View Single Post
Old 01-20-2010, 01:12 PM   #1
350
GAGT - Newbie
 
AKA: AL
Join Date: Jun 2004
Location: Ruston, LA
Age: 30
Posts: 12
Vehicle: 1998 Grand am GT Coupe
350 Gettin' there
FS: 4th Gen projectors W hids

Plug and Play 4th gen HID projector headlight retrofit.
Here’s the original link to the project. I did a very simply projector retrofit nothing fancy just a projector in a housing a little paint and excellent light.

I used a simple 4 bolt and nut system to aim the projector. The lights were aimed perfectly when they came off the car so they should be good to go. The headlight casing wasn’t resealed just in case I had to re aim the projectors. I put the clips back on and the heat from the headlight and the old adhesive has rebounded but a screwdriver will open them back up if you want to paint, re-aim, or glass, whatever.

The light output on these is a beautiful brilliant white with just a tinge of summer sky blue. The second video posted actually depicts the light temp very well. The cutoff is great and it does have that color shifting prism but it is not as thick as on other cars.

To get the lights aimed I only used the bolt pointed to in the picture. The other two were pulling the light down a couple degrees to far. It worked fine with that one bolt the housings never moved a bit until I had the WP replaced and I had to re-aim the passenger one.

You'll want to pick up some Plastx from meguiar's to keep the lense looking clean.

P6 projectors
Xentec 5000k 35W HIDs
OEM Housing

VIDS


PICS

$175 shipped Paypal CONUS insured w tracking.
Feel free to ask any questions or if you need a specific pic angle.
al.kellyii@gmail.com


350 is offline   Reply With Quote