View Single Post
Old 02-08-2008, 11:42 PM   #2
timka86
6 Speed GT
 
timka86's Avatar
 
AKA: Tim
Join Date: Jul 2005
Location: Glendale Heights, IL
Age: 31
Posts: 645
Vehicle: 2005 G35 Sedan 6MT
timka86 Gettin' there
Send a message via MSN to timka86
you will need both of the G6 axles, drivers and passenger side as they are different, unlike the Grand Am axles which are identicle on both sides, the driver's side as a male inboard end and a female inboard end on the passenger side for the G6. They also have a third axle (a jack shaft) or intermediate shaft that mount behind the block because the stickshift trans is smaller then the 4t45e that the grand ams come with.

Top axle is a stock grand am axle(dark in color), bottom is a G6 axle (light in color)

and as you can see the outboard CV's are identicle on both G6 and Grand Am axles. Same length too.

__________________
EX-Owner and builder of the first ever 6 SPEED GRAND AM
http://www.grandamgt.com/forum/showthread.php?t=73212

Last edited by timka86; 05-17-2008 at 09:14 PM.
timka86 is offline   Reply With Quote