wheel hub bearing assembly bolts [Archive] - GrandAmGT.com Forum

PDA

View Full Version : wheel hub bearing assembly bolts


kiryu002
10-21-2012, 08:38 AM
Car is a 2000 Grand Am GT Sedan V6. I went to replace the front wheel hub bearing assembly but one of the 3 bolts on the back that holds the hub is strip. I have taken two bolts out but its the top one that was strip. I'm in the processes cutting it out and was wondering where to find a replacement bolt for it? Any store carries one or auto parts carried one?

shiwnath
10-21-2012, 11:01 AM
A junkyard would have what you're looking for. You could also try a hardware store. All you need to know is the actual specs of the bolt.

AaronGTR
10-21-2012, 12:25 PM
Yeah... junkyard or dealership. Or just take one of them to a hardware store. It would be best to have all the same bolts in there (so you know they are the same spec and strength), but if you can't find one anywhere else you can use a different bolt as long as it's the same thread and length.

rocketfast123
10-22-2012, 09:15 AM
Make sure you have grade 8 bolts. You don't want a wheel falling off.