Polished RSM STB and Billet Strut Cover/caps

[CUSTOMGAGT2000SEDAN]

i had them polished both front and back cost me total $330 just to polish like chrome. .back not shown yet but is on. now i supose i will have to take them off any time someone esle works on the car. sucks. i added all S/S hardware .

you can not see to well except side shot from passenger side , but i also added my MAP cover with MRZ ingraved on it. some day will get valve covers and 3400 manifold polishe to high shine . IF THINGS GO good as time rolls by.

[stewartfn18]

nice

[PhantomLover007]

Damn. Very clean man. All the MRZ stuff and the cover have been on my list of things to get.. along w/ alot of other things... lol ;crap

[CUSTOMGAGT2000SEDAN]

i still have the stb tower covers to put on. but there seems to be various opinions as to whether the loosing of the 3 tower bolts and then adjust the top of the strut around just a bit to snap covers in, will throw my alignment off. i twice asked MRZ. they say it won't change alignment. a few here on the site and my neighbor says it will.


PS: stewartfn18 how do i add the extra details about mods to my car like you did . and have it show each time i post ??

[hepy117]

You spent $330 for them to polish it? That's crazy imo. But if you like it that's all that matters. I could personally spend $330 on something more practical. But like I said, whatever makes you happy.

[CUSTOMGAGT2000SEDAN]

to polish i think tends to cost more then plating but gives you better results if the items can be polished.

[DrFabulous]

I want your cover

[CUSTOMGAGT2000SEDAN]

you can have it the year i get the manifold polished or pianted but by then you may not even have you car .. aren' t they available thhrew gm atleast???

[DrFabulous]

you can have it the year i get the manifold polished or pianted but by then you may not even have you car .. aren' t they available thhrew gm atleast???

Like, you're giving it to me? lol


I know the part numbers and everything, just want to spend the $50 elsewhere

[CUSTOMGAGT2000SEDAN]

i had gm pain the cover . close but not exact matching blk. then to red decal the 3400 sfi. but the guy did a crap job decaling . i wanted painted 3400sfi. but they said that would be tuff and more expensive and may not turn out good.

[DrFabulous]

i had gm pain the cover . close but not exact matching blk. then to red decal the 3400 sfi. but the guy did a crap job decaling . i wanted painted 3400sfi. but they said that would be tuff and more expensive and may not turn out good.

Its just plastic, right? You could tape/spray paint it.

[CUSTOMGAGT2000SEDAN]

Ya plastic comes grey with silver 3400sfi. And glued grey foam on the underside. The extenion oil cap neck is bought separately.

[stillriza]

Everything is so CLEAN!!

[CUSTOMGAGT2000SEDAN]

actually the air box and hose etc needs to be cleaned . just can not see it in photo's . wires to be cleaned . all that detail stuff. but general appearance yes clean looking

[CUSTOMGAGT2000SEDAN]

i finally got my MRZ stb tower caps/covers installed . MAYBE i can use them for some other car someday. and good thing i had the bars polished or esle it would have looked terrible.




http://www.grandamgt.com/forum/attachment.php?attachmentid=26867&stc=1&thumb=1&d=1222482621 (http://www.grandamgt.com/forum/attachment.php?attachmentid=26867&d=1222482621)http://www.grandamgt.com/forum/attachment.php?attachmentid=26868&stc=1&thumb=1&d=1222482627 (http://www.grandamgt.com/forum/attachment.php?attachmentid=26868&d=1222482627)http://www.grandamgt.com/forum/attachment.php?attachmentid=26869&stc=1&thumb=1&d=1222482636 (http://www.grandamgt.com/forum/attachment.php?attachmentid=26869&d=1222482636)http://www.grandamgt.com/forum/attachment.php?attachmentid=26870&stc=1&thumb=1&d=1222482644 (http://www.grandamgt.com/forum/attachment.php?attachmentid=26870&d=1222482644)

[Mendoza]

Lovin the polished look.

[TFA]

very nice man. I just ordered a few parts from MRZ myself :angel