My GT aka Wesley Snipes

[RPO3]

Originally Posted by [ChaosweaveR]

GT's looking good. I say it's time to go SC/T.

I was thinking about it, might be a next year thing if i don't end up bagging.

[Exodus]

Ride looks good... The side wall of your wheels are so thin, looks like you're riding on rim> a tad too much but clean ride over all...

[chuckclose1]

sh*t i like the rims!!!!
im so tired of seeing the same old star patterned rims on cars.
i like to be different myself.

your ride looks really clean and nice man. if thats your DD i personally would not bag it, but thats my openion.

keep us posted on future mods and updates

[PhantomLover007]

Originally Posted by RPO3

I believe you, but I am going to have to go through trial and error on this one because i already bought them. So i will try them out, let them live their short life span, and then paint haha.

Sounds like me...

[RPO3]

Originally Posted by chuckclose1

sh*t i like the rims!!!!
im so tired of seeing the same old star patterned rims on cars.
i like to be different myself.

your ride looks really clean and nice man. if thats your DD i personally would not bag it, but thats my openion.

keep us posted on future mods and updates

Yea thats what i was thinking...
Maybe a daily will come along, if not, shaving, more interior and engine work will
be done over winter

[Hodge]

those rims are ****in sick.. nice ride

[H.O. Driver]

Originally Posted by RPO3

Yeaaa, deff not wanting that $80 fix it ticket. My back 3 windows are 3% and with a
black car it would be screaming "Pull me over" My whole thing is when its hott i ride
with my two fronts down anyways so you dont even see the windows. If it was legal
here i would do it but just not worth it to me. Backs are dark enough to make the
fronts look dark...

I never got hassled for my tint in Saginaw, just in Midland, and only when it was 2am and they thought I was leaving the bar and drinking or something. I have 20% now and have only been stopped for it once in the 2 years I have had it. I don't even roll my windows down when I see a cop anymore. The last time I got stopped I was pulling out of my driveway up here and he told me its illegal and I told him I know. He told me I will get harassed for it and I told him to look at run my record and he said have a nice day.

If you drive with your windows down a lot in the front I wouldn't worry about. Unless you have a cop in your lanes of traffic I would worry, its to busy down there to have cops whip u-turns and pull ******* moves to come get you.

I would put 20% on your front windows, it won't look two different shades or funny. This is what my 20% tint job on my car looks like, and I have only been stopped once in two years in a area where all the cops are bored.

[RPO3]

Thanks for the advice^^^
Your GT looks awesome btw.

Was @ the 2nd Annual Mid-Michigan Custom Car Show Sunday. Here are a few shots...

[H.O. Driver]

I want those projectors but I am not sure if it will be worth it or not. I like the looks of them but just not sure if the aiming and light output of them will be worth it or not. I think a set of Eibach springs would lower your car just enough to make it sit right, no wheel well gap and no rubbing.

Thanks for the compliment man, your car looks awesome too. I just need to get some cash flow again so I can finish the motor on mine, and the trans....

[tipnitty]

the car looks very good but those wheels are just too "hoodrich" for me

[RPO3]

Originally Posted by H.O. Driver

I want those projectors but I am not sure if it will be worth it or not. I like the looks of them but just not sure if the aiming and light output of them will be worth it or not. I think a set of Eibach springs would lower your car just enough to make it sit right, no wheel well gap and no rubbing.

Thanks for the compliment man, your car looks awesome too. I just need to get some cash flow again so I can finish the motor on mine, and the trans....

Yea im sure you've seen the thread on the projectors. I got HID's but honestly the work you have to put into them and the stock light output just isnt worth it. I love
mine now dont get me wrong. It was just a looong road to get there.

And Eibach springs will really lower the car with no rub?

[K WeRd]

eibachs wont lower it that much to rub. you should be fine with eibachs.

[[ChaosweaveR]]

Originally Posted by H.O. Driver

I want those projectors but I am not sure if it will be worth it or not. I like the looks of them but just not sure if the aiming and light output of them will be worth it or not. I think a set of Eibach springs would lower your car just enough to make it sit right, no wheel well gap and no rubbing.

Thanks for the compliment man, your car looks awesome too. I just need to get some cash flow again so I can finish the motor on mine, and the trans....

Please, no projectors. Normal black housings FTW! Killer coupe BTW. I just might now get the hood and just the SC/T lip kit. Looks hot with the normal hood and everything else SC/T!

[H.O. Driver]

Originally Posted by [ChaosweaveR]

Please, no projectors. Normal black housings FTW! Killer coupe BTW. I just might now get the hood and just the SC/T lip kit. Looks hot with the normal hood and everything else SC/T!

Yea, I think I am just going to HID the housings I have now, black with the clear corner. I like the led turn signals and the halo's but I don't do that well with fiberglassing and cutting up of things.


Yea, Ebiach's are a 1.4" drop in the front and a 1.6" in the rear. I run a 245/40/18 tire with no rubbing, so compare that to your tire size on the tire size calculator and see if it fits. Mine are about a 1/4 inch from rubbing but haven't rubbed them at all.

[[ChaosweaveR]]

Originally Posted by H.O. Driver

Yea, I think I am just going to HID the housings I have now, black with the clear corner. I like the led turn signals and the halo's but I don't do that well with fiberglassing and cutting up of things.

Stick with what ya got. I have 6K HIDs with the same headlights you have, and I see fine. IMO, we have the best looking headlight out there for the fifth gen GA.

[RPO3]

Originally Posted by H.O. Driver

Yea, I think I am just going to HID the housings I have now, black with the clear corner. I like the led turn signals and the halo's but I don't do that well with fiberglassing and cutting up of things.


Yea, Ebiach's are a 1.4" drop in the front and a 1.6" in the rear. I run a 245/40/18 tire with no rubbing, so compare that to your tire size on the tire size calculator and see if it fits. Mine are about a 1/4 inch from rubbing but haven't rubbed them at all.

Anyone have a link to those springs???
Sorry i havent posted in a while. Busy
with work and car shows got a couple pics from Custom Rides For Saving Lives
Sat June 20th

[[ChaosweaveR]]

Holy crap! Looks like you have dog-dish hubcaps with whitewalls! How'd you do in that show?

[RPO3]

This GA beat me for a trophy. But hes lives here in Sag so as long as
one of us brought one home haha

[SikMindz]

Holy whack.

[H.O. Driver]

Wow yours is much cleaner looking than that one. The springs are on pfyc.com and a few other places, just look for Eibach Lowering Springs on the web. They are around $250 for the set. You will love the look of it after those springs.

If you don't get to shaving the locks, order some smooth locks till then, it makes a big difference for how cheap and simple they are.