Found SC/T Spoiler Manufacturer

[-trigger-]

Originally Posted by CUSTOMGAGT2000SEDAN

when you folks get your spoiler . and you send me photo of all the hardware , and if you get instructions. not sure if i am missing any one piece or not . and not sure what some of the unusal pieces are. i thought i would see 2 large gaskets the shape and size of the bottom of legs??

most of the gaskets come off with the original spoiler, though you need to scrub the glue off to avoid an outline. as for hardware i got 4 screws and washers and these useless covers for the screws, no instructions necessary

[xshenanigansx]

well that sucks if it doesn't come with the gaskets... cause i never had a gt spoiler... hmm.. i'll still make it work. I'm praying it'll fit over the drilled holes i have with my Alero spoiler.

[CUSTOMGAGT2000SEDAN]

post your pictures of all hardware.

caps for screws does not look like i have those unless those are the what look like blk hole plugs. if that's them they do not seat flush / well on the roundish head of screws. i will replace screws and washers with S/S .

and what do your new gaskets look like. i have what looks like 4 or 8 donut shape foam gaskets about an inch round outside diameter . there is 2 square foam pieces with 4 donut round gaskets in each to punch out ... are there supose to be 4 or 8 .

i did ask for extra for another spoiler . but they said they shipped mine out but if they could locate more they would send . but they did not say they sent extra gaskets .

there's no style of gasket that is the shape or full shape of the bottom of the legs.

if that's all there is for gasket then any part of the outside bottom edge of the legs will be sitting right againest the paint .

and if the bottom of the legs is not perfectly smooth i would think any gap ,you have would allow water to creep under the bottom of the legs.

see my *** legs have a gasket full shape and size of leg bottoms.

NEED PHOTO"S. as far as old gasket well mine are old *** gaskets .

WHAT are those 4 blk long curved shape pieces for ??? they look a wee bit like ties but are not . and how do they play a part.

[-trigger-]

i dont have a digital camera so cant post pics. there are new gaskets on the one i got, they were already glued to the legs and in the correct shape. Not sure of the curved shape pieces you speak of, did not receive any though might have thrown them out w/ the box. Reusing old gaskets would be difficult since they are the wrong shape and get torn up with removal.

[CUSTOMGAGT2000SEDAN]

when you say correct shape what do you mean. are they about 1" inch round donut / flat washer style or the exact same shape as the bottom of the legs. what's your email i send you photo of my hardware you tell me how it matches yours .

and the next person that gets the spoiler please send me photo's of the complete hardware...telliott@accesswave.ca ... . or at worse describe it. i am not sure they sent me the right gaskets etc.

see the thing is i had asked them to open the the box the spoiler comes in to them, and check spoiler so as to rule out any possible factory damages or major flaws. better to catch any early problems down in usa versus here. but when they did they left out the hardware. so i got it to today but did i get the right stuff.

[xshenanigansx]

did you guys notice they changed their spoiler page on the elite spoilers website? They now keep most colors of sc/t spoilers in stock, already painted for faster shipping! They also changed their colors list... my color Victory red.. use to be on their list... now its not... but they still said they can paint to any color code.

[CUSTOMGAGT2000SEDAN]

i should check to see if they added my colour....hey xshenanigansx please send me pictures of your hardware when you get it. the sooner the better by anyone PLEASEZZZZZZ

[CUSTOMGAGT2000SEDAN]

camera phone works too.

[CUSTOMGAGT2000SEDAN]

xshenanigansx , looks like you put the bug in there ear, and they decided to not run into the re-paint / later shipping of spoilers they had in your case.

[CUSTOMGAGT2000SEDAN]

still don't have my colour so at least they had yours . sucks no even be acknowledge LOL... they list that sc/t spoiler for 2005 to 2008 too???

but my jeep is the same deal NO one out of thousands of jeep parts suppliers ever carry aftermarket or even dealer HONEY colour items or even the materials. for all my interior and soft top , bikini top and saddle bags etc etc . again i had bought a jeep with a rear colour.

[-trigger-]

the gaskets are in the shape of the bottom of the legs. simply remove the stock spoiler, clean the surface of the trunk lid and screw on the new spoiler. dont see how any leaking problems or paint on paint surface touching would be possible.

[CUSTOMGAGT2000SEDAN]

send me an email anyone that already has the spoiler. so i can find out if i got the wrong hardware PLEASE. if it wrong i have to move fast. my gaskets are not the shape of the bottom of the spoiler legs they are 4 or 8 simple foam round donut shape gaskets about 1" inch outside diameter.

[CUSTOMGAGT2000SEDAN]

photo of my hradware kit added take a look above

[-trigger-]

Originally Posted by CUSTOMGAGT2000SEDAN

photo of my hradware kit added take a look above

^ pmd

[CUSTOMGAGT2000SEDAN]

pm'd you . yes i hope they send me the right gaskets . just because i asked them to check the item before shipping and they left the original proper hardwareetc out does not work for me. what are the blk plastic ties things how do they work.

[xshenanigansx]

Yeah i'll put mine up when ever The Hell I get mine! haha The Tracking number they gave me STILL hasnt been updated for 3 days now( not their fault). Hopefully my hardware is right... yeah i was wondering why it said 2008? i'd like to meet someone who drives a 2008 grand am.

[PhantomLover007]

What the hell are the plastic ties for? The small gaskets are ridiculous.

I got a gaskets that fit the base of my spoiler, but then again, I got mine from a whole different company.

[CUSTOMGAGT2000SEDAN]

what company did you get yours from. email , contact name etc etc etc. if i have to maybe i can buy some from them

[xshenanigansx]

Finally Got my Spoiler guys!
heres the packaging, hardware and spoiler I didn't get ANY gaskets.... I notice there are TWO sets of screws for each side... I'd rather NOT have to drill 2 more holes... think I can get away with just 2 screws?

[xshenanigansx]

Just noticed that I have to Re-Drill all new holes... GAH.