Busy Sat. (3 gauge pod and engine painting for me :D )

Tonyyank · 02-18-2003, 12:53 PM

Well this weekend Brenden, Amber and I wanted to get our cars just a lil better then they already were

Ambers car got - Jamstraights moded and installed, Neon wires fixed, and misc fuses replaced

Brenden's car got - Rewired ground for interior light mod, Installed Tranny sender and wired up Trans temp gauge.

Tony's car got - Jamstraights moded and installed, engine painted, Installed 3 gauge pod, A/F ratio gauge, Oil pressure sender and gauge, and cleaned air filter

Oh yeah and Amber decided it would be funny to pick off my front inlay cause it was missing the "I"

Thanks to Amber, Brenden, Seth, and Jeremy for all your help!!

Special thanks to Amber cause she can paint an engine

Tonyyank · 02-18-2003, 12:55 PM

Heres the 3-gauge pod install

EDIT: The voltmeter will be coming out, soon as i get a tranny sender

And the Voltmeter will be going in the cubby like Guru and seth have it

Amber99ga · 02-18-2003, 12:55 PM

Painting em is easy..

hmm....now if only my car had the same engine....but mine is still perty even though its whimpy

ArcticGT · 02-18-2003, 01:01 PM

Everything looks good Tony, especially the engine painting

What is jamstraights???wtf

Tonyyank · 02-18-2003, 01:03 PM

Quote:

Originally posted by ArcticGT
Everything looks good Tony, especially the engine painting

What is jamstraights???wtf

yeah figured you'd say that

its a LED for the brake lights

ArcticGT · 02-18-2003, 01:09 PM

Quote:

Originally posted by Tonyyank
yeah figured you'd say that

its a LED for the brake lights

Thats why I said it

What are you going to make the cubby out off? I was considering doing that as well, but I was thinking of buying the rear passenger seat panel that bodies up to the side and cutting it from that to make the whole thing uniform. Just curious.

AMRAAM4 · 02-18-2003, 01:50 PM

Quote:

Originally posted by Amber99ga

hmm....now if only my car had the same engine....but mine is still perty even though its whimpy

Doesn't someone have a SC sitting in their closet?

Tonyyank · 02-18-2003, 01:58 PM

Quote:

Originally posted by AMRAAM4
Doesn't someone have a SC sitting in their closet?

yeah...think shes gonna sell it now

Tonyyank · 02-18-2003, 02:00 PM

Quote:

Originally posted by ArcticGT
Thats why I said it

What are you going to make the cubby out off? I was considering doing that as well, but I was thinking of buying the rear passenger seat panel that bodies up to the side and cutting it from that to make the whole thing uniform. Just curious.

Im gonna get a pattern from the all high and mighty

Then use some sorte plastic and then paint it yeller

cavingman · 02-18-2003, 02:12 PM

oil pressure looks a lil low

Funny thing, we started the car after installing the oil press gauge and it shot to 100. turned the car off, back on, and it was at 40

anyways, that was fun! need to have mod days more often

ps. tony. that golf in the second pic. gank that spoiler for me

Tonyyank · 02-18-2003, 02:15 PM

Quote:

Originally posted by cavingman
oil pressure looks a lil low
Funny thing, we started the car after installing the oil press gauge and it shot to 100. turned the car off, back on, and it was at 40
anyways, that was fun! need to have mod days more often

ps. tony. that golf in the second pic. gank that spoiler for me

hehe...thats a volvo wtf

Amber99ga · 02-18-2003, 02:18 PM

Quote:

Originally posted by AMRAAM4
Doesn't someone have a SC sitting in their closet?

yeah yeah I know.....

athomas · 02-18-2003, 02:21 PM

Tony..... when Amber painted the manifold did you pull it off or did she paint it while it was installed on the car?

Amber99ga · 02-18-2003, 02:23 PM

while it was on the car..too chicken to take it off for fear we would mess somethin up

cavingman · 02-18-2003, 02:23 PM

Quote:

Originally posted by Tonyyank
hehe...thats a volvo wtf

looks like a golf. must be like alero's to grand ams or something, hehe
adam she painted it with it on. pimp job i must say

ArcticGT · 02-18-2003, 02:24 PM

Quote:

Originally posted by Amber99ga
while it was on the car..too chicken to take it off for fear we would mess somethin up

So obvious the next question is did Tony take pictures of you painting the manifold? Jk

Just joking Tony, but post them if you got them

Amber99ga · 02-18-2003, 02:25 PM

NOPE sorry...missed out on that one

Tonyyank · 02-18-2003, 02:25 PM

Quote:

Originally posted by ArcticGT
So obvious the next question is did Tony take pictures of you painting the manifold? Jk

Nope...saved those for later

But adam...for the first part she sat in there and painted it...

Then she just, leaned over to finish it

Do I have the best girl or what ??

mfuller · 02-18-2003, 02:44 PM

Quote:

Originally posted by Tonyyank
Then she just, leaned over to finish it

Geez, Tony....yer killin' me......

Looks good, though.

Tonyyank · 02-18-2003, 02:46 PM

Quote:

Originally posted by mfuller
Geez, Tony....yer killin' me......

Looks good, though.

haha..whys that Matt ??

02-18-2003, 12:53 PM	#1
Tonyyank Administrator AKA: Anthony Join Date: Aug 2002 Location: Parma, MI Age: 40 Posts: 3,470 Vehicle: 09 Silverado 4x4	Busy Sat. (3 gauge pod and engine painting for me :D ) Well this weekend Brenden, Amber and I wanted to get our cars just a lil better then they already were Ambers car got - Jamstraights moded and installed, Neon wires fixed, and misc fuses replaced Brenden's car got - Rewired ground for interior light mod, Installed Tranny sender and wired up Trans temp gauge. Tony's car got - Jamstraights moded and installed, engine painted, Installed 3 gauge pod, A/F ratio gauge, Oil pressure sender and gauge, and cleaned air filter Oh yeah and Amber decided it would be funny to pick off my front inlay cause it was missing the "I" Thanks to Amber, Brenden, Seth, and Jeremy for all your help!! Special thanks to Amber cause she can paint an engine Attached Thumbnails

02-18-2003, 12:55 PM	#2
Tonyyank Administrator AKA: Anthony Join Date: Aug 2002 Location: Parma, MI Age: 40 Posts: 3,470 Vehicle: 09 Silverado 4x4	Heres the 3-gauge pod install EDIT: The voltmeter will be coming out, soon as i get a tranny sender And the Voltmeter will be going in the cubby like Guru and seth have it Attached Thumbnails Last edited by Tonyyank; 02-18-2003 at 12:59 PM.

02-18-2003, 01:01 PM	#4
ArcticGT 6-Speeds of Fun AKA: Ryan Join Date: Aug 2002 Location: Livonia, MI Age: 40 Posts: 631 Vehicle: '04 RSX Type S A-Spec	Everything looks good Tony, especially the engine painting What is jamstraights???wtf __________________ '04 Acura RSX Type S A-Spec

02-18-2003, 02:12 PM	#10
cavingman Moderator AKA: Brendan Join Date: Aug 2002 Location: Philadelphia, PA Age: 40 Posts: 3,772 Vehicle: 04 Saturn Ion Redline	oil pressure looks a lil low Funny thing, we started the car after installing the oil press gauge and it shot to 100. turned the car off, back on, and it was at 40 anyways, that was fun! need to have mod days more often ps. tony. that golf in the second pic. gank that spoiler for me __________________ bleeehh....

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-18-2003, 12:55 PM	#3
Amber99ga Vet Tech's FTW! AKA: Amber Join Date: Aug 2002 Location: Parma, MI Age: 39 Posts: 571 Vehicle: 2005 Chevy Trailblazer	Painting em is easy.. hmm....now if only my car had the same engine....but mine is still perty even though its whimpy

02-18-2003, 02:21 PM	#13
athomas GAGT - Member AKA: Adam Join Date: Aug 2002 Location: Lake Orion MI Age: 41 Posts: 711 Vehicle: 2004 Pontiac GTO	Tony..... when Amber painted the manifold did you pull it off or did she paint it while it was installed on the car?

02-18-2003, 02:23 PM	#14
Amber99ga Vet Tech's FTW! AKA: Amber Join Date: Aug 2002 Location: Parma, MI Age: 39 Posts: 571 Vehicle: 2005 Chevy Trailblazer	while it was on the car..too chicken to take it off for fear we would mess somethin up

02-18-2003, 02:25 PM	#17
Amber99ga Vet Tech's FTW! AKA: Amber Join Date: Aug 2002 Location: Parma, MI Age: 39 Posts: 571 Vehicle: 2005 Chevy Trailblazer	NOPE sorry...missed out on that one