1999 Red SE V6 part out. - Page 3

FromTheInside · 09-20-2009, 01:04 PM

The "airbox" only includes the top part of it, hopefully this is okay. I will take pictures and PM them to you.

mfuller · 09-20-2009, 01:06 PM

Quote:

Originally Posted by FromTheInside

The "airbox" only includes the top part of it, hopefully this is okay. I will take pictures and PM them to you.

Kinda need both halves. Thanx anyway.

FromTheInside · 09-20-2009, 01:31 PM

Okay man

FromTheInside · 09-24-2009, 02:18 PM

Nice A-Pillarssssssssssssssssss without cracked clips!

dudelove45 · 09-24-2009, 03:07 PM

I am interested in the headlights if you still have them? And what about power steering pump? Thanks.

FromTheInside · 09-24-2009, 04:06 PM

Power steering was shot and yes I have the headlights but they're cloudy. Want me to restore them or leave them alone? Restored would cost more.

dudelove45 · 09-24-2009, 04:21 PM

do you have pics of the headlamps? if they're not that bad, i'll do it myself. how much for both unrestored and restored?

FromTheInside · 09-24-2009, 04:30 PM

Shipping is like 30 to you alone man....you're in Canada. Buy new on eBay; it's your best bet.

dudelove45 · 09-24-2009, 05:11 PM

oh ok. i had checked a while back and i had no luck. i just checked and i can actually get some aftermarkets for pretty cheap. thanks again.

FromTheInside · 09-24-2009, 06:39 PM

No prob man you will be happy but TAKE MY ADVICE!

A lot of those aftermarket headlights have cheap weather stripping around them and they look like ****. Both the headlights and taillights are affected so take off your factory weather stripping from the stock headlight and clean it nicely and put it on your aftermarket one if you care a lot about that

. I threw my old lights away before I noticed and I was so pissed

.

dudelove45 · 09-25-2009, 10:53 AM

Are you planning on selling the motor and tranny? Got someone here who might be interested in that and willing to drive and pick it up.

FromTheInside · 09-25-2009, 11:26 AM

I previously posted that they both had 180k on them and were shot. They ran but poorly and have been overheated many times. Overheating changes things so I left them in the car.

TFA · 09-27-2009, 07:00 PM

Im interested in ALL the hardware that connects the front bumper, and front wheel well guards to the car. All the plastic rivet things, and if you can manage to get the christmas tree things out without wrecking them (which is a pain in the ass) those too...please

FromTheInside · 09-27-2009, 10:09 PM

Not sure if people are reading this but I have gotten rid of the car a couple of weeks ago. I have parts the parts listed in the beginning of the thread. The only christmas tree or rivet things I have are the things that attach the door panel to the door. Otherwise they're gone.

r_vest1 · 09-30-2009, 02:46 PM

Do you still have the strut assemblies for sale, both front and rear and how much do you want for them?

FromTheInside · 09-30-2009, 09:14 PM

The front struts were the only ones for sale but I did sell them 2 weeks ago to someone in Albany. I will make sure I update my post to reflect that. Thanks man. Sorry I don't have what you're looking for.

Weman · 09-30-2009, 10:47 PM

Do you have a tan headrest leather with hole?

FromTheInside · 10-01-2009, 03:17 PM

I just sold the headrests last week and no they were the GT-gray style. Thanks for your interest!

FromTheInside · 10-06-2009, 10:31 AM

I may have GT tails and my third brake light up for sale soon!

Jake · 10-06-2009, 10:51 AM

I need a driverside A-Pillar. Price shipped to 48189?

09-27-2009, 07:00 PM	#53
TFA GAGT - Member AKA: Kevin Join Date: Oct 2006 Location: Trenton (The NJ State Capital, NOT Canada, by the way) Age: 34 Posts: 553 Vehicle: 2003 Grand Am GT	Im interested in ALL the hardware that connects the front bumper, and front wheel well guards to the car. All the plastic rivet things, and if you can manage to get the christmas tree things out without wrecking them (which is a pain in the ass) those too...please __________________ Im allowed to take your clothes off ma'am , Im a paramedic. '03 GT. busted front bumper, Dr. speed cold air box, red top, MPR PCM, custom 2.5" mandrel catback to SLP, interior mods. Future: Tons O fun

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-20-2009, 01:04 PM	#41
FromTheInside GAGT - Member AKA: Tom Join Date: Dec 2007 Location: New York Posts: 215 Vehicle: Black '99 Grand Am GT1	The "airbox" only includes the top part of it, hopefully this is okay. I will take pictures and PM them to you.

09-20-2009, 01:31 PM	#43
FromTheInside GAGT - Member AKA: Tom Join Date: Dec 2007 Location: New York Posts: 215 Vehicle: Black '99 Grand Am GT1	Okay man

09-24-2009, 02:18 PM	#44
FromTheInside GAGT - Member AKA: Tom Join Date: Dec 2007 Location: New York Posts: 215 Vehicle: Black '99 Grand Am GT1	Nice A-Pillarssssssssssssssssss without cracked clips!

09-24-2009, 03:07 PM	#45
dudelove45 GAGT Enthusiast AKA: Bryan Join Date: Jul 2007 Location: Chatham, Ontario Age: 34 Posts: 93 Vehicle: 2000 Grand Am GT Sedan	I am interested in the headlights if you still have them? And what about power steering pump? Thanks.

09-24-2009, 04:06 PM	#46
FromTheInside GAGT - Member AKA: Tom Join Date: Dec 2007 Location: New York Posts: 215 Vehicle: Black '99 Grand Am GT1	Power steering was shot and yes I have the headlights but they're cloudy. Want me to restore them or leave them alone? Restored would cost more.

09-24-2009, 04:21 PM	#47
dudelove45 GAGT Enthusiast AKA: Bryan Join Date: Jul 2007 Location: Chatham, Ontario Age: 34 Posts: 93 Vehicle: 2000 Grand Am GT Sedan	do you have pics of the headlamps? if they're not that bad, i'll do it myself. how much for both unrestored and restored?

09-24-2009, 04:30 PM	#48
FromTheInside GAGT - Member AKA: Tom Join Date: Dec 2007 Location: New York Posts: 215 Vehicle: Black '99 Grand Am GT1	Shipping is like 30 to you alone man....you're in Canada. Buy new on eBay; it's your best bet.

09-24-2009, 05:11 PM	#49
dudelove45 GAGT Enthusiast AKA: Bryan Join Date: Jul 2007 Location: Chatham, Ontario Age: 34 Posts: 93 Vehicle: 2000 Grand Am GT Sedan	oh ok. i had checked a while back and i had no luck. i just checked and i can actually get some aftermarkets for pretty cheap. thanks again.

09-24-2009, 06:39 PM	#50
FromTheInside GAGT - Member AKA: Tom Join Date: Dec 2007 Location: New York Posts: 215 Vehicle: Black '99 Grand Am GT1	No prob man you will be happy but TAKE MY ADVICE! A lot of those aftermarket headlights have cheap weather stripping around them and they look like ****. Both the headlights and taillights are affected so take off your factory weather stripping from the stock headlight and clean it nicely and put it on your aftermarket one if you care a lot about that . I threw my old lights away before I noticed and I was so pissed .

09-25-2009, 10:53 AM	#51
dudelove45 GAGT Enthusiast AKA: Bryan Join Date: Jul 2007 Location: Chatham, Ontario Age: 34 Posts: 93 Vehicle: 2000 Grand Am GT Sedan	Are you planning on selling the motor and tranny? Got someone here who might be interested in that and willing to drive and pick it up.

09-25-2009, 11:26 AM	#52
FromTheInside GAGT - Member AKA: Tom Join Date: Dec 2007 Location: New York Posts: 215 Vehicle: Black '99 Grand Am GT1	I previously posted that they both had 180k on them and were shot. They ran but poorly and have been overheated many times. Overheating changes things so I left them in the car.

09-27-2009, 10:09 PM	#54
FromTheInside GAGT - Member AKA: Tom Join Date: Dec 2007 Location: New York Posts: 215 Vehicle: Black '99 Grand Am GT1	Not sure if people are reading this but I have gotten rid of the car a couple of weeks ago. I have parts the parts listed in the beginning of the thread. The only christmas tree or rivet things I have are the things that attach the door panel to the door. Otherwise they're gone.

09-30-2009, 02:46 PM	#55
r_vest1 GAGT - Newbie Join Date: Apr 2005 Location: Vinton, Ia Age: 52 Posts: 8 Vehicle: 2000 Grand Am GT Sedan	Do you still have the strut assemblies for sale, both front and rear and how much do you want for them?

09-30-2009, 09:14 PM	#56
FromTheInside GAGT - Member AKA: Tom Join Date: Dec 2007 Location: New York Posts: 215 Vehicle: Black '99 Grand Am GT1	The front struts were the only ones for sale but I did sell them 2 weeks ago to someone in Albany. I will make sure I update my post to reflect that. Thanks man. Sorry I don't have what you're looking for.

09-30-2009, 10:47 PM	#57
Weman GAGT - Member AKA: James Join Date: Nov 2008 Location: Ontario, Canada Posts: 435 Vehicle: 1990 Grand Am GT Coupe	Do you have a tan headrest leather with hole?

10-01-2009, 03:17 PM	#58
FromTheInside GAGT - Member AKA: Tom Join Date: Dec 2007 Location: New York Posts: 215 Vehicle: Black '99 Grand Am GT1	I just sold the headrests last week and no they were the GT-gray style. Thanks for your interest!

10-06-2009, 10:31 AM	#59
FromTheInside GAGT - Member AKA: Tom Join Date: Dec 2007 Location: New York Posts: 215 Vehicle: Black '99 Grand Am GT1	I may have GT tails and my third brake light up for sale soon!

10-06-2009, 10:51 AM	#60
Jake BRAAAPPP AKA: Jake Join Date: Feb 2007 Location: Cen Cal Age: 34 Posts: 3,725 Vehicle: Hellcat Challenger	I need a driverside A-Pillar. Price shipped to 48189?