View Full Version : New Taillights
04-04-2011, 08:05 PM
Ok i cannot figure this out for nothing. I purchased new tail lights and for some reason when i braked the driver side reverse light came on, i flipped the bulb and that solved the issue. now when i apply the brakes only the passenger light comes on, but all blinkers and reverse lights work just not the brakes, the tail light is just out except for blinkers. any ideas? all bulbs were replaced and still nothing.
04-04-2011, 08:10 PM
what style of tail lights are them???
04-04-2011, 08:18 PM
04-04-2011, 08:54 PM
Sounds like you have the harnesses mixed up. Double check them, make sure the left and right sides are on the correct sides.
04-04-2011, 08:58 PM
Any ses lights pop up? might need to get a scan to see whats going on, i had to put a 2.5k 1/2 watt resister on my after market third break as there wasnt enough resistance and it was generating ses and abs codes. resister solved it. Get a scan done and see what codes are generated(if any)
04-04-2011, 11:43 PM
Did u mix up the single and dual filament bulbs?
vBulletin® v3.7.2, Copyright ©2000-2017, Jelsoft Enterprises Ltd.