GrandAmGT.com Forum

GrandAmGT.com Forum (http://www.grandamgt.com/forum/index.php)
-   Blowers,Turbos,N2O specific topics (http://www.grandamgt.com/forum/forumdisplay.php?f=37)
-   -   MP 62 kit adhesive (http://www.grandamgt.com/forum/showthread.php?t=91087)

AleroB888 07-18-2016 03:29 PM

MP 62 kit adhesive
 
In another thread, the sealant used to assemble the rotor case to the inlet/outlet casting was given as:

Permatex Anaerobic Gasket Maker (part# 51817 or 51813).

Is that correct?

AaronGTR 07-21-2016 07:14 AM

Yes, you can use that.

AleroB888 07-21-2016 09:36 AM

Thanks!

Slinky 07-21-2016 02:14 PM

Somewhat off topic,but alerob888 how is the new build coming along? I saw you were having some issues, did you get them worked out? Fill us in!

AleroB888 09-11-2017 03:06 PM

OK, I am about ready to reassemble the casting to the blower case on a refurbished MP62 unit. Since there is virtually zero clearance, and the 4 mating surfaces have to be positioned at the same time, are there any hints you can give as to the best way to do it?


All times are GMT -6. The time now is 04:19 PM.

Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 2011 GrandAmGT.com