soon, car toys are taking a back seat :(

[lone_wolf025]

Double post :D

I'm in. Figure I can swing a FEW "little" mods before I go :D

Deposit's on its way.

[lvemy3100]

That's 2 so deposits recieved so far :)

1. lastryghts - Headers with Down Pipe and Cat (Ceramic Coated)
2. lone_wolf025 - Headers with Down Pipe and Cat (uncoated)
3.
4.
5.

seriously guys if you know anyone who might want a set you may as well let them know what they gotta do to get one for less than retail ;)

[drumking1721]

im getting kinda interested as well...but my whole thing is,i dont know how to break the old ones off without breaking the bolts...

[lone_wolf025]

im getting kinda interested as well...but my whole thing is,i dont know how to break the old ones off without breaking the bolts...

Best way to get a bolt off that might crack is with an impact gun. Dunno how you'd fit it on our cars, but frankly, if the bolt's gonna break its gonna break, no two ways around it.

[drumking1721]

yea....i mean i know how to do all this stuff...its just i always run into problems...thats why i stick to planes as a profession..haha

[lone_wolf025]

yea....i mean i know how to do all this stuff...its just i always run into problems...thats why i stick to planes as a profession..haha

Hah hah. Sometimes ya gotta pay to play :P, but yea I know where you're coming from.

[vita]

interested... I would imagine those would fit on my 3.4 (3400 SFI series engine) Monte Carlo?

[lvemy3100]

unfortunately i dont think they will fit the Monte Carlo seeing as the Monte is built on a different platform..

IIRC there are Pacesetter headers available for your application...

edit - http://www.pacesetterexhaust.com/newscontent.php?migi_news_id=779&company_id=100503

[lvemy3100]

1. lastryghts - Headers with Down Pipe and Cat (Ceramic Coated)
2. lone_wolf025 - Headers with Down Pipe and Cat (uncoated)
3. surreal_awakeni - Headers with Down Pipe and cat (uncoated)
4.
5.

[lvemy3100]

only 2 more deposits left before the group buy pricing is official and we start voting on when to stop allowing for more deposits...

if we got 7 more people the price would be better for everyone ;)

[drumking1721]

the only thing holding me back is the install....afriad/i dont have all my tools

[lvemy3100]

REMEMBER - this is a first come first serve group buy... if we get our first 5 deposits and those people who have paid dont want to wait for another 5 the GB will end immediately.. if the first 5 say they wanna wait for another 5 to join we will only extend the GB till the 10th person pays their deposit.. once paid the GB will end and anyone who still wants in will be SOL...

I dont want this to drag out any longer than it absolutely has to...
with that being said...

if you know someone who might want in on this you might wanna tell them sooner than later ;)

[lastryghts]

Come on we need two more people because I want to stimulate the economy

[lvemy3100]

1. lastryghts - Headers with Down Pipe and Cat (Ceramic Coated)
2. lone_wolf025 - Headers with Down Pipe and Cat (uncoated)
3. surreal_awakeni - Headers with Down Pipe and cat (uncoated)
4. 03wraith - Headers with Down Pipe (uncoated)
5.

Only need one more!

[surreal_awakeni]

Alright....now we're talkin...one more!

As for stimulating the economy, I think I've already spent my stimulus check 5 times over on the Alero in the past 2 months lol

[lastryghts]

Same here Monday I drop my car off to get the Eibach springs, Agxs, sway bars and two wheel bearings.

[nickofcourse]

so its $682.05 for headers, flex and cat is that jet hot coated ot coated it will be a another 150? so 832.15?

[lvemy3100]

it would be $832.05 for Headers, down pipe and cat with jet-hot coating

normal price for this would be 717.05+ 150 for coating + shipping... basically 867.05+ shipping


in this case if there are 10 people the price would be another $32 less

[drumking1721]

im confused on the group buy thing..if we get 5,price goes down?

[lvemy3100]

in order for there to be a group buy there is a minimum order amount to get the discount off the regular price (in this case 5) if you get so many more people the price goes down again (in this case another 5 are needed)

for this particular group buy I am limiting the amount of order allowed to 10 which also happens to be the required amount of people needed for the 2nd discount tier to take effect for the group buy...

clear as mud :)

[drumking1721]

Alright thanks mark

[drumking1721]

check PM

[lvemy3100]

1. lastryghts - Headers with Down Pipe and Cat (Ceramic Coated)
2. lone_wolf025 - Headers with Down Pipe and Cat (uncoated)
3. surreal_awakeni - Headers with Down Pipe and cat (uncoated)
4. 03wraith - Headers with Down Pipe (uncoated)
5. drumking1721 - Headers with Down Pipe (uncoated)

That makes 5!!!

so how long does everyone want to wait for another 5 or do you want to stop now and get final payments out so you can get your headers sooner???

[drumking1721]

stop now..

[lastryghts]

Mark have you had anyone else show any interest in the group buy?

[lvemy3100]

just the people in this thread and the one on my site... even then there were a few who had to back out before sending deposits.

I really would have thought some of the aleromod guys/gals would want in on this but even that thread seemed pretty dead the last time I checked...

[lastryghts]

Maybe put up a post that we have five people now and give it a week for anyone else.

[lone_wolf025]

Post that 5 have been made and give them til the 30th. Then I say we close it up.

[lvemy3100]

ok so that is 3 saying get it done...


We have our first 5 deposits now so anyone else who wants in on this GB has until the 4th to contact me and make their $50 deposit... once received we will add your name to the list.

If we get another 5 before the 4th the GB will move to the next discount tier. Any less than 10 and the pricing stays with the first discount tier.

[drumking1721]

Yea i say wait till the 4th or whatever....Just keep pushing for 5,then if its just us then their loss...

[PhantomLover007]

I'm not buying into this Mark, but I'm gonna go w/ the other guys. If this is the 1st buy for this type of thing, go w/ the smaller group first, to get it out of the way and to alleviate any possiblilities of something getting messed up in a larger group buy due to someone dropping out and the folks that really want the stuff not be able to get it. If other folks want them, get another group of 5 going then. Just my $.02 worth.

Sorry for the run on sentence. ;crap

[lastryghts]

I think the $50 deposit is going to keep people fron backing out.

[drumking1721]

So when do we pay the rest?

[lvemy3100]

technically not due till the after the 4th.. I am hoping a day or 2 after the fourth to have all final payments in

[drumking1721]

K well let me know...Ill be checking,and im kinda being impatient :)

[lone_wolf025]

I'll be sending my payment in once I get that rebate $$

[lastryghts]

3 days left for people to get in on an awsome deal.

[woodplock7]

ahhh i really want to get in on this!!! i just gotta make sure i can afford em :( if i dont get the cat i can use any highflow cat and it will work just as well correct?

[drumking1721]

You guys have till monday...ya better decide!!!!!!!!!!!

[lvemy3100]

ahhh i really want to get in on this!!! i just gotta make sure i can afford em :( if i dont get the cat i can use any highflow cat and it will work just as well correct?

no you dont have to use the highflow cat S&S offers as an option with the headers but it would likely be an easier install if you did.

you can use any cat you want including a stock cat if you cant afford the one S&S offers

[lvemy3100]

bump... last day to get in on this...

[drumking1721]

mark did you get the rest of my dough?

[lvemy3100]

indeed I did :)

[gilzgrandam00]

mark is it poss. to just get the down pipe and cat cause i have the headers let me know pm me

[toysruskid]

So as of right now its 682.05 for ceramic coated headers, flex, and cat shipped?

[drumking1721]

werd

[lastryghts]

Just to make sure I need to send you $782.05 for my ballance? I will sen it tomarrow after work.

[lvemy3100]

Just to make sure I need to send you $782.05 for my ballance? I will sen it tomarrow after work.

correct

[drumking1721]

mine shipped yet :) ?