Trouble Code p0013 [Archive] - Forum


View Full Version : Trouble Code p0013

04-19-2013, 05:19 PM
As the title says I have a trouble code p0013 as checked from O'reilly auto parts. Just came on yesterday. Intake air temp sensor. Ok so I replaced the sensor and wires I had a crack in the black wire. Got a new pig tail from them. So new sensor and new wire. I soldered the wires together and used heat shrink. And I still have the check engine light. Does this code need to be erased or does it go away when problem is fixed? Guy at part store said he is not authorized to clear the code.

04-19-2013, 07:04 PM
If the problem is really fixed, then the trouble code should clear itself and turn off the SES light after the PCM completes several test cycles within normal parameters. If the problem is not fixed then the SES light will stay on. You can also disconnect the battery to clear the stored code as well.

04-20-2013, 12:24 AM
Had it checked again today same code came on. I will disconnect the batt overnight and see if it will clear the code out. Thanks