programming keyless entry [Archive] - GrandAmGT.com Forum

PDA

View Full Version : programming keyless entry


ridefas78
04-22-2008, 08:52 AM
what are the steps in programming teh keyless entry on a 99 grand am gt?

surreal_awakeni
04-22-2008, 09:11 AM
I believe the 99 has to go to the dealer. Programming requires a Tech 2 if I'm not mistaken. Somebody correct me if I'm wrong about that.

Hotrod6
04-22-2008, 09:32 AM
You can program the 99's i just posted this not long ago

ridefas78
04-22-2008, 03:39 PM
well my car isnt set up with keyless entry :(

surreal_awakeni
04-22-2008, 08:39 PM
Um.... ok, maybe I'm missing something. It's late and I'm tired....

If you're car's not set up with keyless entry, why would you ask how to program the keyless entry on a 99 GAGT?

ridefas78
04-23-2008, 05:52 AM
i didnt know that i couldnt use keyless entry i figured that since the car was a gt model it should come with it so i bought a remote but i guess the "brain" is not set up for the keyless entry. thats basically what they told me at the dealer...but does any1 want to buy a remote ill sell it cheep

stingray71
04-25-2008, 12:29 PM
You can program the 99's i just posted this not long ago

I searched, but couldn't find your post. Do you have the link to it?
Thanks

Mike Jung
04-25-2008, 06:50 PM
I believe the 99 has to go to the dealer. Programming requires a Tech 2 if I'm not mistaken. Somebody correct me if I'm wrong about that.
x2

Hotrod6
04-25-2008, 08:22 PM
This is for the 99's

1)With the driver door closed, hold down the power unlock button on the door panel.
2)Turn the ignition switch to the ON position
3)Turn the ignition switch to the OFF position
4)Turn the ignition switch to the ON position
5)Turn the ignition switch to the OFF position
6)Release the power unlock button on the door panel.
The remote control door lock reciever will respond in the following manner in order to indicate that the receiver is in the programming mode:

6.1)Locking the doors
6.2)Unlocking the doors

IMPORTANT:
All extra transmitters must be programmed at this time. When a new transmitter is programmed it will deactivate the old transmitters.

7)Hold down the lock and unlock buttons on the transmitter until the remote control door lock reciever will respond in the following manner:

7.1)Locking the doors
7.2)Unlocking the doors
Repeat step 7 for each additional transmitter
9) Turn the ignition switch to the ON position in order to exit the transmitter programming mode.