3500 Engine Parts

twistedindy1 · 08-31-2009, 07:08 PM

I have a 3500 that was hydrolocked and was changed out. I have a pic below and mostly everything is there. Popped a piston out the bottom so I am guessing the heads up are still good since didn't come though there. Email or post if you are interested in any parts.

Engine was from a 2006 Pontiac G6 GT.

Here is the parts list for what is left....

Coil - 50
LIM - 75
UIM - 75
LIM and UIM as package - 125
Fuel Rail - 75
Flywheel - 30
Exhaust Manifolds, Pair - 75
Valve Covers, Pair - 35
Thermostat Housing - 25
Coolent Pipes - 45
Engine Block - 200
Crankshaft - 125

Pictures are thoughout the post.

Vegeta · 08-31-2009, 07:16 PM

How much for the heads if they aren't busted?

twistedindy1 · 08-31-2009, 07:22 PM

Quote:

Originally Posted by Vegeta

How much for the heads if they aren't busted?

We can pull them off tomorrow and check, but $125 shipped fair??

Vegeta · 08-31-2009, 07:25 PM

sounds good, let me know how they turn out

twistedindy1 · 09-03-2009, 06:46 PM

sorry for the delay, the motor will be taken apart tomorrow, Friday, and I will try and get some pics of the heads for you and we can go from there if you are still interested.

SilverGAGT2002 · 09-03-2009, 06:55 PM

I am interested in the heads and can you throw in the rocker arms aswell?

twistedindy1 · 09-03-2009, 07:01 PM

I can leave the rockers on there, that isn't an issue, no use for them really on my end...Ben I believe is first since he posted first, unless he wanted to just pass them on to you.

Vegeta · 09-03-2009, 07:04 PM

I am yielding to a customer on this one if he wants them

If not, yes I want them.

SilverGAGT2002 · 09-03-2009, 07:07 PM

Whoot! Let me know when the heads are ready to be shipped

im going to have you send them to ben instead of to me will be easier for us both

twistedindy1 · 09-03-2009, 07:07 PM

Alright, pics will be posted tomorrow if possible and then who ever can have them, Same price $125 shipped.

twistedindy1 · 09-03-2009, 07:10 PM

alright, they should be ready at latest by Monday Morning, I take paypal, you want the pushrods too??

Just put a note on paypal on what address to mail them too.

Marc

paypal is twistedindy1@excite.com

SilverGAGT2002 · 09-03-2009, 07:57 PM

Im gonna need the Lower intake manifold aswell if you could give me a price on that too

twistedindy1 · 09-03-2009, 08:01 PM

you need the upper as well, or just lower, I could do upper lower and heads for 250 shipped or just with the lower for $200 shipped.

SilverGAGT2002 · 09-03-2009, 08:03 PM

sounds good let me know when you got pics of the heads and the lim so i can send payment a.s.a.p

twistedindy1 · 09-03-2009, 08:05 PM

alright will do.

SilverGAGT2002 · 09-06-2009, 09:52 AM

any updates?

twistedindy1 · 09-06-2009, 01:58 PM

my friend, where the motor is, has been gone all weekend, but should only take an hour or so to pull apart, so tonight or tomorrow for sure,

SilverGAGT2002 · 09-06-2009, 03:43 PM

Alright man ill keep checking back just keep me updated i have money in my account ready to send t you once i see the condition of the parts

twistedindy1 · 09-08-2009, 06:55 AM

I am going to find time to get there and get pics of the heads and LIM.....I will post them later for you....

twistedindy1 · 09-08-2009, 03:24 PM

got the heads off and they look just fine, only one rod was broken and no tagging of any valves or anything like that, broke down.....

Here are some pics...let me know if you still want the stuff.

08-31-2009, 07:08 PM	#1
twistedindy1 GAGT - Member AKA: Marc Join Date: Jun 2003 Location: Cedar Rapids, IA Age: 41 Posts: 145 Vehicle: 2001 Grand Am GT Coupe	3500 Engine Parts I have a 3500 that was hydrolocked and was changed out. I have a pic below and mostly everything is there. Popped a piston out the bottom so I am guessing the heads up are still good since didn't come though there. Email or post if you are interested in any parts. Engine was from a 2006 Pontiac G6 GT. Here is the parts list for what is left.... Coil - 50 LIM - 75 UIM - 75 LIM and UIM as package - 125 Fuel Rail - 75 Flywheel - 30 Exhaust Manifolds, Pair - 75 Valve Covers, Pair - 35 Thermostat Housing - 25 Coolent Pipes - 45 Engine Block - 200 Crankshaft - 125 Pictures are thoughout the post. __________________ Marc Last edited by twistedindy1; 12-06-2009 at 06:57 AM.

08-31-2009, 07:16 PM	#2
Vegeta WOT-Tech AKA: Ben Join Date: Aug 2002 Location: Indiana Age: 42 Posts: 1,089 Vehicle: 1999 Alero	How much for the heads if they aren't busted? __________________ Ben Wide Open Throttle Technologies 60DegreeV6.com

08-31-2009, 07:25 PM	#4
Vegeta WOT-Tech AKA: Ben Join Date: Aug 2002 Location: Indiana Age: 42 Posts: 1,089 Vehicle: 1999 Alero	sounds good, let me know how they turn out __________________ Ben Wide Open Throttle Technologies 60DegreeV6.com

09-03-2009, 06:46 PM	#5
twistedindy1 GAGT - Member AKA: Marc Join Date: Jun 2003 Location: Cedar Rapids, IA Age: 41 Posts: 145 Vehicle: 2001 Grand Am GT Coupe	sorry for the delay, the motor will be taken apart tomorrow, Friday, and I will try and get some pics of the heads for you and we can go from there if you are still interested. __________________ Marc

09-03-2009, 06:55 PM	#6
SilverGAGT2002 GTslow AKA: David Join Date: Mar 2009 Location: Odessa, TX Age: 32 Posts: 1,136 Vehicle: 02 Grand Am GT Sedan	I am interested in the heads and can you throw in the rocker arms aswell? __________________ Nothing Coming soon!

09-03-2009, 07:01 PM	#7
twistedindy1 GAGT - Member AKA: Marc Join Date: Jun 2003 Location: Cedar Rapids, IA Age: 41 Posts: 145 Vehicle: 2001 Grand Am GT Coupe	I can leave the rockers on there, that isn't an issue, no use for them really on my end...Ben I believe is first since he posted first, unless he wanted to just pass them on to you. __________________ Marc

09-03-2009, 07:04 PM	#8
Vegeta WOT-Tech AKA: Ben Join Date: Aug 2002 Location: Indiana Age: 42 Posts: 1,089 Vehicle: 1999 Alero	I am yielding to a customer on this one if he wants them If not, yes I want them. __________________ Ben Wide Open Throttle Technologies 60DegreeV6.com

09-03-2009, 07:07 PM	#9
SilverGAGT2002 GTslow AKA: David Join Date: Mar 2009 Location: Odessa, TX Age: 32 Posts: 1,136 Vehicle: 02 Grand Am GT Sedan	Whoot! Let me know when the heads are ready to be shipped im going to have you send them to ben instead of to me will be easier for us both __________________ Nothing Coming soon!

09-03-2009, 07:10 PM	#11
twistedindy1 GAGT - Member AKA: Marc Join Date: Jun 2003 Location: Cedar Rapids, IA Age: 41 Posts: 145 Vehicle: 2001 Grand Am GT Coupe	alright, they should be ready at latest by Monday Morning, I take paypal, you want the pushrods too?? Just put a note on paypal on what address to mail them too. Marc paypal is twistedindy1@excite.com __________________ Marc

09-03-2009, 07:57 PM	#12
SilverGAGT2002 GTslow AKA: David Join Date: Mar 2009 Location: Odessa, TX Age: 32 Posts: 1,136 Vehicle: 02 Grand Am GT Sedan	Im gonna need the Lower intake manifold aswell if you could give me a price on that too __________________ Nothing Coming soon!

09-03-2009, 08:01 PM	#13
twistedindy1 GAGT - Member AKA: Marc Join Date: Jun 2003 Location: Cedar Rapids, IA Age: 41 Posts: 145 Vehicle: 2001 Grand Am GT Coupe	you need the upper as well, or just lower, I could do upper lower and heads for 250 shipped or just with the lower for $200 shipped. __________________ Marc

09-03-2009, 08:03 PM	#14
SilverGAGT2002 GTslow AKA: David Join Date: Mar 2009 Location: Odessa, TX Age: 32 Posts: 1,136 Vehicle: 02 Grand Am GT Sedan	sounds good let me know when you got pics of the heads and the lim so i can send payment a.s.a.p __________________ Nothing Coming soon!

09-03-2009, 08:05 PM	#15
twistedindy1 GAGT - Member AKA: Marc Join Date: Jun 2003 Location: Cedar Rapids, IA Age: 41 Posts: 145 Vehicle: 2001 Grand Am GT Coupe	alright will do. __________________ Marc

09-06-2009, 09:52 AM	#16
SilverGAGT2002 GTslow AKA: David Join Date: Mar 2009 Location: Odessa, TX Age: 32 Posts: 1,136 Vehicle: 02 Grand Am GT Sedan	any updates? __________________ Nothing Coming soon!

09-06-2009, 01:58 PM	#17
twistedindy1 GAGT - Member AKA: Marc Join Date: Jun 2003 Location: Cedar Rapids, IA Age: 41 Posts: 145 Vehicle: 2001 Grand Am GT Coupe	my friend, where the motor is, has been gone all weekend, but should only take an hour or so to pull apart, so tonight or tomorrow for sure, __________________ Marc

09-06-2009, 03:43 PM	#18
SilverGAGT2002 GTslow AKA: David Join Date: Mar 2009 Location: Odessa, TX Age: 32 Posts: 1,136 Vehicle: 02 Grand Am GT Sedan	Alright man ill keep checking back just keep me updated i have money in my account ready to send t you once i see the condition of the parts __________________ Nothing Coming soon!

09-08-2009, 06:55 AM	#19
twistedindy1 GAGT - Member AKA: Marc Join Date: Jun 2003 Location: Cedar Rapids, IA Age: 41 Posts: 145 Vehicle: 2001 Grand Am GT Coupe	I am going to find time to get there and get pics of the heads and LIM.....I will post them later for you.... __________________ Marc

09-08-2009, 03:24 PM	#20
twistedindy1 GAGT - Member AKA: Marc Join Date: Jun 2003 Location: Cedar Rapids, IA Age: 41 Posts: 145 Vehicle: 2001 Grand Am GT Coupe	got the heads off and they look just fine, only one rod was broken and no tagging of any valves or anything like that, broke down..... Here are some pics...let me know if you still want the stuff. __________________ Marc Last edited by twistedindy1; 12-06-2009 at 06:57 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode