GrandAmGT.com Forum

GrandAmGT.com Forum (http://www.grandamgt.com/forum/index.php)
-   Technical Q&A (http://www.grandamgt.com/forum/forumdisplay.php?f=22)
-   -   head bolts/ gaskets TORQ SPECS STRAIGHT FROM FEL'PRO (http://www.grandamgt.com/forum/showthread.php?t=88094)

ugod02010 09-19-2012 05:00 AM

head bolts/ gaskets TORQ SPECS STRAIGHT FROM FEL'PRO
 
I was researching about possibly reusing my head bolts on a mazda 626 I was working on for a friend and came across this page. while it isn't G/A only it does have plenty of info for all you do it yourselfers. or just researching into things.
Hope it helps at least someone
GOOD LUCK and keep the passion alive!!!
http://olybrake.com/pdf/fel_pro_torque_specs_guide.pdf

ugod02010 09-19-2012 05:03 AM

it also has some info about reusing TTY head bolts I am about to do this on the mazda since they are within the specs for reuse and no one including the dealer around here can get them for me. only ebay but when buying parts like this i think i am safer to reuse than take my chances on something internal on an engine... I am not saying everything on ebay isn't worth it i am just a little weary about something so important..


All times are GMT -6. The time now is 01:06 PM.

Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 2011 GrandAmGT.com