GrandAmGT.com Forum

GrandAmGT.com Forum (http://www.grandamgt.com/forum/index.php)
-   All Show (Appearance modifications) (http://www.grandamgt.com/forum/forumdisplay.php?f=8)
-   -   Help with installing new HID Halos (http://www.grandamgt.com/forum/showthread.php?t=86989)

dominus99 03-25-2012 05:00 PM

Help with installing new HID Halos
 
5 Attachment(s)
I purchased a new pair of HID halos i had an HID kit( http://www.amazon.com/Pontiac-Bi-Xen...d=WZ7R8S621411 ) on my car all ready but one of the bulbs went out on it, so i figured i would go with a new look and got these
http://www.ebay.com/itm/12000K-HID-9...ht_6183wt_1270 the link here is for the 12k kit i got the 10k they dont have it on the eaglemotorsports website anymore but the same thing. The kit came with only a balace and bulbs and tried installing but got lost. NO directions. Any one on here think they can guide me on how to install the HID kit? i got the regular halos in my car right now just with the original bulbs it came with, but i would like to put the blue 10000k bulb in them... please help.

dominus99 03-25-2012 05:04 PM

2 Attachment(s)
some other pics..

speedfreak1 03-25-2012 08:21 PM

take your holegen bulb out. plug the conector from the old bulb to the spade conectors on your harness in your pick. then plug the harness to the ballest. then the wires on the ballest go to the other conecters on the harness. you cant mix anything up. its all plug and play

dominus99 03-25-2012 09:38 PM

Quote:

Originally Posted by speedfreak1 (Post 1174063)
take your holegen bulb out. plug the conector from the old bulb to the spade conectors on your harness in your pick. then plug the harness to the ballest. then the wires on the ballest go to the other conecters on the harness. you cant mix anything up. its all plug and play

okay so the ballest does not plug into my battery or anywhere? where do i ground it? see the small wires red and black

speedfreak1 03-25-2012 10:35 PM

the red and black wires are for the H1 bulb conecter thats on your headlights. they go to were you plugged the holegen bulbs before. it uses the power and ground in the headlight wiring

lydigt 03-27-2012 03:36 AM

The kit came with only a balace and bulbs and tried installing but got lost;crap

1HOT SE 03-27-2012 11:34 PM

Good thread. I to have the same Headlights, but with out the HIDs. I was thinking of getting an HID kit, and will follow this thread closely to see what the oucome is. dominus99 I would like to contact you in the future to see how it turned out for you and what you did for the install. Feel free to PM me with any info. Thanx
There should have been 2 in the kit. Email them back to check.

dominus99 04-02-2012 10:04 PM

Thanks!!
 
Quote:

Originally Posted by speedfreak1 (Post 1174074)
the red and black wires are for the H1 bulb conecter thats on your headlights. they go to were you plugged the holegen bulbs before. it uses the power and ground in the headlight wiring

okay did what you said to do took about 10 minutes thanks a lot...a little disappointed in the brightness its self my other kit was way brighter but this is a low beam kit...


All times are GMT -6. The time now is 09:31 AM.

Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 2011 GrandAmGT.com