GrandAmGT.com Forum

GrandAmGT.com Forum (http://www.grandamgt.com/forum/index.php)
-   Technical Q&A (http://www.grandamgt.com/forum/forumdisplay.php?f=22)
-   -   HELP! 2000 grand am missing EGR valve and whatever it attaches to (http://www.grandamgt.com/forum/showthread.php?t=88123)

bill Dot 09-23-2012 06:31 PM

HELP! 2000 grand am missing EGR valve and whatever it attaches to
 
I have a 2000 grand am SE 2.4L. It has a very rough idle. i have already had the plugs replaced along with the ignition adapter and the plug boots. i pulled out the IAC and it was BLACK. carbed up completly. i cleaned it up and thought about the EGR valve being carbed up. so i removed the air intake from the throttle body to get to the EGR valve. but when i got to where the EGR should be there was nothing there. i did some more research and whatever the EGR valve mounts to is missing as well. all that was there was a gunked up area and a hole into the motor. see image below. the picture was taken after i cleaned the surface. Can anyone tell me what part im missing that the EGR was attached to and could this have caused damage to my engine? What do i do now?
Please help and thanks in advance

http://www.grandamgt.com/forum/attac...1&d=1348445767

unchained_01 09-23-2012 06:35 PM

i answered your other post


All times are GMT -6. The time now is 04:37 PM.

Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 2011 GrandAmGT.com