eaton supercharger [Archive] - GrandAmGT.com Forum

PDA

View Full Version : eaton supercharger


ridefas78
07-24-2009, 09:39 PM
would a Eaton supercharger. M60. work on the1999 3.4 grand am?

Nick-G
07-25-2009, 04:08 AM
No.

KhellendrosxS
07-25-2009, 05:24 AM
Seeing as there is no such thing as an M60 the answer is no.

This question has been asked over and over and over and over since I joined in 2006 and the short answer is no.

The long answer could be found by using the SEARCH button.

lone_wolf025
07-25-2009, 11:44 AM
I thought it was that the M60, which is the one that isn't produced but has a few floating around, would work and that the M90, which is the one off the 3800 wouldn't. Or am I getting my designations mixed up?

Regardless, there is currently NO eaton super in production that will fit. That much I know.

DrFabulous
07-25-2009, 12:06 PM
I thought it was that the M60, which is the one that isn't produced but has a few floating around, would work and that the M90, which is the one off the 3800 wouldn't. Or am I getting my designations mixed up?

Regardless, there is currently NO eaton super in production that will fit. That much I know.

Wasn't the M60 off older model 3800s and M90s off the newer? I can't remember.

Somewhat offtopic, I grew up like 15 minutes from the Eaton building, and it didn't dawn on me until like a year ago that it was the same company that built all the various aftermarket parks. I even knew a kid whose dad worked there. lol

lone_wolf025
07-25-2009, 12:40 PM
Wasn't the M60 off older model 3800s and M90s off the newer? I can't remember.

Somewhat offtopic, I grew up like 15 minutes from the Eaton building, and it didn't dawn on me until like a year ago that it was the same company that built all the various aftermarket parks. I even knew a kid whose dad worked there. lol

Honestly I dunno and I'm too lazy to look it up.

boost21
07-25-2009, 01:04 PM
M62 with a custom spout was what is used on the grand am 3400's

[ChaosweaveR]
07-25-2009, 01:19 PM
M62 with a custom spout was what is used on the grand am 3400's

And good luck finding one. lol

stewartfn18
07-25-2009, 01:54 PM
;1086385']And good luck finding one. lol

i agree^^^^

lone_wolf025
07-25-2009, 02:22 PM
M62 with a custom spout was what is used on the grand am 3400's

Ah yea I thought it was M sixty something at least

AaronGTR
07-25-2009, 06:01 PM
Eaton M62 was used for the magnacharger kit, the series 1 blown 3800's, and the blown cobalt SS (or was it an M45?). Designated M62 because of the volume of 62 cubic inches. M90 is 90 cubes and was used on the series 2/3 3800's. M112's were used on the ford mustang cobra and svt lightning, and various LS engine SC kits. :D