gasket [Archive] - GrandAmGT.com Forum

PDA

View Full Version : gasket


Mattyj724
07-29-2010, 10:52 AM
What can i use for a gasket on the SS headers that connects the Front to the rear set?? i never can get a straight answer>?

G.I.Ceo
07-29-2010, 11:07 AM
What can i use for a gasket on the SS headers that connects the Front to the rear set?? i never can get a straight answer>? It's a donut gasket. I can shoot you a picture of one if you would like.

G.I.Ceo
07-29-2010, 11:30 AM
This is what you need right here.

http://www.summitracing.com/parts/EDL-6937/

Mattyj724
07-29-2010, 12:08 PM
What about bolts??will any due? or do they have to be a certin type due to the Temp the headers will be

AaronGTR
07-29-2010, 05:27 PM
I recommend stainless steel so they don't rust. Regular ones from lowes/home depot will work. Just get them about 1/2" longer than needed so they are easy to get started, and get some flat washers for both sides and a spring washer for each to keep the nut from rattling loose.

remiljr
07-29-2010, 05:35 PM
spring washer = lock washer