View Full Version : 2000 Grand Prix Dome light replacement and Keyless entry how to reprogram
12-30-2012, 06:33 PM
Since I cant find a good forum site for my grand prix I decided to post it here
I need someone to explain or give me a guide to replace my map lights on my 2000 grand prix gt with sun roof... I think im just over thinking this but I don't want to break anything...
Also I don't know how to program the keyless entry remote I broke the first remote I had from dropping it... I would like a guide for both thanks!
12-30-2012, 06:42 PM
pics of the lights would be very helpful
12-30-2012, 06:55 PM
cant find the exact same one but only difernece mine has a sunroof switch in the middle
12-30-2012, 07:01 PM
wow thats a stumper....normally they snap in place
i would take a small flat head and gently go around the edge and see if it pops out....
12-30-2012, 07:05 PM
sounds good I think im going to try it tom. just afraid of breaking it... upgraded all interior lights to leds besides these last two...
12-30-2012, 07:07 PM
if you can get the interior nice an warm then park in a heated garage.....plastic gets fragile when cold. less likely to break if its warm
12-30-2012, 07:08 PM
cant that's what sucks
12-30-2012, 07:12 PM
then just drive around a bit with the heat on really high. park and leave it on....should be enough
as for the remote might need to take to a dealer....not sure though
12-30-2012, 07:14 PM
ok thanks man nice GA
12-30-2012, 07:17 PM
Go here for map lights. http://m.youtube.com/#/watch?v=E_nuUBfNJ9w&desktop_uri=%2Fwatch%3Fv%3DE_nuUBfNJ9w As for the keyless entry, I'm almost positive you need a dealer to program the remote.
12-30-2012, 07:26 PM
mine is a little different I have the sun roof button in the middle the setup is a little different let me find a pic
12-30-2012, 07:28 PM
Should be about the same concept though.
12-30-2012, 07:29 PM
found this pic on ebay
12-30-2012, 07:33 PM
Like this one?
12-30-2012, 07:39 PM
12-30-2012, 07:48 PM
Ya, same concept just take off the whole panel, then remove four screws, remove panel, and they're right there.
12-30-2012, 07:55 PM
wasn't a good video... just pull straight down the middle in the front correct?
12-30-2012, 08:00 PM
wow that so dumb....
but ya just watched it appears it just unsnaps
12-30-2012, 08:03 PM
Ya, video quality sucked, glad I didn't make that one. Yes, just pull down with a straight blade screwdriver, and should pop right out.
12-30-2012, 08:13 PM
Heres a cool dual purpose mod with the map lights you might be interested in. http://www.gpona.com/forums/97-03-grand-prix-discussion-f13/dual-bulb-dual-purpose-map-lights-with-vid-t14083.html
vBulletin® v3.7.2, Copyright ©2000-2017, Jelsoft Enterprises Ltd.