FS: HID kit for fogs - Page 2

lone_wolf025 · 04-30-2009, 08:26 PM

As much as I like the free bumps I'd rather not see this thread turn into a debate on HIDs as we have other venues for it...

Sean · 04-30-2009, 09:08 PM

At least we can conclude that this is a 35W kit, so potential buyers will not be left guessing

lone_wolf025 · 04-30-2009, 09:24 PM

Quote:

Originally Posted by Sean

At least we can conclude that this is a 35W kit, so potential buyers will not be left guessing

Hopefully people will read past the first post of melting housings to figure that out... But yea that's also why I'm not jumping down anyone's throat about posting here. Now if someone will just buy them I'd be happy.

2000 GT Coupe · 04-30-2009, 10:46 PM

Quote:

Originally Posted by lone_wolf025

Hopefully people will read past the first post of melting housings to figure that out... But yea that's also why I'm not jumping down anyone's throat about posting here. Now if someone will just buy them I'd be happy.

I would like to,they would go very well with my headlights, but its not the right time yet.

lone_wolf025 · 05-01-2009, 08:48 PM

Quote:

Originally Posted by 2000 GT Coupe

I would like to,they would go very well with my headlights, but its not the right time yet.

I doubt they're going anywhere fast as this thread has shown little to no interest. If you're concerned about the price PM me a reasonable offer. They're sitting around in a box just waiting for someone to grab them so its not like its an immediate concern right now.

2000 GT Coupe · 05-01-2009, 11:19 PM

the price is a concern but only to the extent that I have spent money like a drunken sailor since buying this car, I like what I got to show for it but I need to make sure I dont spend myself into a big hole, I think if you have them in a few weeks to a month I will take them off your hands.

lone_wolf025 · 05-01-2009, 11:57 PM

Ahh gotcha. Well if no one buys them in the next two weeks they'll be around for a good while. In just over two weeks I head off to boot camp and will be out of contact for the next 3 months or so. If you happen to decide during that time you want them I'd be happy to sell them to you, but you'd have to wait til August before I could do anything about it.

2000 GT Coupe · 05-03-2009, 12:55 AM

Quote:

Originally Posted by lone_wolf025

Ahh gotcha. Well if no one buys them in the next two weeks they'll be around for a good while. In just over two weeks I head off to boot camp and will be out of contact for the next 3 months or so. If you happen to decide during that time you want them I'd be happy to sell them to you, but you'd have to wait til August before I could do anything about it.

OK I will keep that in mind.

04GrandAM SC/T · 05-13-2009, 09:19 AM

Thanks Jon, cant wait to get these installed!

lone_wolf025 · 05-13-2009, 10:08 AM

Quote:

Originally Posted by 04GrandAM SC/T

Thanks Jon, cant wait to get these installed!

Shouldn't take ya too long to install em. Might be a good idea to run a little wire brush over those prongs that slip into the female end of the plug from the car, just to ensure a good contact. They looked fine when I was checked them before you got them, but it won't hurt to mess with it a little.

04GrandAM SC/T · 05-13-2009, 10:36 AM

yeah i was thinking about that on the way back home. Just a question, you have the two connectors that plug into the bulb from the ballast, and then you have that main power source wire to power the ballast, where does that one end connect into? Ill take pics if you are confused

lone_wolf025 · 05-13-2009, 11:55 AM

Quote:

Originally Posted by 04GrandAM SC/T

yeah i was thinking about that on the way back home. Just a question, you have the two connectors that plug into the bulb from the ballast, and then you have that main power source wire to power the ballast, where does that one end connect into? Ill take pics if you are confused

There should be another plug in there somewhere. The fat plug from the ballast plugs into another plug coming from the bulb. The only thing that goes to the car is just those two prongs. So from the bulb there should be 3 cords. Two little one fat as I recall.

If that doesn't help take the pic and post it to clear it up.

04GrandAM SC/T · 05-13-2009, 12:19 PM

ok i went through and connected it all and it pretty much cleared things up. only question is where do those two little prongs connect into?

lone_wolf025 · 05-13-2009, 03:08 PM

The prongs go into the plug coming from the car for the fog lights. The plug that you took off from the lights is the one that the prongs go into. THAT is the one you should put a plastic bag around and tape off the ends on in order to seal it from the elements.

04GrandAM SC/T · 05-13-2009, 05:26 PM

Got it now. Working on it tonight. Ill let you know how it turns out.

04-30-2009, 09:08 PM	#22
Sean GAGT - Member AKA: Sean Join Date: Sep 2007 Location: MA Age: 30 Posts: 240 Vehicle: 2000 GA GT-1 Coupe	At least we can conclude that this is a 35W kit, so potential buyers will not be left guessing __________________ 2000 Grand Am GT-1

05-01-2009, 11:19 PM	#26
2000 GT Coupe Made the move :D AKA: Gene Join Date: Jan 2009 Location: Jax Florida Posts: 1,416 Vehicle: 00 Grand Am GT1 Coupe	the price is a concern but only to the extent that I have spent money like a drunken sailor since buying this car, I like what I got to show for it but I need to make sure I dont spend myself into a big hole, I think if you have them in a few weeks to a month I will take them off your hands. __________________ 2000 Grand Am GT1 Camaro brake upgrade Goodridge G-Stop SS brake lines MP Racing CAI and tuned PCM LED tails Projector's with HID's Lowered 18" Rims Aftermarket front and rear anti-sway bars

05-13-2009, 05:26 PM	#35
04GrandAM SC/T Boosted AKA: Mark Join Date: Mar 2008 Location: WI Posts: 277 Vehicle: 08 CSRT-4	Got it now. Working on it tonight. Ill let you know how it turns out. __________________ 2008 Caliber SRT-4 20% tint AEM Intake Mopar Blow off Plate Turbo XS Boost Controller Mopar Stage 1 AEM Wideband AEM Boost Gauge AEM Trans Temp gauge AEM Oil Pressure guage Massive Performance Wastegate Massive Performance tune BWoody Cat-Back DCR Downpipe Soon to come: Real Tune Stage 2 turbo upgrade = 430hp ChicagolandSRTClub WISRT

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-13-2009, 09:19 AM	#29
04GrandAM SC/T Boosted AKA: Mark Join Date: Mar 2008 Location: WI Posts: 277 Vehicle: 08 CSRT-4	Thanks Jon, cant wait to get these installed!

05-13-2009, 10:36 AM	#31
04GrandAM SC/T Boosted AKA: Mark Join Date: Mar 2008 Location: WI Posts: 277 Vehicle: 08 CSRT-4	yeah i was thinking about that on the way back home. Just a question, you have the two connectors that plug into the bulb from the ballast, and then you have that main power source wire to power the ballast, where does that one end connect into? Ill take pics if you are confused

05-13-2009, 12:19 PM	#33
04GrandAM SC/T Boosted AKA: Mark Join Date: Mar 2008 Location: WI Posts: 277 Vehicle: 08 CSRT-4	ok i went through and connected it all and it pretty much cleared things up. only question is where do those two little prongs connect into?