GI : Full Part Out

Jake · 07-30-2009, 12:34 PM

Pics here.
Zomg Teh New Pichures!

This is only gauging interest. If I get serious interest in most of the items I will part it out. If not, I won't part out only like 1/2 the car. I will need a stock exhaust if someone is interested in my flowmaster 80 and tips.

I'm sure there is more I will add slowly. Don't ask anything about audio that is all being sold to my buddy.

Engine Stuff (I WILL NEED ALL STOCK PIECES FIRST!!!!!!!)
S&S Headers with HF cat 500 + Shipping + your stuff in return.
FDP 62mm TB + FDP P&P UIM (I'D PREFER THESE 2 ITEMS TO BE SOLD AS ONE) 175 + shipping + your items in return.
FLowmaster 80 with dual slanted tips (LOCAL ONLY!!!!!) 100$ + stock exhaust
MPRacing tuned PCM for the above mods + catback exhaust. 50 bucks + shipping

Interior Stuff
Leather front seats. Near perfect condition. 200 + shipping
2 Gauge Pillar (WILL NEED STOCK PILLAR!!!!!)
Autometer A/F Ratio Gauge + Pigtail - 60 bucks shipped

Exterior Stuff
SC/t Hood with grill inserts. (LOCAL ONLY!!!!!) 500$+ Stock hood.
SC/T spoiler (WILL NEED STOCK SPOILER!!!) 115$ + shipping + your stock spoiler in return.
SSC Lowering springs - 115$ + shipping

Prices will be added later when a few people start to show interest and or make offers.

Jake · 07-30-2009, 12:35 PM

Pics of engine can be seen here on page 3.

S&S Headers Drive By

notsoaveragej0e · 07-30-2009, 12:48 PM

finally throwin in the towel huh? Good luck with the part out, at least you should be able to get some $$ outta it before selling. Any idea of what is next?

PS- what are "decked heads"

Jake · 07-30-2009, 12:55 PM

Quote:

Originally Posted by notsoaveragej0e

finally throwin in the towel huh? Good luck with the part out, at least you should be able to get some $$ outta it before selling. Any idea of what is next?

PS- what are "decked heads"

Yea, it has served me well. I think I should be able to get a decent amount out ot a part out + sellin it, only has 55k miles on it. I am leaning towards a fusion. 06-07. Just the heads Mark @ Mpracing sells

.

speedfreak1 · 07-30-2009, 01:11 PM

interested in the PCM. would you need my stock one first?

DrFabulous · 07-30-2009, 01:19 PM

Perhaps interested in leather seats, let me know what you would want for them. Also, if you're taking the grills out, I may need to top part by the arrowhead, if they are the same as my lower grill (I somehow managed to lose one of the pieces

)

Grandamgtblk99 · 07-30-2009, 02:01 PM

Price for headers?

burgett2103 · 07-30-2009, 02:19 PM

might be interested in headers.. color of seats?

Hotrod6 · 07-30-2009, 03:24 PM

Id be interested in the spoiler and i have a white stocker..

SilverGAGT2002 · 07-30-2009, 04:21 PM

I may be interested in the UIM depending on price

OneFstGt · 07-30-2009, 04:37 PM

How much for the 2 Gauge Pillar?
And yes i have a stock one ready to ship.

Jake · 07-30-2009, 05:23 PM

Quote:

Originally Posted by speedfreak1

interested in the PCM. would you need my stock one first?

No sir.

Quote:

Originally Posted by DrFabulous

Perhaps interested in leather seats, let me know what you would want for them. Also, if you're taking the grills out, I may need to top part by the arrowhead, if they are the same as my lower grill (I somehow managed to lose one of the pieces

)

You mean the bumper grills?

Seats will prolly be like 200 + shipping.

Quote:

Originally Posted by Grandamgtblk99

Price for headers?

EDIT : Probably 500 + shipping.

Quote:

Originally Posted by burgett2103

might be interested in headers.. color of seats?

Gray, interior is grey

Quote:

Originally Posted by SilverGAGT2002

I may be interested in the UIM depending on price

I'd like the TB and UIM to go as one piece.

Jake · 07-30-2009, 05:24 PM

Quote:

Originally Posted by OneFstGt

How much for the 2 Gauge Pillar?
And yes i have a stock one ready to ship.

Just the pillar? Check the price from pfyc, I am a lil busy atm, and it will be a lil less than that.

SilverGAGT2002 · 07-30-2009, 05:41 PM

Well how much for both?

Jake · 07-30-2009, 06:04 PM

Quote:

Originally Posted by SilverGAGT2002

Well how much for both?

175 + shipping + both your pieces in return.

speedfreak1 · 07-30-2009, 06:06 PM

price on the PCM shipped to canada?

Jake · 07-30-2009, 06:08 PM

Quote:

Originally Posted by speedfreak1

price on the PCM shipped to canada?

As of now I could say it would probably be like 40 bucks + shipping.

speedfreak1 · 07-30-2009, 06:14 PM

what does it all have on it?

Jake · 07-30-2009, 06:15 PM

Quote:

Originally Posted by speedfreak1

what does it all have on it?

I says in my first post. Tuned for all my mods. + catback exhaust.

speedfreak1 · 07-30-2009, 06:17 PM

so no higher ****s, an no fans stay on after the engine is off? did you notice a differnce with it?

07-30-2009, 12:34 PM	#1
Jake BRAAAPPP AKA: Jake Join Date: Feb 2007 Location: Cen Cal Age: 34 Posts: 3,725 Vehicle: Hellcat Challenger	GI : Full Part Out Pics here. Zomg Teh New Pichures! This is only gauging interest. If I get serious interest in most of the items I will part it out. If not, I won't part out only like 1/2 the car. I will need a stock exhaust if someone is interested in my flowmaster 80 and tips. I'm sure there is more I will add slowly. Don't ask anything about audio that is all being sold to my buddy. Engine Stuff (I WILL NEED ALL STOCK PIECES FIRST!!!!!!!) S&S Headers with HF cat 500 + Shipping + your stuff in return. FDP 62mm TB + FDP P&P UIM (I'D PREFER THESE 2 ITEMS TO BE SOLD AS ONE) 175 + shipping + your items in return. FLowmaster 80 with dual slanted tips (LOCAL ONLY!!!!!) 100$ + stock exhaust MPRacing tuned PCM for the above mods + catback exhaust. 50 bucks + shipping Interior Stuff Leather front seats. Near perfect condition. 200 + shipping 2 Gauge Pillar (WILL NEED STOCK PILLAR!!!!!) Autometer A/F Ratio Gauge + Pigtail - 60 bucks shipped Exterior Stuff SC/t Hood with grill inserts. (LOCAL ONLY!!!!!) 500$+ Stock hood. SC/T spoiler (WILL NEED STOCK SPOILER!!!) 115$ + shipping + your stock spoiler in return. SSC Lowering springs - 115$ + shipping Prices will be added later when a few people start to show interest and or make offers. Last edited by Jake; 07-30-2009 at 08:41 PM.

07-30-2009, 12:48 PM	#3
notsoaveragej0e Causes a ruckus AKA: Joe Join Date: Jun 2004 Location: Detroit, MI Age: 34 Posts: 5,011 Vehicle: Maligoat	finally throwin in the towel huh? Good luck with the part out, at least you should be able to get some $$ outta it before selling. Any idea of what is next? PS- what are "decked heads" __________________

07-30-2009, 01:11 PM	#5
speedfreak1 GAGT - Member AKA: I am me Join Date: Sep 2007 Location: somewhere Posts: 513 Vehicle: Grand Am GT1	interested in the PCM. would you need my stock one first? __________________

07-30-2009, 01:19 PM	#6
DrFabulous FIGJAM AKA: Matt Join Date: Mar 2004 Location: MN Posts: 9,675 Vehicle: Acura\|Chevy\|Porsche	Perhaps interested in leather seats, let me know what you would want for them. Also, if you're taking the grills out, I may need to top part by the arrowhead, if they are the same as my lower grill (I somehow managed to lose one of the pieces ) __________________ '18 Acura MDX Kid hauler '15 Chevrolet Tahoe Toy Hauler '01 Porsche Boxster Project

07-30-2009, 02:01 PM	#7
Grandamgtblk99 Burgee AKA: Allen Join Date: Mar 2006 Location: Orange, Tx Age: 39 Posts: 787 Vehicle: 1999 Grand Am Gt	Price for headers? __________________ 1999 Sc/t turbo.

07-30-2009, 12:35 PM	#2
Jake BRAAAPPP AKA: Jake Join Date: Feb 2007 Location: Cen Cal Age: 34 Posts: 3,725 Vehicle: Hellcat Challenger	Pics of engine can be seen here on page 3. S&S Headers Drive By

07-30-2009, 02:19 PM	#8
burgett2103 Sounds for Dayzzz AKA: Nick Join Date: Dec 2008 Location: Tonica, IL Age: 30 Posts: 1,886 Vehicle: 03 GAGT/98 Chevy 1500	might be interested in headers.. color of seats?

07-30-2009, 03:24 PM	#9
Hotrod6 GAGT - Member AKA: Rodney Join Date: Mar 2007 Location: Ponca City,OK Age: 45 Posts: 557 Vehicle: 2001 GT	Id be interested in the spoiler and i have a white stocker..

07-30-2009, 04:21 PM	#10
SilverGAGT2002 GTslow AKA: David Join Date: Mar 2009 Location: Odessa, TX Age: 32 Posts: 1,136 Vehicle: 02 Grand Am GT Sedan	I may be interested in the UIM depending on price __________________ Nothing Coming soon!

07-30-2009, 04:37 PM	#11
OneFstGt Senior Member AKA: Kal-El Join Date: Oct 2007 Location: Ky Posts: 183 Vehicle: Ram Air 75th Anniv.	How much for the 2 Gauge Pillar? And yes i have a stock one ready to ship. __________________ You can't have everything....where would you put it?

07-30-2009, 05:41 PM	#14
SilverGAGT2002 GTslow AKA: David Join Date: Mar 2009 Location: Odessa, TX Age: 32 Posts: 1,136 Vehicle: 02 Grand Am GT Sedan	Well how much for both? __________________ Nothing Coming soon!

07-30-2009, 06:06 PM	#16
speedfreak1 GAGT - Member AKA: I am me Join Date: Sep 2007 Location: somewhere Posts: 513 Vehicle: Grand Am GT1	price on the PCM shipped to canada? __________________

07-30-2009, 06:14 PM	#18
speedfreak1 GAGT - Member AKA: I am me Join Date: Sep 2007 Location: somewhere Posts: 513 Vehicle: Grand Am GT1	what does it all have on it? __________________

07-30-2009, 06:17 PM	#20
speedfreak1 GAGT - Member AKA: I am me Join Date: Sep 2007 Location: somewhere Posts: 513 Vehicle: Grand Am GT1	so no higher ****s, an no fans stay on after the engine is off? did you notice a differnce with it? __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode