Blower motor not working? [Archive] - GrandAmGT.com Forum

PDA

View Full Version : Blower motor not working?


Gtomike72
01-26-2013, 07:08 AM
I can feel heat but feels like its on the low setting. I checked the fuse underhood and was good, any ideas?

[ChaosweaveR]
01-26-2013, 07:31 AM
Blower motor resistor maybe? Do all five fan speeds work?

TDavis
01-26-2013, 07:53 AM
Fan speeds 1 and 2 stopped working for me when my blower motor resistor crapped out. Dunno if its the same number for other people.

Gtomike72
01-26-2013, 08:03 AM
Is that an easy fix?

[ChaosweaveR]
01-26-2013, 08:06 AM
Is that an easy fix?

Yes and no. It's right behind the blower motor which is behind the glove box. Easy to get to, hard to cram your hands behind it and remove it.

TDavis
01-26-2013, 08:11 AM
Go to Napa or O'Reilly's to get a new one. I got mine for around $20 with a lifetime warranty.

Gtomike72
01-26-2013, 08:57 AM
Cool I keep y'all posted

bricooper78
01-26-2013, 05:45 PM
Sits right up above the passenger footwell, there is a good couple of how-to's on here about it.. I'll try to dig up the link

this one isn't too bad, not what I wanted, but it's here.

http://www.grandamgt.com/forum/showthread.php?t=1346&highlight=blower+resistor

3800L67GAM
01-26-2013, 08:45 PM
I can feel heat but feels like its on the low setting. I checked the fuse underhood and was good, any ideas?

Sit in the passenger seat and kick under the glove box. I tried it and it works at all speeds!

[ChaosweaveR]
01-26-2013, 08:57 PM
Sit in the passenger seat and kick under the glove box. I tried it and it works at all speeds!

http://i34.photobucket.com/albums/d102/Xaus59/random/44BED3E8-6417-4891-992D-78C9251D7413-37901-00001FE94B210094.jpg

3800L67GAM
01-26-2013, 09:01 PM
;1202116']http://i34.photobucket.com/albums/d102/Xaus59/random/44BED3E8-6417-4891-992D-78C9251D7413-37901-00001FE94B210094.jpg

Get A life

pongagt
01-27-2013, 12:54 PM
If the high speed position does not work then the problem is not the resistor board.

patti
04-08-2013, 04:16 AM
This is my first post, so I'm hoping this is the right place to post this....

Thanks to this forum, I was able to replace the blower motor resistor instead of fooling around with it with no idea what the problem was.

However... believe it or not, the new AC Delco resisitor was bad! All speeds blew, but 1 & 2 were VERY slow... 3 was ok... 4 was SLOWER than 3... and 5 was a hurricane. :-)

Got another resistor and all is well.

sleepyalero
04-08-2013, 04:29 AM
i need to do mine. lol ive had that problem for years.

bricooper78
04-08-2013, 08:07 PM
Hi, welcome aboard, You can go to the newbie section and post up some pics and anything you've done to your car, and we'll harass you on a more personal level there!!! :D

TDavis
04-08-2013, 08:08 PM
I couldn't stand when my Blow motor resistor died. 1 and 2 didn't work but 3,4,5 did. Never realized how much I used 1 and 2 until they where gone lol.

Simple $20 fix at Napa or O'Reilly's.

tw0123
04-08-2013, 09:19 PM
I only have 5 on mine... need to get this done...