my set up - Page 2

thormxkid · 04-14-2009, 09:34 PM

easy way would be to keep the key if thats the case just slice into the yellow and red and black wire and it'll turn over....but only when you have your key turned to the second postion...

aiixon · 04-15-2009, 05:20 PM

do you think you could tell me how to do it without a key, or did you use a kit or something?

thormxkid · 04-15-2009, 09:34 PM

Quote:

Originally Posted by aiixon

do you think you could tell me how to do it without a key, or did you use a kit or something?

i could but it's alot of typing

....

and it's alot of wiring...

you'll need a bunch of relays

switches

and the button it's self....

i had a thread for this but there were so many chrip shows that it got locked up

PhantomLover007 · 04-15-2009, 09:50 PM

Do up a how to and post it.

aiixon · 04-15-2009, 11:30 PM

Is it something I could pay you to do for me and send it, or is it something you have to do inside your car??

thormxkid · 04-16-2009, 08:14 AM

it somethin you'll have to do in the car...

aiixon · 04-16-2009, 07:50 PM

So how much did you spend on it total.

bouji1 · 04-16-2009, 09:36 PM

Quote:

Originally Posted by thormxkid

just thought i post some pics of the stereo

bro i like your switches for heat and ac. do they light up? also where did you get push button ignition?

thormxkid · 04-16-2009, 09:40 PM

cavalier knobs removed the cover....

i spent about 120 on everything to do it maybe a lil more to do the push button

aiixon · 04-16-2009, 11:47 PM

well PLEASE do a how-to!!! you're the only person I've seen do this and I wanna be super r!cey tooo!!!!!!!!! screw using a key!! haha this will be awesome, just share the knowledge brehhhh

thormxkid · 04-17-2009, 11:09 PM

ordered some raamat and started installing it today...

here's what i got done for about hour and a halfs worth...

thormxkid · 04-17-2009, 11:11 PM

i thought you's would like this to....

it's a buddy's of mines...

sunfire with a 3400 swap

CantBeatIt96 · 04-17-2009, 11:26 PM

when hookin up the push button start, the yellow wire is the ignition wire the red wire is the wire leading to the starter cylinoid and the black wire is ground how exactly did u wire them in. i have the push button start but i can get the car to stay running, i only tapped the ignition wire i know its wrong it was kinda a sper of the moment thing. would i need to put the ignition wire on a switch and then put the starter cylinoid wire on one side and the ignition wire on the other then it should run right. i shouldnt need a key then too. only sucks when someone breaks into your car and doesnt need the key to start it. i dont care what the hell are they goin to get, nothing but a problem car, unless you have the time to work on it and if they steel it they dont want to do work to it.

.

CantBeatIt96 · 04-17-2009, 11:28 PM

my buddy and i are doin the 3.4 swap in his 97 GAGT cant wait for it to be done should be this comming tuesday should be in and running. the port difference is so much better in the 3.4L then the 3.1. i never new it was that much of a difference.

. im used to my 2.4L

thormxkid · 04-18-2009, 05:29 PM

day 2....

thormxkid · 04-18-2009, 05:30 PM

mid bass is very impressive now...

aiixon · 04-18-2009, 08:05 PM

thats really clean and you definitely did a very thorough job.. nice work

thormxkid · 04-18-2009, 09:18 PM

Quote:

Originally Posted by aiixon

thats really clean and you definitely did a very thorough job.. nice work

thanks deffinty glad i took the time too do it...

huge increase in mid bass now that the door is sealed...

very time consuming and my arms are now cut up to s**t trying to get in behind everything....hoping to get the other door done tommorrow and get started on sum of th trunk.

PhantomLover007 · 04-19-2009, 08:15 AM

Quote:

Originally Posted by thormxkid

i thought you's would like this to....

it's a buddy's of mines...

sunfire with a 3400 swap

The Sunfire looks pretty nice. The kit looks clean.

Hey Hart. You're gonna have fun trying to get to the window when something goes wrong w/ either the clips or anything else back there.

thormxkid · 04-19-2009, 08:30 AM

Quote:

Originally Posted by PhantomLover007

The Sunfire looks pretty nice. The kit looks clean.

Hey Hart. You're gonna have fun trying to get to the window when something goes wrong w/ either the clips or anything else back there.

yea i know this

but hopeful nothin goes wrong

04-17-2009, 11:09 PM	#31
thormxkid GAGT - Member AKA: HART Join Date: Jan 2007 Location: ontario Age: 36 Posts: 441 Vehicle: 2003 grand am gt 4dr.	ordered some raamat and started installing it today... here's what i got done for about hour and a halfs worth... Last edited by thormxkid; 05-14-2009 at 11:45 AM.

04-17-2009, 11:11 PM	#32
thormxkid GAGT - Member AKA: HART Join Date: Jan 2007 Location: ontario Age: 36 Posts: 441 Vehicle: 2003 grand am gt 4dr.	i thought you's would like this to.... it's a buddy's of mines... sunfire with a 3400 swap Last edited by thormxkid; 05-14-2009 at 11:45 AM.

04-18-2009, 05:29 PM	#35
thormxkid GAGT - Member AKA: HART Join Date: Jan 2007 Location: ontario Age: 36 Posts: 441 Vehicle: 2003 grand am gt 4dr.	day 2.... Last edited by thormxkid; 05-14-2009 at 11:45 AM.

04-18-2009, 05:30 PM	#36
thormxkid GAGT - Member AKA: HART Join Date: Jan 2007 Location: ontario Age: 36 Posts: 441 Vehicle: 2003 grand am gt 4dr.	mid bass is very impressive now... Last edited by thormxkid; 05-14-2009 at 11:45 AM.

04-14-2009, 09:34 PM	#21
thormxkid GAGT - Member AKA: HART Join Date: Jan 2007 Location: ontario Age: 36 Posts: 441 Vehicle: 2003 grand am gt 4dr.	easy way would be to keep the key if thats the case just slice into the yellow and red and black wire and it'll turn over....but only when you have your key turned to the second postion...

04-15-2009, 05:20 PM	#22
aiixon got ma permit! AKA: Steffan Join Date: Mar 2009 Location: 907 Age: 29 Posts: 830 Vehicle: 2000 GT Sedan	do you think you could tell me how to do it without a key, or did you use a kit or something?

04-15-2009, 11:30 PM	#25
aiixon got ma permit! AKA: Steffan Join Date: Mar 2009 Location: 907 Age: 29 Posts: 830 Vehicle: 2000 GT Sedan	Is it something I could pay you to do for me and send it, or is it something you have to do inside your car??

04-16-2009, 08:14 AM	#26
thormxkid GAGT - Member AKA: HART Join Date: Jan 2007 Location: ontario Age: 36 Posts: 441 Vehicle: 2003 grand am gt 4dr.	it somethin you'll have to do in the car...

04-16-2009, 07:50 PM	#27
aiixon got ma permit! AKA: Steffan Join Date: Mar 2009 Location: 907 Age: 29 Posts: 830 Vehicle: 2000 GT Sedan	So how much did you spend on it total.

04-16-2009, 09:40 PM	#29
thormxkid GAGT - Member AKA: HART Join Date: Jan 2007 Location: ontario Age: 36 Posts: 441 Vehicle: 2003 grand am gt 4dr.	cavalier knobs removed the cover.... i spent about 120 on everything to do it maybe a lil more to do the push button

04-16-2009, 11:47 PM	#30
aiixon got ma permit! AKA: Steffan Join Date: Mar 2009 Location: 907 Age: 29 Posts: 830 Vehicle: 2000 GT Sedan	well PLEASE do a how-to!!! you're the only person I've seen do this and I wanna be super r!cey tooo!!!!!!!!! screw using a key!! haha this will be awesome, just share the knowledge brehhhh

04-17-2009, 11:26 PM	#33
CantBeatIt96 I like Men AKA: Zak Join Date: Jun 2008 Location: hanvoer, PA Age: 32 Posts: 484 Vehicle: 1996 Grand Am 5 speed	when hookin up the push button start, the yellow wire is the ignition wire the red wire is the wire leading to the starter cylinoid and the black wire is ground how exactly did u wire them in. i have the push button start but i can get the car to stay running, i only tapped the ignition wire i know its wrong it was kinda a sper of the moment thing. would i need to put the ignition wire on a switch and then put the starter cylinoid wire on one side and the ignition wire on the other then it should run right. i shouldnt need a key then too. only sucks when someone breaks into your car and doesnt need the key to start it. i dont care what the hell are they goin to get, nothing but a problem car, unless you have the time to work on it and if they steel it they dont want to do work to it. .

04-17-2009, 11:28 PM	#34
CantBeatIt96 I like Men AKA: Zak Join Date: Jun 2008 Location: hanvoer, PA Age: 32 Posts: 484 Vehicle: 1996 Grand Am 5 speed	my buddy and i are doin the 3.4 swap in his 97 GAGT cant wait for it to be done should be this comming tuesday should be in and running. the port difference is so much better in the 3.4L then the 3.1. i never new it was that much of a difference. . im used to my 2.4L

04-18-2009, 08:05 PM	#37
aiixon got ma permit! AKA: Steffan Join Date: Mar 2009 Location: 907 Age: 29 Posts: 830 Vehicle: 2000 GT Sedan	thats really clean and you definitely did a very thorough job.. nice work