Looking to do something to the back - Page 2

martyf663 · 08-11-2009, 09:34 PM

Hahaha! I'm laughing more at the tree air freshener...LOL!

Quote:

Originally Posted by Doobydoo

also you can make the back look the best ever if you do this

^^ laugh :-d

Haughee · 08-11-2009, 09:57 PM

Dual Fart Cans on the rear. Adds at least 20 WHP

PhantomLover007 · 08-11-2009, 10:06 PM

The exhaust is welded to the suspension to stiffen it...

hotcarmaster12 · 08-12-2009, 06:40 PM

Quote:

Originally Posted by PhantomLover007

Tint all the lights, upgrade to LED's, or just back into a pole.

That would change it completely...

Or back into a bright red g6 like I did,

tiM · 08-19-2009, 08:50 PM

Alright. So I'm looking to get new exhaust tips but don't know where to start or what would fill those cut outs in the back. Can anybody lead me in the right direction?

BOOTMASTER · 08-19-2009, 09:16 PM

back, as into a pole....

then get the 32" rims, and make them fit no matter what

BOOTMASTER · 08-19-2009, 09:17 PM

check ebay for exhaust tips.... then find some on there you like and put em on. also, there was a post on here with an ebay link with CHEAP sc/t spoilers...

BOOTMASTER · 08-19-2009, 09:18 PM

Quote:

Originally Posted by Doobydoo

also you can make the back look the best ever if you do this

^^ laugh :-d

that is just wrong, and i see it daily! it makes me sad, though most go the extra step and ad push bars and side steps...

PhantomLover007 · 08-19-2009, 09:33 PM

Quote:

Originally Posted by tiM

Alright. So I'm looking to get new exhaust tips but don't know where to start or what would fill those cut outs in the back. Can anybody lead me in the right direction?

E-Bay or local exhaust shops for the tips.

As for the grills for the cut outs, CCG (CustomCarGrills.com)

burgett2103 · 08-19-2009, 10:21 PM

also try customgrandam.com they got grills for front end, plus the sc/t part grilles.

also, theres about 4 of them caprices rollin around my area on 24s... ugly as **** son.. i just wanna tell them NO

Hiier · 08-27-2009, 09:23 PM

RPO3-
where did you get those pictures?

aiixon · 08-27-2009, 09:35 PM

those are bigger than 24's they're like 30's..

RPO3 · 08-29-2009, 08:49 AM

Quote:

Originally Posted by Hiier

RPO3-
where did you get those pictures?

Google like a year and half back. Saved them on the PC

tiM · 10-01-2009, 05:14 PM

Just an update:

Got new tails. What you guys think?

tipnitty · 10-01-2009, 05:34 PM

not bad........matches well with the silver

PhantomLover007 · 10-01-2009, 07:09 PM

Ditto. Put a little tint on them though.

dand2392 · 10-08-2009, 11:58 AM

badass

oldschoolguy · 10-08-2009, 12:49 PM

Do NOT get chrome plated tips for 10 bucks each. I did that, and now they're completely rusted. the chrome stays shiny only until the sand kicked up by your tires takes it off, and then it rusts. Spend a little more and get stainless tips. Instead of spending twice, like I'm gonna end up doing

alocaurd · 10-08-2009, 02:09 PM

Quote:

Originally Posted by tipnitty

a huge aluminum wing with euro tail light and single exhaust when u have 2 exhaust cut outs

those are usually a favorite of mine

x2

10-01-2009, 05:14 PM	#34
tiM GAGT - Member AKA: Tim Join Date: Jan 2009 Location: New Jersey Age: 29 Posts: 54 Vehicle: 2005 Grand Am GT Coupe	Just an update: Got new tails. What you guys think? Attached Thumbnails

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-11-2009, 09:57 PM	#22
Haughee GAGT - Member AKA: Jordan Join Date: May 2008 Location: Edwardsburg, MI Posts: 146 Vehicle: 2010 Ford Taurus SEL	Dual Fart Cans on the rear. Adds at least 20 WHP

08-19-2009, 08:50 PM	#25
tiM GAGT - Member AKA: Tim Join Date: Jan 2009 Location: New Jersey Age: 29 Posts: 54 Vehicle: 2005 Grand Am GT Coupe	Alright. So I'm looking to get new exhaust tips but don't know where to start or what would fill those cut outs in the back. Can anybody lead me in the right direction?

08-19-2009, 09:16 PM	#26
BOOTMASTER i like JL AUDIO AKA: Bruce Join Date: Apr 2006 Location: Zion, IL Posts: 429 Vehicle: 2002 gt coupe	back, as into a pole.... then get the 32" rims, and make them fit no matter what

08-19-2009, 09:17 PM	#27
BOOTMASTER i like JL AUDIO AKA: Bruce Join Date: Apr 2006 Location: Zion, IL Posts: 429 Vehicle: 2002 gt coupe	check ebay for exhaust tips.... then find some on there you like and put em on. also, there was a post on here with an ebay link with CHEAP sc/t spoilers...

08-19-2009, 10:21 PM	#30
burgett2103 Sounds for Dayzzz AKA: Nick Join Date: Dec 2008 Location: Tonica, IL Age: 30 Posts: 1,886 Vehicle: 03 GAGT/98 Chevy 1500	also try customgrandam.com they got grills for front end, plus the sc/t part grilles. also, theres about 4 of them caprices rollin around my area on 24s... ugly as **** son.. i just wanna tell them NO

08-27-2009, 09:23 PM	#31
Hiier GAGT - Newbie AKA: Noah Join Date: Apr 2009 Location: KS Posts: 18 Vehicle: 2000 Grand Am GT Coupe	RPO3- where did you get those pictures?

08-27-2009, 09:35 PM	#32
aiixon got ma permit! AKA: Steffan Join Date: Mar 2009 Location: 907 Age: 29 Posts: 830 Vehicle: 2000 GT Sedan	those are bigger than 24's they're like 30's..

10-08-2009, 11:58 AM	#37
dand2392 porfessional thug AKA: dan Join Date: Mar 2009 Location: ?????? Posts: 393 Vehicle: 03 grand am gt	badass

10-08-2009, 12:49 PM	#38
oldschoolguy noob AKA: huh?? Join Date: Apr 2009 Location: BC Canada Posts: 510 Vehicle: '01 Grand Am	Do NOT get chrome plated tips for 10 bucks each. I did that, and now they're completely rusted. the chrome stays shiny only until the sand kicked up by your tires takes it off, and then it rusts. Spend a little more and get stainless tips. Instead of spending twice, like I'm gonna end up doing